Frontmatter

Articles in the same Issue

1. Frontmatter
2. Original articles
3. Experimental study on the mechanical properties of an epoxy-based nanocomposite using polymeric alloying and different nano-reinforcements: nanofiber, nanolayered and nanoparticulate materials
4. A new method for preparation of low melting point polyamide-6 (LPA6) and properties of compatibilized blends of LPA6/glass beads/styrene and maleic anhydride copolymer
5. The effect of zeolite particle modified by PEG on rubber composite properties
6. Investigation of the effect of microstructural parameters on the initial yield surface of non-isothermal composites
7. The relationship between geotechnical index properties and the pore-size distribution of compacted clayey silts
8. Evaluation of new GFRTP and CFRTP using epsilon caprolactam as matrix fabricated with VaRTM
9. Two-step gradation of particle size in an inorganic-organic hybrid
10. Degradation of basalt FRP bars in alkaline environment
11. Effects of B and V on microstructure of FeCrC cladding layers on the surface of Q235B mild steel by TIG welding
12. Microstructural and mechanical properties of Cu-7vol.%ZrB₂ alloy produced by powder metallurgy techniques
13. Effect of consolidation parameters and heat treatment on microstructures and mechanical properties of SiCp/2024 Al composites
14. Experimental investigation of process parameters for WEDM of Ti-6Al-4V/TiN composites
15. Three-dimensional natural frequency analysis of anisotropic functionally graded annular sector plates resting on elastic foundations
16. Energy absorption rate of composite tube as a function of stacking sequence using finite element method