Enhancing the physico-mechanical properties of irradiated rubber/waste plastic blend via incorporation of different fillers for industrial applications
Abstract
The effect of gamma radiation on the physico-mechanical properties of ethylene propylene diene monomer rubber/styrene butadiene rubber/waste high density polyethylene blend EPDM/SBR/wHDPE (50/50/30) blend reinforced with different types of fillers 10 phr (part per 100 part of rubber, by weight) of HAF-carbon black, Hisil, and prepared modified organo-montmorillonite (OMMT) clay was investigated. The results obtained showed that the organo-montmorillonite (OMMT) clay is the most effective filler for enhancing the physico-mechanical properties of EPDM/SBR/wHDPE vulcanized composites. Scanning electron microscopy and thermogravimetric analysis characteristics were also, studied.
References
1. Sarker, M., Mamunor, M. R., Molla, M., Rahman, M. d. S.: High density polyethylene (HDPE-2) and polyethylene (PS-6) waste Plastic mixture turn into valuable fuel energy. J. Int. Sci. Publ.: Mater. Methods Tech. 5, 1313 (2011).10.5923/j.ep.20120205.02Search in Google Scholar
2. Xu, D., Karger-Kocsis, J., Schlarb, A. K.: Rolling wear of EPDM and SBR rubbers as a function of carbon black contents: correlation with microhardness. J. Mater. Sci. 43, 4330 (2008).10.1007/s10853-008-2637-7Search in Google Scholar
3. Datta, S.: Encyclopedia of polymer blends. In: A. I. Isayev (Ed.), Rubber–Plastic Blends: Structure–Property Relationship (2016), Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany. Available at: https://doi.org/10.1002/9783527653966.ch4.10.1002/9783527653966.ch4Search in Google Scholar
4. Choi, S. S., Nah, C., Lee, S. G., Joo, C. W.: Effect of filler-filler interaction on rheological behaviour of natural rubber compounds filled with both carbon black and silica. Polym. Int. 52, 23 (2003).10.1002/pi.975Search in Google Scholar
5. Heinrich, G., Kluppel, M., Vilgis, T. A.: Reinforcement of elastomers. Solid State Mater. Sci. 6, 195 (2002).10.1016/S1359-0286(02)00030-XSearch in Google Scholar
6. Okada, A., Usuki, A.: The chemistry of polymer-clay hybrids. Mater. Sci. Eng. C 3, 109 (1995).10.1016/0928-4931(95)00110-7Search in Google Scholar
7. Ray, S., Okamoto, M.: Polymer/layered silicate nano-composites: a review from preparation to processing. Prog. Polym. Sci. 28, 1539 (2003).10.1016/j.progpolymsci.2003.08.002Search in Google Scholar
8. Bergaya, F., Lagaly, G.: General Introduction: Clays, Clay Minerals, and Clay Science. Handbook of Clay Science. Elsevier Ltd., kidlington, Oxford, UK (2006), p. 1.10.1016/S1572-4352(05)01001-9Search in Google Scholar
9. Pavlidou, S., Papaspyrides, C. D.: A review on polymer-layered silicate nanocomposites. Prog. Polym. Sci. 33, 1119 (2008).10.1016/j.progpolymsci.2008.07.008Search in Google Scholar
10. Choudalakis, G., Gotsis, A. D.: Permeability of polymer/clay nano-composites: a review. Eur. Polym. J. 45, 967 (2009).10.1016/j.eurpolymj.2009.01.027Search in Google Scholar
11. Lugao, A. B., Artel, B. W. H., Yoshiga, A., Lima, L. F. C. P., Parra, D. F., Bueno, J. R., Liberman, S., Farrah, M., Tercariol, W. R., Otaguro, H.: Production of high melt strength polypropylene by gamma irradiation. Radiat. Phys. Chem. 76, 1691 (2007).10.1016/j.radphyschem.2007.03.013Search in Google Scholar
12. Chmielewski, A. G., Haji-Saeid, M., Ahmed, S.: Progress in radiation processing of polymers. Nucl. Instrum. Methods Phys. Res. Sect. B 236, 44 (2005).10.1016/j.nimb.2005.03.247Search in Google Scholar
13. Chapiro, A.: Radiation Chemistry of Polymeric System, High Polymers, Vol. 15, Interscience Publishers, New York (1962), p. 379.Search in Google Scholar
14. Singh, A., Silverman, J.: Radiation Processing of Polymers, Silverman, Hanser, Munich (1992), p. 14.Search in Google Scholar
15. van Gisbergen, J. G. M., Overbergh, N.: Radiation effects on polymer blends. In: A. Singh, J. Silverman (Eds.), Radiation Processing of Polymers, Hanser, Munich (1992), p. 51.Search in Google Scholar
16. Li, Y., Liu, L., Zhang, W., Fang, Y.: A new hybrid nanocomposites prepared by graft copolymerization of butyl acrylate onto chitosan in the presence organophilic montmorillonite. Radiat. Phys. Chem. 69, 461 (2004).10.1016/j.radphyschem.2003.10.012Search in Google Scholar
17. Goldstein, J.: Scanning Electron Microscopy and X-Ray Microanalysis. Springer. ISBN 978-0-306-47292-3. Retrieved 26 May 2012.Search in Google Scholar
18. Vaia, R. A., Giannelis, E. P.: Polymer nanocomposites: status and opportunities. MRS Bull. 26, 394 (2001).10.1557/mrs2001.93Search in Google Scholar
19. De Boer, J., Penning, L.: The effect of pendant chains on the elasticity behavior of polyethylene networks. Colloid Polym. Sci. 261, 750 (1983).10.1007/BF01410949Search in Google Scholar
20. Banik, I., Bhowmick, A. K.: Effect of electron beam irradiation on the properties of crosslinked rubbers. Radiat. Phys. Chem. 58, 293 (2000).10.1016/S0969-806X(99)00371-0Search in Google Scholar
21. Zhang, W., Li, Y., Wei, L., Fang, Y.: In situ intercalative polymerization of poly(methyl methacrylate)/clay nano-composites by γ-ray irradiation. Mater. Lett. 4342, 1 (2003).Search in Google Scholar
22. Mohamed, M. A., Mounir, R., Shaltout, N. A.: Radiation vulcanization of filler-reinforced natural rubber/styrene butadiene rubber blends. J. Reinf. Plast. Comp. 31, 597 (2012).10.1177/0731684412440515Search in Google Scholar
23. Essawy, H., El-Nashar, D.: The use of montmorillonite as a reinforcing and compatibilizing filler for NBR/SBR rubber blend. Polym. Test. 23, 803 (2004).10.1016/j.polymertesting.2004.03.003Search in Google Scholar
©2019 Walter de Gruyter GmbH, Berlin/Boston
Articles in the same Issue
- Frontmatter
- Editorial
- Editorial
- Original papers
- Integral measurement of spectrum-averaged cross sections of a few threshold reactions induced by fast neutrons of a TRIGA reactor: comparison with integrated data from excitation functions given in various data libraries
- Quantum chemical studies of selective back-extraction of Am(III) from Eu(III) and Cm(III) with two hydrophilic 1,10-phenanthroline-2,9-bis-triazolyl ligands
- Luminescence of uranium(VI) after liquid-liquid extraction from HCl by Aliquat® 336 in n-dodecane:1-decanol by time-resolved laser-induced luminescence spectroscopy
- Volume oxidation of uranium mononitride and uranium monocarbide in the dry NOX-gaseous atmosphere
- Interference of Zr(IV) during the extraction of trivalent Nd(III) from the aqueous waste generated from metallic fuel reprocessing
- Mild and efficient 64Cu labeling of perhydro-1, 4-diazepine derivatives for potential use with large peptides, proteins and antibodies
- 68Ga CdTe/CdS fluorescent quantum dots for detection of tumors: investigation on the effect of nanoparticle size on stability and in vivo pharmacokinetics
- Natural radioactivity, radon emanating power and mass exhalation rate of environmental soil samples from Karabük province, Turkey
- Enhancing the physico-mechanical properties of irradiated rubber/waste plastic blend via incorporation of different fillers for industrial applications
- Corrigendum
- Corrigendum to: Effect of humic acid, fulvic acid, pH, ionic strength and temperature on 63Ni(II) sorption to MnO2
Articles in the same Issue
- Frontmatter
- Editorial
- Editorial
- Original papers
- Integral measurement of spectrum-averaged cross sections of a few threshold reactions induced by fast neutrons of a TRIGA reactor: comparison with integrated data from excitation functions given in various data libraries
- Quantum chemical studies of selective back-extraction of Am(III) from Eu(III) and Cm(III) with two hydrophilic 1,10-phenanthroline-2,9-bis-triazolyl ligands
- Luminescence of uranium(VI) after liquid-liquid extraction from HCl by Aliquat® 336 in n-dodecane:1-decanol by time-resolved laser-induced luminescence spectroscopy
- Volume oxidation of uranium mononitride and uranium monocarbide in the dry NOX-gaseous atmosphere
- Interference of Zr(IV) during the extraction of trivalent Nd(III) from the aqueous waste generated from metallic fuel reprocessing
- Mild and efficient 64Cu labeling of perhydro-1, 4-diazepine derivatives for potential use with large peptides, proteins and antibodies
- 68Ga CdTe/CdS fluorescent quantum dots for detection of tumors: investigation on the effect of nanoparticle size on stability and in vivo pharmacokinetics
- Natural radioactivity, radon emanating power and mass exhalation rate of environmental soil samples from Karabük province, Turkey
- Enhancing the physico-mechanical properties of irradiated rubber/waste plastic blend via incorporation of different fillers for industrial applications
- Corrigendum
- Corrigendum to: Effect of humic acid, fulvic acid, pH, ionic strength and temperature on 63Ni(II) sorption to MnO2