Abstract
The potential sources of metals from energy industries are discussed. The discussion is organized based on two main metal-contains wastes from power plants: ashes, slags from combustion process and spent catalysts from selective catalytic NOx reduction process with ammonia, known as SCR. The compositions, methods of metals recovery, based mainly on leaching process, and their further application are presented. Solid coal combustion wastes are sources of various compounds such as silica, alumina, iron oxide, and calcium. In the case of the spent SCR catalysts mainly two metals are considered: vanadium and tungsten – basic components of industrial ones.
Reference
[1] Zamaraev KI. Catalytic science and technology for environmental issues. Catal Today. 1997;35:3–13.10.1016/S0920-5861(96)00129-0Search in Google Scholar
[2] International Energy Outlook 2017, #IEO2017. U.S. Energy Information Administration, September 14, 2017. Available at: www.eia.gov/ieo.Search in Google Scholar
[3] Madejski P, Janda T, Modliñski N, Daniel N. A combustion process optimization and numerical analysis for the low emission operation of pulverized coal-fired boiler. In: Kyprianidis KG, Skvaril J, editors. Developments in combustion technology. Rijeka, Croatia: InTech, 2016:33–75.Search in Google Scholar
[4] Beér JM. Combustion technology developments in power generation in response to environmental challenges. Prog Energy Combust Sci. 2000;26:301–27.10.1016/S0360-1285(00)00007-1Search in Google Scholar
[5] Wall T, Liu Y, Spero C, Elliott L, Khare S, Rathnam R, et al. An overview on oxyfuel coal combustion – state of the art research and technology development. Chem Eng Res Design. 2009;87:1003–16.10.1016/j.cherd.2009.02.005Search in Google Scholar
[6] Mahmoudi S, Baeyens J, Seville JP. NOx formation and selective non-catalytic reduction (SNCR) in a fluidized bed combustor of biomass. Biomass Bioenergy. 2010;34:1393–409.10.1016/j.biombioe.2010.04.013Search in Google Scholar
[7] Kim SW, Heckel A, McKeen SA, Frost GJ, Hsie EY, Trainer MK, et al. Power plant NOx emission reductions and their impact on air quality. Geophys Res Lett. 2006;33(L2281):1–5.10.1029/2006GL027749Search in Google Scholar
[8] Klingstedt F, Arve K, Eränen K, Murzin DY. Toward improved catalytic low-temperature NOx removal in diesel-powered vehicles. Acc Chem Res. 2006;39:273–82.10.1021/ar050185kSearch in Google Scholar PubMed
[9] Phil HH, Reddy MP, Kumar PA, Ju LK, Hyo JS. SO2 resistant antimony promoted V2O5/TiO2 catalyst for NH3-SCR of NOx at low temperatures. Appl Catal B. 2008;78:301–08.10.1016/j.apcatb.2007.09.012Search in Google Scholar
[10] Forzatti P. Present status and perspectives in de-NOx SCR catalysis. Appl Catal A. 2001;222:221–36.10.1016/S0926-860X(01)00832-8Search in Google Scholar
[11] Schreifels JJ, Wang S, Hao J. Design and operational considerations for selective catalytic reduction technologies at coal-fired boilers. Front Energy. 2012;6:98–105.10.1007/s11708-012-0171-4Search in Google Scholar
[12] Matsuda S, Kamo T, Kato A, Nakajima F, Kumura T, Kuroda H. Deposition of ammonium bisulfate in the selective catalytic reduction of nitrogen oxides with ammonia. Ind Eng Chem Prod Res Develop. 1982;21:48–52.10.1021/i300005a009Search in Google Scholar
[13] Srivastava RK, Miller CA, Erickson C, Jambhekar R. Emissions of sulfur trioxide from coal-fired power plants. J Air Waste Manag Assoc. 2004;54:750–62.10.1080/10473289.2004.10470943Search in Google Scholar PubMed
[14] Kim CH, Woo SI, Jeon SH. Recovery of platinum-group metals from recycled automotive catalytic converters by carbochlorination. Ind Eng Chem Res. 2000;39:1185–92.10.1021/ie9905355Search in Google Scholar
[15] Lietti L, Nova I, Forzatti P. Selective catalytic reduction (SCR) of NO by NH3 over TiO2-supported V2O5–WO3 and V2O5–MoO3 catalysts. Top Catal. 2000;11:111–22.10.1023/A:1027217612947Search in Google Scholar
[16] Hums E. A catalytically highly-active, arsenic oxide resistant V-Mo-O phase – results of studying intermediates of the deactivation process of V2O5-MoO3-TiO2 (ANATASE) DeNOx catalysts. Res Chem Intermed. 1993;19:419–41.10.1163/156856793X00208Search in Google Scholar
[17] Chen JP, Hausladen MC, Yang RT. Delaminated Fe2O3-pillared clay: its preparation, characterization, and activities for selective catalytic reduction of NO by NH3. J Catal. 1995;151:135–46.10.1006/jcat.1995.1016Search in Google Scholar
[18] Li J, Chang H, Ma L, Hao J, Yang RT. Low-temperature selective catalytic reduction of NOx with NH3 over metal oxide and zeolite catalysts – A review. Catal Today. 2011;175:147–56.10.1016/j.cattod.2011.03.034Search in Google Scholar
[19] Yang S, Li J, Wang C, Chen J, Ma L, Chang H, et al. Fe–Ti spinel for the selective catalytic reduction of NO with NH3: mechanism and structure–activity relationship. Appl Catal B. 2012;117–118:73–80.10.1016/j.apcatb.2012.01.001Search in Google Scholar
[20] Liu F, He H. Selective catalytic reduction of NO with NH3 over manganese substituted iron titanate catalyst: reaction mechanism and H2O/SO2 inhibition mechanism study. Catal Today. 2010;153:70–76.10.1016/j.cattod.2010.02.043Search in Google Scholar
[21] Apostolescu N, Geiger B, Hizbullah K, Jan MT, Kureti S, Reichert D, et al. Selective catalytic reduction of nitrogen oxides by ammonia on iron oxide catalysts. Appl Catal B. 2006;62:104–14.10.1016/j.apcatb.2005.07.004Search in Google Scholar
[22] Qi G, Yang R. Low-temperature SCR of NO with NH3 over noble metal promoted Fe-ZSM-5 catalysts. Catal Lett. 2005;100:243–46.10.1007/s10562-004-3462-5Search in Google Scholar
[23] Kumar A, Smith MA, Kamasamudram K, Currier NW, Yezerets A. Chemical deSOx: an effective way to recover Cu-zeolite SCR catalysts from sulfur poisoning. Catal Today. 2016;267:10–16.10.1016/j.cattod.2016.01.033Search in Google Scholar
[24] Putluru SS, Riisager A, Fehrmann R. Alkali resistant Cu/zeolite deNOx catalysts for flue gas cleaning in biomass fired applications. Appl Catal B. 2011;101:183–88.10.1016/j.apcatb.2010.09.015Search in Google Scholar
[25] Oord R, Ten Have IC, Arends JM, Hendriks FC, Schmidt J, Lezcano-Gonzalez I, et al. Enhanced activity of desilicated Cu-SSZ-13 for the selective catalytic reduction of NOx and its comparison with steamed Cu-SSZ-13. Catal Sci Technol. 2017;7:3851–62.10.1039/C7CY00798ASearch in Google Scholar
[26] Brandenberger S, Kröcher O, Tissler A, Althoff R. The state of the art in selective catalytic reduction of NOx by ammonia using metal ‐exchanged zeolite catalysts. Catal Rev. 2008;50:492–531.10.1080/01614940802480122Search in Google Scholar
[27] Busca G, Lietti L, Ramis G, Berti F. Chemical and mechanistic aspects of the selective catalytic reduction of NOx by ammonia over oxide catalysts: A review. Appl Catal B. 1998;18:1–36.10.1016/S0926-3373(98)00040-XSearch in Google Scholar
[28] Roy S, Hegde MS, Madras G. Catalysis for NOx abatement. Appl Energ. 2009;86:2283–97.10.1016/j.apenergy.2009.03.022Search in Google Scholar
[29] Domingo JL. Vanadium and tungsten derivatives as antidiabetic agents. Biol Trace Elem Res. 2002;88:97–112.10.1385/BTER:88:2:097Search in Google Scholar PubMed
[30] Chen L, Li J, Ge M, Zhu R. Enhanced activity of tungsten modified CeO2/TiO2 for selective catalytic reduction of NOx with ammonia. Catal Today. 2010;153:77–83.10.1016/j.cattod.2010.01.062Search in Google Scholar
[31] Gao X, Jiang Y, Fu U, Zhong Y, Luo Z, Cen K. Preparation and characterization of CeO2/TiO2 catalysts for selective catalytic reduction of NO with NH3. Catal Commun. 2010;11:465–69.10.1016/j.catcom.2009.11.024Search in Google Scholar
[32] Gao X, Jiang Y, Zhong Y, Luo Z, Cen K. The activity and characterization of CeO2-TiO2 catalysts prepared by the sol-gel method for selective catalytic reduction of NO with NH3. J Hazard Mater. 2010;174:734–39.10.1016/j.jhazmat.2009.09.112Search in Google Scholar PubMed
[33] Chang H, Ma L, Yang S, Li Y, Chen L, Wang W, et al. Comparison of preparation methods for ceria catalyst and the effect of surface and bulk sulfates on its activity toward NH3-SCR. J Hazard Mater. 2013;262:782–88.10.1016/j.jhazmat.2013.09.043Search in Google Scholar PubMed
[34] Kumar PA, Jeong YE, Gautam S, Ha HP, Lee KJ, Chae KH. XANES and DRIFTS study of sulfated Sb/V/Ce/TiO2 catalysts for NH3-SCR. Chem Eng J. 2015;275:142–51.10.1016/j.cej.2015.03.124Search in Google Scholar
[35] Lee KJ, Kumar PA, Maqbool MS, Rao KN, Song KH, Ha HP. Ceria added Sb-V2O5/TiO2 catalysts for low temperature NH3 SCR: physico-chemical properties and catalytic activity. Appl Catal B. 2013;142–143:705–17.10.1016/j.apcatb.2013.05.071Search in Google Scholar
[36] Sheng Z, Hu Y, Xue J, Wang X, Liao W. SO2 poisoning and regeneration of Mn-Ce/TiO2 catalyst for low temperature NOx reduction with NH3. J Rare Earth. 2012;30:676–82.10.1016/S1002-0721(12)60111-2Search in Google Scholar
[37] Yan D, Yu Y, Huang X, Liu S, Liu Y. Poisoning effect of SO2 on Mn-Ce/TiO2 catalysts for NO reduction by NH3 at low temperature. J Fuel Chem Technol. 2016;44:232–38.10.1016/S1872-5813(16)30011-1Search in Google Scholar
[38] Shen B, Zhang X, Ma H, Yao Y, Liu T. A comparative study of Mn/CeO2, Mn/ZrO2 and Mn/Ce-ZrO2 for low temperature selective catalytic reduction of NO with NH3 in the presence of SO2 and H2O. J Environ Sci. 2013;25:791–800.10.1016/S1001-0742(12)60109-0Search in Google Scholar
[39] Yu J, Guo F, Wang Y, Zhu J, Liu Y, Su F, et al. Sulfur poisoning resistant mesoporous Mn-base catalyst for low-temperature SCR of NO with NH3. Appl Catal B. 2010;95:160–68.10.1016/j.apcatb.2009.12.023Search in Google Scholar
[40] Chang H, Li J, Yuan J, Chen L, Dai Y, Arandiyan H, et al. Ge, Mn-doped CeO2–WO3 catalysts for NH3–SCR of NOx: Effects of SO2 and H2 regeneration. Catal Today. 2013;201:139–44.10.1016/j.cattod.2012.03.027Search in Google Scholar
[41] Jing W, Guo Q, Hou Y, Ma G, Han X, Huang Z. Catalytic role of vanadium(V) sulfate on activated carbon for SO2 oxidation and NH3-SCR of NO at low temperatures. Catal Commun. 2014;56:23–26.10.1016/j.catcom.2014.06.017Search in Google Scholar
[42] Shang X, Hu G, He C, Zhao J, Zhang F, Xu Y, et al. Regeneration of full-scale commercial honeycomb monolith catalyst (V2O5–WO3/TiO2) used in coal-fired power plant. J Ind Eng Chem. 2012;18:513–19.10.1016/j.jiec.2011.11.070Search in Google Scholar
[43] Tang F, Xu B, Shi H, Qiu J, Fan Y. The poisoning effect of Na+ and Ca2+ ions doped on the V2O5/TiO2 catalysts for selective catalytic reduction of NO by NH3. Appl Catal B. 2010;94:71–76.10.1016/j.apcatb.2009.10.022Search in Google Scholar
[44] Klimczak M, Kern P, Heinzelmann T, Lucas M, Claus P. High-throughput study of the effects of inorganic additives and poisons on NH3-SCR catalysts – part I: V2O5–WO3/TiO2 catalysts. Appl Catal B. 2010;95:39–47.10.1016/j.apcatb.2009.12.007Search in Google Scholar
[45] Niksa S, Krishnakumar B, Ghoreish F. Analytical management of SCR catalyst lifetimes and multipollutant performance. J Air Waste Manag Assoc. 2016;66:215–23.10.1080/10962247.2015.1107658Search in Google Scholar PubMed
[46] Yu Y, He C, Chen J, Meng X. Deactivation mechanism of de-NOx catalyst (V2O5-WO3/TiO2) used in coal fired power plant. J Fuel Chem Technol. 2012;40:1359–65.10.1016/S1872-5813(13)60003-1Search in Google Scholar
[47] Li Q, Liu Z, Liu Q. Kinetics of vanadium leaching from a spent industrial V2O5/TiO2 catalyst by sulfuric acid. Ind Eng Chem Res. 2014;53:2956–62.10.1021/ie401552vSearch in Google Scholar
[48] Zheng Y, Jensen AD, Johnsson JE. Laboratory investigation of selective catalytic reduction catalysts: deactivation by potassium compounds and catalyst regeneration. Ind Eng Chem Res. 2004;43:941–47.10.1021/ie030404aSearch in Google Scholar
[49] Khodayari R, Odenbrand CU. Regeneration of commercial SCR catalysts by washing and sulphation: effect of sulphate groups on the activity. Appl Catal B. 2001;33:277–91.10.1016/S0926-3373(01)00193-XSearch in Google Scholar
[50] Wu WC, Tsai TY, Shen YH. Tungsten recovery from spent SCR catalyst using alkaline leaching and ion exchange. Minerals. 2016;6(107):1–12.10.3390/min6040107Search in Google Scholar
[51] Zeng R. Reclamation and recycling of SCR waste catalyzer. China Environ Protect Ind. 2013;2:39–42.Search in Google Scholar
[52] Lee W, Bae GN. Removal of elemental mercury (Hg(0)) by nanosized V2O5/TiO2 catalysts. Environ Sci Technol. 2009;43:1522–27.10.1021/es802456ySearch in Google Scholar
[53] Mercury Study Report to Congress. U. S. Government Printing Office: Washington, DC, 1997.Search in Google Scholar
[54] Vidic RD, Siler DP. Vapor-phase elemental mercury adsorption by activated carbon impregnated with chloride and chelating agents. Carbon. 2001;39:3–14.10.1016/S0008-6223(00)00081-6Search in Google Scholar
[55] Granite E, Pennline H, Hargis R. Novel sorbents for mercury removal from flue gas. Ind Eng Chem Res. 2000;39:1020–29.10.1021/ie990758vSearch in Google Scholar
[56] Li Y, Murphy P, Wu C, Powers K, Bonjongo J. Development of silica/vanadia/titania catalysts for removal of elemental mercury from coal-combustion flue gas. Environ Sci Technol. 2008;42:5304–09.10.1021/es8000272Search in Google Scholar PubMed
[57] Kamata H, Ueno SI, Naito T, Yukimura A. Mercury oxidation over the V2O5(WO3)/TiO2 commercial SCR catalyst. Ind Eng Chem Res. 2008;47:8136–41.10.1021/ie800363gSearch in Google Scholar
[58] Senior CL. Oxidation of mercury across selective catalytic reduction catalysts in coal–fired power plants. J Air Waste Manag Assoc. 2005;56:23–31.10.1080/10473289.2006.10464437Search in Google Scholar PubMed
[59] Niksa S, Fujiwara N. A predictive mechanism for mercury oxidation on selective catalytic reduction catalysts under coal-derived flue gas. J Air Waste Manag Assoc. 2005;55:1866–75.10.1080/10473289.2005.10464779Search in Google Scholar PubMed
[60] Zhao YX, Mann MD, Pavlish JH, Mibeck BA, Dunham GE, Olson ES. Application of gold catalyst for mercury oxidation by chlorine. Environ Sci Technol. 2006;40:1603–08.10.1021/es050165dSearch in Google Scholar PubMed
[61] Yan N, Chen W, Chen J, Qu Z, Guo Y, Yang S, et al. Significance of RuO2 modified SCR catalyst for elemental mercury oxidation in coal-fired flue gas. Environ Sci Technol. 2011;45:5725–30.10.1021/es200223xSearch in Google Scholar PubMed
[62] Li JF, Yan NQ, Qu Z, Qiao SH, Yang SJ, Guo YF, et al. Catalytic oxidation of elemental mercury over the modified catalyst Mn/alpha-Al2O3 at lower temperatures. Environ Sci Technol. 2010;44:426–31.10.1021/es9021206Search in Google Scholar PubMed
[63] Qiao SH, Chen J, Li JF, Qu Z, Liu P, Yan NQ, et al. Adsorption and catalytic oxidation of gaseous elemental mercury in flue gas over MnOx/aumina. Ind Eng Chem Res. 2009;48:3317–22.10.1021/ie801478wSearch in Google Scholar
[64] Gao F, Tang X, Yi H, Zhao S, Zhang T, Li D, et al. The poisoning and regeneration effect of alkali metals deposed over commercial V2O5-WO3/TiO2 catalysts on SCR of NO by NH3. Chin Sci Bull. 2014;59:3966–72.10.1007/s11434-014-0496-ySearch in Google Scholar
[65] Chen L, Li JH, Ge MF. The poisoning effect of alkali metals doping over nano V2O5-WO3/TiO2 catalysts on selective catalytic reduction of NOx by NH3. Chem Eng J. 2011;170:531–37.10.1016/j.cej.2010.11.020Search in Google Scholar
[66] Larsson AC, Einvall J, Andersson A, Sanati M. Targeting by comparison with laboratory experiments the SCR catalyst deactivation process by potassium and zinc salts in a large-scale biomass combustion boiler. Energy Fuels. 2006;20:1398–405.10.1021/ef060077uSearch in Google Scholar
[67] Kamata H, Takahashi K, Odenbrand CU. The Role of K2O in the selective reduction of NO with NH3 over a V2O5-WO3/TiO2 commercial selective catalytic reduction catalyst. J Mol Catal A. 1999;139:189–98.10.1016/S1381-1169(98)00177-0Search in Google Scholar
[68] Lisi L, Lasorella G, Malloggi S, Russo G. Single and combined deactivating effect of alkali metals and HCl on commercial SCR catalysts. Appl Catal B. 2004;50:251–58.10.1016/j.apcatb.2004.01.007Search in Google Scholar
[69] Xue Y, Zhang Y, Zhang Y, Zheng S, Zhang Y, Jin W. Electrochemical detoxification and recovery of spent SCR catalyst by in-situ generated reactive oxygen species in alkaline media. Chem Eng J. 2017;325:544–53.10.1016/j.cej.2017.05.113Search in Google Scholar
[70] Zheng Y, Jensen AD, Johnsson JE. Deactivation of V2O5-WO3-TiO2 SCR catalyst at a biomass-fired combined heat and power plant. Appl Catal B. 2005;60:253–64.10.1016/j.apcatb.2005.03.010Search in Google Scholar
[71] Peng Y, Li J, Si W, Luo J, Wang Y, Fu J, et al. Deactivation and regeneration of a commercial SCR catalyst: comparison with alkali metals and arsenic. Appl Catal B. 2015;168–169:195–202.10.1016/j.apcatb.2014.12.005Search in Google Scholar
[72] Kim H, Lee J, Kim J. Leaching of vanadium and tungsten from spent SCR catalysts for De-NOx by soda roasting and water leaching method. J Korean Inst Resour Recycl. 2012;21:65–73.10.7844/kirr.2012.21.6.65Search in Google Scholar
[73] Yu Y, He C, Chen J, Yin L, Qiu T, Meng X. Regeneration of deactivated commercial SCR catalyst by alkali washing. Catal Commun. 2013;39:78–81. ISSN 1566-7367.10.1016/j.catcom.2013.05.010Search in Google Scholar
[74] Kim JW, Lee WG, Hwang IS, Lee JY, Han C. Recovery of tungsten from spent selective catalytic reduction catalysts by pressure leaching. J Ind Eng Chem. 2015;28:73–77.10.1016/j.jiec.2015.02.001Search in Google Scholar
[75] Jia Y, Ding W, Ding X, Chen Y, Zhong Q. The leaching of tungsten and vanadium from spent selective catalytic reduction catalyst. Huanjing Kexue Xuebao/Acta Scientiae Circumstantiae. 2016;36:3759–64.Search in Google Scholar
[76] García-Bordejé E, Lázaro MJ, Moliner R, Galindo JF, Sotres J, Baró AM. Structure of vanadium oxide supported on mesoporous carbon-coated monoliths and relationship with its catalytic performance in the SCR of NO at low temperatures. J Catal. 2004;223:395–403.10.1016/j.jcat.2004.02.018Search in Google Scholar
[77] Huo Y, Chang Z, Li W, Liu S, Dong B. Reuse and valorization of vanadium and tungsten from waste V2O5–WO3/TiO2 SCR catalyst. Waste Biomass Valorization. 2015;6:159–65.10.1007/s12649-014-9335-2Search in Google Scholar
[78] Zhang C, Liu J, Yang X, Wu F, Xia Q, Li Z. Ultrasound assisted enhancement in vanadium and tungsten leaching from waste SCR catalyst. Gongneng Cailiao/J Functional Mater. 2015;46:20063–67.Search in Google Scholar
[79] Tang D, Song H, Liu D, Wu W, Zheng C, Gao X. Study on leaching kinetics of extracting vanadium and tungsten by sodium hydroxide from spent SCR catalyst. Chin J Environ Eng. 2017;11:1093–100.Search in Google Scholar
[80] Choi IH, Kang JS, Kumar JR, Mun GH, Lee JY. Extraction of tungsten and vanadium from spent SCR catalyst with caustic soda by autoclave process. EARTH 2015 – Proceedings of the 13th International Symposium on East Asian Resources Recycling Technology, 2015:354–56.Search in Google Scholar
[81] Qi C, Bao W, Wang L, Li H, Wu W. Study of the V2O5-WO3/TiO2 catalyst synthesized from waste catalyst on selective catalytic reduction of NOx by NH3. Catalysts. 2017;7(110):1–13.10.3390/catal7040110Search in Google Scholar
[82] Fu H, Lin J, Zhang L, Zhu Y. Photocatalytic activities of a novel ZnWO4 catalyst prepared by a hydrothermal process. Appl Catal A. 2006;306:58–67.10.1016/j.apcata.2006.03.040Search in Google Scholar
[83] Huang G, Zhang C, Zhu Y. ZnWO4 photocatalyst with high activity for degradation of organic contaminants. J Alloys Compd. 2007;432:269–76.10.1016/j.jallcom.2006.05.109Search in Google Scholar
[84] Guo H, Guo D, Zheng Z, Wen W, Chen J. Hydrothermal synthesis and visible light photocatalytic activities of Zn3(VO4)2 nanorods. J Mater Res. 2014;29:2934–41.10.1557/jmr.2014.334Search in Google Scholar
[85] Hoyos DA, Echavarría A, Saldarriaga C. Synthesis and structure of a porous zinc vanadate, Zn3(VO4)2·3H2O. J Mater Sci. 2011;36:5515–18.10.1023/A:1012418706071Search in Google Scholar
[86] Wang Y, Chang Z, Blamo BJ, Wu X, Liu S, Li W. Preparation of photocatalytic Zn3(VO4)2/ZnWO4 from waste V2O5–WO3/TiO2 SCR catalyst. Waste Biomass Valorization. 2017;8:2423–30.10.1007/s12649-016-9783-ySearch in Google Scholar
[87] Sha X, Ma W, Meng F, Wang R, Fuping T, Wei L. Adsorption of vanadium (V) from SCR catalyst leaching solution and application in Methyl Orange. Water Environ Res. 2016;88:2219–27.10.2175/106143016X14733681695762Search in Google Scholar PubMed
[88] Farcy B, Abou-Taouk A, Vervisch L, Domingo P, Perret N. Two approaches of chemistry downsizing for simulating selective non catalytic reduction DeNOx process. Fuel. 2014;118:291–99.10.1016/j.fuel.2013.10.070Search in Google Scholar
[89] Modliński N. Numerical simulation of SNCR (selective non-catalytic reduction) process in coal fired grate boiler. Energy. 2015;92:67–76.10.1016/j.energy.2015.03.124Search in Google Scholar
[90] Liang L, Hui S, Pan S, Shang T, Liu C, Wang D. Influence of mixing, oxygen and residence time on the SNCR process. Fuel. 2014;120:38–45.10.1016/j.fuel.2013.11.050Search in Google Scholar
[91] Hou N, Zhang Y, Meng M. Carbonate-based lean-burn NOx trap catalysts Pt−K2CO3/ZrO2 with large NOx storage capacity and high reduction efficiency. J Phys Chem C. 2013;117:4089–97.10.1021/jp3117598Search in Google Scholar
[92] Zhang Y, Meng M, Dai F, Ding T, You R. States and function of potassium carbonate species in the polytitanate nanobelt supported catalysts used for efficient NOx storage and reduction. J Phys Chem C. 2013;117:23691–700.10.1021/jp406950uSearch in Google Scholar
[93] Hansen LD, Fisher GL. Elemental distribution in coal fly ash particles. Environ Sci Technol. 1980;14:1111–7.7.10.1021/es60169a015Search in Google Scholar
[94] Kauffer N, Litchman D. Comparison of micron and submicron fly ash particles using scanning electron microscopy and x-ray elemental analysis. Environ Sci Technol. 1984;18:54–57.10.1021/es00125a012Search in Google Scholar
[95] Roussak O, Gesser HD. Applied chemistry, a textbook for engineers and technologists. New York, USA: Springer, 2013.10.1007/978-1-4614-4262-2Search in Google Scholar
[96] Geological Survey Professional Paper. U.S. Government Printing Office, 1949.Search in Google Scholar
[97] Uzarowicz Ł, Zagórski Z. Mineralogy and chemical composition of technogenic soils (Technosols) developed from fly ash and bottom ash from selected thermal power stations in Poland. Soil Science Annual. 2016;66:82–91.10.1515/ssa-2015-0023Search in Google Scholar
[98] Wee HL, Wua H, Zhanga D, French D. The effect of combustion conditions on mineral matter transformation and ash deposition in a utility boiler fired with a sub-bituminous coal. Proc Combustion Inst. 2005;30:2981–89.10.1016/j.proci.2004.08.059Search in Google Scholar
[99] Ghafoorit N, Bucholc J. Investigation of lignite-based bottom ash for structural concrete. J Mater Civ Eng. 1996;8:128–37.10.1061/(ASCE)0899-1561(1996)8:3(128)Search in Google Scholar
[100] Duan L Partitioning behaviour of trace elements with particle size distribution in fly ash under air and oxy-fuel combustion in 5th international meeting on oxy-fuel combustion research network, Wuhan, China, 2015. Available at: http://www.ieaghg.org/docs/General_Docs/5oxy%20presentations/Capacity%20Building%20Course/07%20-%20L.%20Duan%20(Southeast%20University).pdf. Accessed: 23 Aug 2017.Search in Google Scholar
[101] Borio RW, Levasseur AA. Overview of coal ash deposition in boilers. In 188th National Meeting of the American Chemical Society, Philadelphia, 1984:26–31.Search in Google Scholar
[102] Kamiński J. Technologies and costs of SO2-emissions reduction for the energy sector. Appl Energy. 2003;75:165–72.10.1016/S0306-2619(03)00029-1Search in Google Scholar
[103] Luttrell GH, Kohmuench JN, Yoon RH. An evaluation of coal preparation technologies for controlling trace element emissions. Fuel Process Technol. 2000;65–66:407–22.10.1016/S0378-3820(99)00107-1Search in Google Scholar
[104] Nygaard HG, Kiil S, Johnsson JE, Jensen JN, Hansen J, Fogh F, et al. Full-scale measurements of SO2 gas phase concentrations and slurry compositions in a wet flue gas desulphurisation spray absorber. Fuel. 2004;83:1151–64.10.1016/j.fuel.2003.12.007Search in Google Scholar
[105] Zhong Y, Gao X, Huo W, Luo ZY, Ni MJ, Cen KF. A model for performance optimization of wet flue gas desulfurization systems of power plants. Fuel Process Technol. 2008;89:1025–32.10.1016/j.fuproc.2008.04.004Search in Google Scholar
[106] Córdoba P. Status of Flue Gas Desulphurisation (FGD) systems from coal-fired power plants: overview of the physic-chemical control processes of wet limestone FGDs. Fuel. 2015;144:274–86.10.1016/j.fuel.2014.12.065Search in Google Scholar
[107] Kairies CL, Schroeder KT, Cardone CR. Mercury in gypsum produced from flue gas desulfurization. Fuel. 2006;85:2530–36.10.1016/j.fuel.2006.04.027Search in Google Scholar
[108] Srivastava RK, Hutson N, Martin B, Princiotta F, Staudt J. Control of mercury emissions from coal-fired electric utility boilers: an overview of the status of mercury control technologies. Environ Sci Technol. 2006;40:1385–93.10.1021/es062639uSearch in Google Scholar PubMed
[109] Zou R, Zeng X, Luo G, Qiu Y, Zhang B, Xu Y, et al. Mercury stability of byproducts from wet flue gas desulfurization devices. Fuel. 2016;186:215–21.10.1016/j.fuel.2016.08.023Search in Google Scholar
[110] Ochoa-González R, Díaz-Somoano M, Martínez-Tarazona MR. Control of Hg0 re-emission from gypsum slurries by means of additives in typical wet scrubber conditions. Fuel. 2013;105:112–18.10.1016/j.fuel.2012.05.044Search in Google Scholar
[111] Rallo M, Lopez-Anton MA, Perry R, Maroto-Valer MM. Mercury speciation in gypsums produced from flue gas desulfurization by temperature programmed decomposition. Fuel. 2010;89:2157–59.10.1016/j.fuel.2010.03.037Search in Google Scholar
[112] Clarke L. The fate of trace elements during combustion and gasification: an overview. Fuel. 1993;72:731–36.10.1016/0016-2361(93)90072-ASearch in Google Scholar
[113] Cheng C, Hack P, Chu P, Chang YN, Lin TY, Ko CS, et al. Partitioning of mercury, arsenic, selenium, boron, and chloride in a full-scale coal combustion process equipped with selective catalytic reduction, electrostatic precipitation, and flue gas desulfurization systems. Energy Fuels. 2009;23:4805–16.10.1021/ef900293uSearch in Google Scholar
[114] Álvarez-Ayuso E, Querol X, Tomás A. Environmental impact of coal combustion desulphurisation plant: abatement capacity of desulphurisation process and environmental characterization of combustion by-products. Chemosphere. 2006;665:2009–17.10.1016/j.chemosphere.2006.06.070Search in Google Scholar
[115] Zheng Y, Kiil S, Johnsson JE, Zhong Q. Use of spray dry absorption product in wet flue gas desulphurization plants: pilot-scale experiments. Fuel. 2002;81:1899–905.10.1016/S0016-2361(02)00133-3Search in Google Scholar
[116] 2015 Coal Combustion Product (CCP). Production and use survey report, American coal ash association. Available at: https://www.acaa-usa.org/Portals/9/Files/PDFs/2015-Survey_Results_Table.pdf. Accessed: 23 Aug 2017.Search in Google Scholar
[117] ECOBA 2006 CCP Production & Use Survey (Europe (EU 15). ECOBA – European Coal Combustion Products Association. Available at: https://www.acaa-usa.org/Portals/9/Files/PDFs/ECOBA_Stat_2006_EU15.pdf. Accessed: 23 Aug 2017.Search in Google Scholar
[118] Natural Resources Canada. Production and use of Coal Combustion Products (CCPs), 2008–2010 and 2009–2011, March, 2013Search in Google Scholar
[119] ASTM C618-17. Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. West Conshohocken, PA: ASTM International, 2017.Search in Google Scholar
[120] Lopez-Flores F. Flyash and effect of partial cement replacement by flyash. Joint Highway Research Project JHRP-82-11, School of Civil Engineering, Purdue University, 13 July 1982.10.5703/1288284314049Search in Google Scholar
[121] Cheng-Yong H, Yun-Ming L, Abdullah MM, Hussin K. Thermal resistance variations of fly ash geopolymers: foaming responses. Scientific Reports 7, Article number: 45355, 2017.10.1038/srep45355Search in Google Scholar PubMed PubMed Central
[122] Dutta BK, Khanra S, Mallick D. Leaching of elements from coal fly ash: assessment of its potential for use in filling abandoned coal mines. Fuel. 2009;88:1314–23.10.1016/j.fuel.2009.01.005Search in Google Scholar
[123] Gao YM, Shim HS, Hurt RH, Suuberg EM, Yang MY. Effects of carbon on air entrainment in fly ash concrete: the role of soot and carbon black. Energy Fuels. 1997;11:457–62.10.1021/ef960113xSearch in Google Scholar
[124] Hower J, Robertson J. Chemistry and petrology of fly ash derived from the co-combustion of western United States coal and tire-derived fuel. Fuel Process Technol. 2004;85:359–77.10.1016/j.fuproc.2003.05.003Search in Google Scholar
[125] Barbosa R, Lapa N, Boavida D, Lopes H, Gulyurtlu I, Mendes B. Co-combustion of coal and sewage sludge: chemical and ecotoxicological properties of ash. J Hazard Mater. 2009;170:902–09.10.1016/j.jhazmat.2009.05.053Search in Google Scholar PubMed
[126] Jukić M, Ćurković L, Šabarić J, Kerolli-Mustafa M. Fractionation of heavy metals in fly ash from wood biomass using the BCR sequential extraction procedure. Bull Environ Contam Toxicol. 2017;99:524–29.10.1007/s00128-017-2160-0Search in Google Scholar PubMed
[127] EN 450-1:2012, Fly ash for concrete. Definition, specifications and conformity criteria.Search in Google Scholar
[128] Vom Berg W, Feuerborn HJ. Present situation and perspective of CCP management in Europe. Lexington, Kentucky, USA: World of Coal Ash (WOCA), 2005.Search in Google Scholar
[129] Ramme BW, Tharaniyil MP. We energies Coal combustion products utilization handbook, 3rd ed. Wisconsin, USA : We Energies, 2013.Search in Google Scholar
[130] Vardaka G, Thomaidis K, Leptokaridis C, Tsimas S. Use of steel slag as coarse aggregate for the production of pervious concrete. J Sustain Dev Energy Water Environ Syst. 2014;2:30–40.10.13044/j.sdewes.2014.02.0003Search in Google Scholar
[131] 2005 Coal Combustion Product (CCP). Production and use survey report, American coal ash association. Available at: https://www.acaa-usa.org/Portals/9/Files/PDFs/2005-Survey_Results_Table.pdf. Accessed: 25 Aug 2017.Search in Google Scholar
[132] Page AL, Elseewi A, Straughan IR. Physical and chemical properties of flyash from coal-fired power plants with reference to environmental impacts. In: Gunther F, Gunther J, editors. Residue reviews. New York: Springer, 1979. p. 83–120.10.1007/978-1-4612-6185-8_2Search in Google Scholar
[133] Ghio AJ, Silbajoris R, Carson JL, Samet JM. Biological effects of oil fly ash. Environ Health Perspect. 2002;110(Suppl 1):89.10.1289/ehp.02110s1189Search in Google Scholar
[134] Vandenbusch MB, Sell NJ. Fly ash as a sorbent for the removal of biologically resistant organic matter. Res Conser Recycl. 1992;6:95–116.10.1016/0921-3449(92)90037-3Search in Google Scholar
[135] Sanna A, Maroto-Valer MM. Potassium-based sorbents from fly ash for high-temperature CO2 capture. Environ Sci Pollut Res Int. 2016;23:22242–52.10.1007/s11356-016-6378-xSearch in Google Scholar PubMed
[136] González A, Moreno N, Navia R, Querol X. Development of a non-conventional sorbent from fly ash and its potential use in acid wastewater neutralization and heavy metal removal. Chem Eng J. 2011;166:896–905.10.1016/j.cej.2010.11.064Search in Google Scholar
[137] Harja M, Buema G, Sutiman DM, Cretescu I. Removal of heavy metal ions from aqueous solutions using low-cost sorbents obtained from ash. Chem Pap. 2013;67:497–508.10.2478/s11696-012-0303-7Search in Google Scholar
[138] Remenárová L, Pipíška M, Florková E, Hornik M, Rozloznik M, Augustin J. Zeolites from coal fly ash as efficient sorbents for cadmium ions. Clean Techn Environ Policy. 2014;16:1551–64.10.1007/s10098-014-0728-5Search in Google Scholar
[139] Wang SB. Application of solid ash based catalysts in heterogeneous catalysis. Environ Sci Technol. 2008;42:7055–63.10.1021/es801312mSearch in Google Scholar PubMed
[140] Xuan X, Yue C, Li S, Yao Q. Selective catalytic reduction of NO by ammonia with fly ash catalyst. Fuel. 2003;82:575–79.10.1016/S0016-2361(02)00321-6Search in Google Scholar
[141] Saracco G, Specchia S, Specchia V. Catalytically modified fly-ash filters for NOx reduction with NH3. Chem Engin Sci. 1996;51:5289–97.10.1016/S0009-2509(96)00373-9Search in Google Scholar
[142] Li L, Wang S, Zhu Z, Yao X, Yan Z. Catalytic decomposition of ammonia over fly ash supported Ru catalysts. Fuel Process Technol. 2008;89:1106–12.10.1016/j.fuproc.2008.05.002Search in Google Scholar
[143] Chen WJ, Sheu FR, Savage RL. Catalytic activity of coal ash on steammethane reforming and water-gas shift reactions. Fuel Process Technol. 1987;16:279–88.10.1016/0378-3820(87)90025-7Search in Google Scholar
[144] Khatri C, Mishra MK, Rani A. Synthesis and characterization of fly ash supported sulfated zirconia catalyst for benzylation reactions. Fuel Process Technol. 2010;91:1288–95.10.1016/j.fuproc.2010.04.011Search in Google Scholar
[145] Saputra E, Muhammad S, Sun HQ, Anga HM, Tadéa MO, Wang SB. Red mud and fly ash supported Co catalysts for phenol oxidation. Catal Today. 2012;190:68–72.10.1016/j.cattod.2011.10.025Search in Google Scholar
[146] Zhang AL, Wang NN, Zhou JT, Jiang P, Liu GF. Heterogeneous Fenton-like catalytic removal of p-nitrophenol in water using acid-activated fly ash. J Hazard Mater. 2012;201–202:68–73.10.1016/j.jhazmat.2011.11.033Search in Google Scholar PubMed
[147] Babajide O, Petrik L, Musyoka N, Amigun B, Ameer F. Use of coal fly ash as a catalyst in the production of biodiesel. Petroleum Coal. 2010;52:261–72.Search in Google Scholar
[148] Manique MC, Lacerda LV, Alves AK, Bergmann CP. Biodiesel production using coal fly ash-derived sodalite as a heterogeneous catalyst. Fuel. 2017;190:268–73.10.1016/j.fuel.2016.11.016Search in Google Scholar
[149] Chakraborty R, Bepari S, Banerjee A. Transesterification of soybean oil catalyzed by fly ash and egg shell derived solid catalysts. Chem Eng J. 2010;165:798–805.10.1016/j.cej.2010.10.019Search in Google Scholar
[150] Jain D, Khatri C, Rani A. Fly ash supported calcium oxide as recyclable solid base catalyst for Knoevenagel condensation reaction. Fuel Process Technol. 2010;91:1015–21.10.1016/j.fuproc.2010.02.021Search in Google Scholar
[151] Sutarno S, Arryanto Y. Synthesis of faujasite from fly ash and its applications for hydrocracking of petroleum distillates. Bull Chem React Eng Catal. 2007;2:45–51.10.9767/bcrec.2.2-3.9.45-51Search in Google Scholar
[152] Ruane R, Milligan D, Young R, Chu R, Olem H. Aquatic effects of wet ash disposal and wet limestone scrubber systems. Water Sci Technol. 1983;15:149–53.10.2166/wst.1983.0082Search in Google Scholar
[153] Keyser TR, Natusch DF, Evans CA, Linton RW. Characterizing the surface of environmental particles. Environ Sci Technol. 1978;12:768–73.10.1021/es60143a013Search in Google Scholar
[154] Eisenberg SH, Tittlebaum ME, Eaton HC, Soroezak MM. Chemical characteristics of selected fly ash leachates. J Environ Sci Health. 1986;21:383–402.Search in Google Scholar
[155] Markowski GR, Filby R. Trace element concentration as a function of particle size in fly ash from a pulverised coal utility boiler. Environ Sci Technol. 1985;19:796–04.10.1021/es00139a005Search in Google Scholar
[156] Izquierdo M, Querol X. Leaching behaviour of elements from coal combustion fly ash: an overview. Int J Coal Geol. 2012;94:54–66.10.1016/j.coal.2011.10.006Search in Google Scholar
[157] Querol X, Fernhndez-Turiel JL, Lbpez-Soler A. Trace elements in coal and their behaviour during combustion in a large power station. Fuel. 1995;74:331–43.10.1016/0016-2361(95)93464-OSearch in Google Scholar
[158] Chadwick MJ, Highton NH, Lindman N. Environmental impacts of coal mining and utilisation. Oxford: Pergamon Press, 1987:171–217.Search in Google Scholar
[159] Iyer R. The surface chemistry of leaching coal fly ash. J Hazard Mater. 2002;93:321–29.10.1016/S0304-3894(02)00049-3Search in Google Scholar PubMed
[160] Fischer GL, Chang DP, Brummer M. Fly ash collected from electrostatic precipitators, microcrystalline structures and the mystery of spheres. Science. 1976;192:553–55.10.1126/science.192.4239.553Search in Google Scholar PubMed
[161] Tang Q, Liu G, Zhou C, Sun R. Distribution of trace elements in feed coal and combustion residues from two coal-fired power plants at Huainan, Anhui, China. Fuel. 2013;107:315–22.10.1016/j.fuel.2013.01.009Search in Google Scholar
[162] Moreno N, Querol X, Andrés JM, Stanton K, Towler M, Nugteren H, et al. Physico-chemical characteristics of European pulverized coal combustion fly ashes. Fuel. 2005;84:1351–63.10.1016/j.fuel.2004.06.038Search in Google Scholar
[163] Seidel A, Zimmels Y, Armon R. Mechanism of bioleaching of coal fly ash by Thiobacillus thiooxidans. Chem Eng J. 2001;83:123–30.10.1016/S1385-8947(00)00256-4Search in Google Scholar
[164] Bankar A, Winey M, Prakash D, Kumar AR, Gosavi S, Kapadnis B, et al. Bioleaching of fly ash by the tropical marine yeast, Yarrowia lipolytica NCIM 3589. Appl Biochem Biotechnol. 2012;168:2205–17.10.1007/s12010-012-9930-2Search in Google Scholar PubMed
[165] Bosshard PP, Bachofen R, Brandl H. Metal leaching of fly ash from municipal waste incineration by Aspergillus niger. Environ Sci Technol. 1996;30:3066–70.10.1021/es960151vSearch in Google Scholar
[166] Ishigaki T, Nakanishi A, Tateda M, Ike M, Fujita M. Bioleaching of metal from municipal waste incineration fly ash using a mixed culture of sulfur-oxidizing and iron-oxidizing bacteria. Chemosphere. 2005;60:1087–94.10.1016/j.chemosphere.2004.12.060Search in Google Scholar PubMed
[167] Yang J, Wang Q, Wang Q, Wu T. Comparisons of onestep and two-step bioleaching for heavy metals removed from municipal solid waste incineration fly ash. Environ Eng Sci. 2008;25:783–89.10.1089/ees.2007.0211Search in Google Scholar
[168] Xu TJ, Ting YP. Fungal bioleaching of incineration fly ash: metal extraction and modeling growth kinetics. Enzyme Microb Technol. 2009;44:323–28.10.1016/j.enzmictec.2009.01.006Search in Google Scholar
[169] Li LS, Wu YS, Liu YY, Zhai YC. Extraction of alumina from coal fly ash with sulfuric acid leaching method. Chin J Process Eng. 2011;11:254–58.Search in Google Scholar
[170] Wu C-Y, Yu HF, Zhang HF. Extraction of aluminum by pressure acid-leaching method from coal fly ash. Trans Nonferrous Met Soc China. 2012;22:2282–88.10.1016/S1003-6326(11)61461-1Search in Google Scholar
[171] Katsuura H, Inoue T, Hiraoka M, Sakai S. Full-scale plant study on fly ash treatment by the acid extraction process. Waste Manag. 1996;16:491–99.10.1016/S0956-053X(96)00091-8Search in Google Scholar
[172] Huang K, Inoue K, Harada H, Kawakita H, Keisuke O. Leaching behavior of heavy metals with hydrochloric acid from fly ash generated in municipal waste incineration plants. Trans Nonferrous Met Soc China. 2011;21:1422–27.10.1016/S1003-6326(11)60876-5Search in Google Scholar
[173] Huang K, Inoue K, Harada H, Kawakita H, Ohto K. Leaching of heavy metals by citric acid from fly ash generated in municipal waste incineration plants. J Mater Cycles Waste Manag. 2011;13:118–26.10.1007/s10163-011-0001-5Search in Google Scholar
[174] Fedje KK, Ekberg C, Skarnemark G, Steenari BM. Removal of hazardous metals from MSW fly ash – an evaluation of ash leaching methods. J Hazard Mater. 2010;173:310–17.10.1016/j.jhazmat.2009.08.094Search in Google Scholar PubMed
[175] Wu HY, Ting YP. Metal extraction from municipal solid waste (MSW) incinerator fly ash – chemical leaching and fungal bioleaching. Enzyme Microb Technol. 2006;38:839–47.10.1016/j.enzmictec.2005.08.012Search in Google Scholar
[176] Nagib S, Inoue K. Recovery of lead and zinc from fly ash generated from municipal incineration plants by means of acid and/or alkaline leaching. Hydrometallurgy. 2000;56:269–92.10.1016/S0304-386X(00)00073-6Search in Google Scholar
[177] Yang GC, Tsai CM. A study on heavy metal extractability and subsequent recovery by electrolysis for a municipal incinerator fly ash. J Hazard Mater. 1998;58:103–20.10.1016/S0304-3894(97)00124-6Search in Google Scholar
[178] Kazonich G, Kim AG, Dahlberg MD, editors. Comparison of leaching results for three high mercury fly ash samples. In:Proceedings of the Air Quality IV: Mercury, Trace Elements, and Particulate Matter Conference, 2003.Search in Google Scholar
[179] Mizutani S, Yoshida T, Sakai SI, Takatsuki H. Release of metals from MSW I fly ash and availability in alkali condition. Waste Manag. 1996;16:537–44.10.1016/S0956-053X(96)00095-5Search in Google Scholar
[180] Wang J, Ban H, Teng X, Wang H, Ladwig K. Impacts of pH and ammonia on the leaching of Cu(II) and Cd(II) from coal fly ash. Chemosphere. 2006;64:1892–98.10.1016/j.chemosphere.2006.01.041Search in Google Scholar PubMed
[181] Wang J, Wang T, Mallhi H, Liu Y, Ban H, Ladwig K. The role of ammonia on mercury leaching from coal fly ash. Chemosphere. 2007;69:1586–92.10.1016/j.chemosphere.2007.05.053Search in Google Scholar PubMed
[182] Gustin MS, Ladwig K. An assessment of the significance of mercury release from coal fly ash. J Air Waste Manage Assoc. 2004;54:320–30.10.1080/10473289.2004.10470900Search in Google Scholar
[183] Xu YH, Nakajima T, Ohki A. Leaching of arsenic from coal fly ashes 1. Leaching behavior of arsenic and mechanism study. Toxicol Environ Chem. 2001;81:55–68.10.1080/02772240109359019Search in Google Scholar
[184] Tsai SL, Tsai MS. A study of the extraction of vanadium and nickel in oil-fired fly ash. Resour Conserv Recycl. 1998;22:163–76.10.1016/S0921-3449(98)00007-XSearch in Google Scholar
[185] Pangayao D, Gallardo S, editors. Leaching of chromium from coal ash using citric acid, oxalic acid and gluconic acid by batch leaching procedure. In: IEEE 2014 International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management (HNICEM) 93. Torma AE, 2–14.10.1109/HNICEM.2014.7016250Search in Google Scholar
© 2018 Walter de Gruyter GmbH, Berlin/Boston
Articles in the same Issue
- CO2-based hydrogen storage – Hydrogen generation from formaldehyde/water
- Selenium and tellurium nanomaterials
- Industrial uses and applications of ionic liquids
- Hydrogenation of carbonyl compounds of relevance to hydrogen storage in alcohols
- Electronic wastes
- Energy industry
Articles in the same Issue
- CO2-based hydrogen storage – Hydrogen generation from formaldehyde/water
- Selenium and tellurium nanomaterials
- Industrial uses and applications of ionic liquids
- Hydrogenation of carbonyl compounds of relevance to hydrogen storage in alcohols
- Electronic wastes
- Energy industry