Article Publicly Available

Frontmatter

Published/Copyright: September 1, 2017
Download Article (PDF)
Become an author with De Gruyter Brill
Submit Manuscript Author Information
Journal of Polymer Engineering
From the journal Journal of Polymer Engineering Volume 37 Issue 7

Published Online: 2017-9-1
Published in Print: 2017-8-28

©2017 Walter de Gruyter GmbH, Berlin/Boston

Articles in the same Issue

  1. Frontmatter
  2. Original articles
  3. Stem cell culture on polyvinyl alcohol hydrogels having different elasticity and immobilized with ECM-derived oligopeptides
  4. Graphene oxide as a compatibilizer for polyvinyl chloride/rice straw composites
  5. Effect of hybrid-SiO2 particles on characterization of EPDM and silicone rubber composites for outdoor high-voltage insulations
  6. Properties of POB reinforced PTFE-based friction material for ultrasonic motors
  7. Fabrication, characterization, and application of polyester/wood flour composites
  8. Anisotropic mechanical properties of fused deposition modeled parts fabricated by using acrylonitrile butadiene styrene polymer
  9. Development of partial miscibility in polycarbonate/polypropylene blends via annealing
  10. Study on low temperature toughness and crystallization behavior of polypropylene random copolymer
  11. Steady flow and heat transfer analysis of MHD flow of Phan-Thien-Tanner fluid in double-layer optical fiber coating analysis with slip conditions
https://doi.org/10.1515/polyeng-2017-frontmatter7

Articles in the same Issue

  1. Frontmatter
  2. Original articles
  3. Stem cell culture on polyvinyl alcohol hydrogels having different elasticity and immobilized with ECM-derived oligopeptides
  4. Graphene oxide as a compatibilizer for polyvinyl chloride/rice straw composites
  5. Effect of hybrid-SiO2 particles on characterization of EPDM and silicone rubber composites for outdoor high-voltage insulations
  6. Properties of POB reinforced PTFE-based friction material for ultrasonic motors
  7. Fabrication, characterization, and application of polyester/wood flour composites
  8. Anisotropic mechanical properties of fused deposition modeled parts fabricated by using acrylonitrile butadiene styrene polymer
  9. Development of partial miscibility in polycarbonate/polypropylene blends via annealing
  10. Study on low temperature toughness and crystallization behavior of polypropylene random copolymer
  11. Steady flow and heat transfer analysis of MHD flow of Phan-Thien-Tanner fluid in double-layer optical fiber coating analysis with slip conditions
Downloaded on 13.4.2026 from https://www.degruyterbrill.com/document/doi/10.1515/polyeng-2017-frontmatter7/html
Scroll to top button