Performance study of polyurethane/silicon carbide composite repairing asphalt pavements
-
,
Abstract
Polyurethane (PU)/silicon carbide composites, which can rapidly repair cracked asphalt pavements, were synthesized by addition polymerization. The materials were characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and mechanical performance tests. Liquid diphenylmethane diisocyanate (L-MDI) type prepolymer/toluene diisocyanate (TDI-80) type prepolymer weight ratio, curing agent and silane coupling agent 3-aminopropyltriethoxysilane (KH550) were investigated mainly in this paper. In addition, silicon carbide was treated with KH550. Results show that the crystal structure of silicon carbide had subtle changes and the correct amount of KH550 can enhance the mechanical performance and thermal endurance.
Acknowledgments
We would like to express our great thanks to Professor Zhenhai Liang in Taiyuan University of Technology, for his suggestions on how to improve this paper.
References
[1] Elvik R, Greibe P. Accid. Anal. Prev. 2005, 37, 515–522.Search in Google Scholar
[2] Abdulrahman A, Raja RH, Rajeh A, Abdulaziz A. Constr. Build. Mater. 2012, 28, 670–679.Search in Google Scholar
[3] Camille A, Pauls D. Constr. Build. Mater. 2007, 21, 157–163.Search in Google Scholar
[4] Valcuende M, Parra C, Marco E, Garrido A, Martínez E. Constr. Build. Mater. 2012, 28, 122–128.Search in Google Scholar
[5] Lee HJ, Lee JH, Hee MP. Constr. Build. Mater. 2007, 21, 1079–1087.Search in Google Scholar
[6] Behzadnasab M, Mirabedini SM, Kabiri K, Jamali S. Corros. Sci. 2011, 53, 89–98.Search in Google Scholar
[7] Samadzadeh M, Hatami BS, Peikari M, Ashrafi A, Kasiriha M. Prog. Org. Coat. 2011, 70, 383–387.Search in Google Scholar
[8] Wang YJ, Xu GY, Yu HJ, Hu C, Yan XX. Appl. Surf. Sci. 2011, 257, 4743–4748.Search in Google Scholar
[9] Wang YP, Ye JF, Liu YH, Qiang XH, Feng LB. Constr. Build. Mater. 2013, 41, 580–585.Search in Google Scholar
[10] Guo ZH, Park S, Wei SY, Pereira T, Moldovan M, Karki AB, Young DP, Hahn HT. Nanotechnology, 2007, 18, 335704.10.1088/0957-4484/18/33/335704Search in Google Scholar
[11] Zhang X, Alloul O, He QL, Zhu JH, Verde MJ, Li YT, Wei SY, Guo ZH. Polymer 2013, 54, 359.10.1016/j.polymer.2013.04.062Search in Google Scholar
[12] Zhu JH, Wei SY, Lee IY, Park S, Willis J, Haldolaarachchige N, Young DP, Luo ZP, Guo ZH. RSC Adv. 2012, 2, 1136–1143.Search in Google Scholar
[13] Zhang X, Alloul O, Zhu JH, He QL, Luo ZP, Colorado HA, Haldolaarachchige N, Young DP, Shen TD, Wei SY, Guo ZH. RSC Adv. 2013, 3, 9453–9464.Search in Google Scholar
[14] Wei HG, Ding DW, Wei SY, Guo ZH. J. Mater. Chem. A 2013, 1, 10805–10813.10.1039/c3ta11966aSearch in Google Scholar
[15] Guo Z, Lee S-E, Kim H, Park S, Hahn HT, Karki AB, Young DP. Acta Mater. 2009, 57, 267–277.Search in Google Scholar
[16] Guo ZH, Kim TY, Lei K, Pereira T, Sugar JG, Hahn HT. Compos. Sci. Technol. 2008, 68, 164–170.Search in Google Scholar
[17] Zhu JH, Wei SY, Haldolaarachchige N, Young DP, Guo ZH. J. Phys. Chem. C 2011, 115, 15304–15310.10.1021/jp2052536Search in Google Scholar
[18] Zhu JH, Wei SY, Atarsingh Yadav, Guo ZH. Polymer 2010, 51, 2643–2651.10.1016/j.polymer.2010.04.019Search in Google Scholar
[19] Guo ZH, Pereira T, Choi O, Wang Y, Hahn HT. J. Mater. Chem. 2006, 16, 2800–2808.Search in Google Scholar
[20] Rogulska M, Kultys A, Podkoscielny W. Eur. Polym. J. 2007, 43, 1402–1414.Search in Google Scholar
[21] Wingborg N. Polym. Test. 2002, 21, 283–287.Search in Google Scholar
[22] Yan XX, Xu GY. Prog. Org. Coat. 2012, 73, 232–238.Search in Google Scholar
[23] Chen H, Zeng D, Xiao X, Zheng M, Ke C, Yanjun Li. Mater. Sci. Eng.: A 2011, 528, 1656–1661.10.1016/j.msea.2010.10.087Search in Google Scholar
[24] Jenneskens LW, Schuurs HEC, Simons DJ. Composites 1994, 25, 504–511.10.1016/0010-4361(94)90177-5Search in Google Scholar
[25] Sae-oui P, Sirisinha C, Thepsuwan U, Hatthapanita K. Eur. Polym. J. 2006, 42, 479–486.Search in Google Scholar
[26] Wei BG, Chang Q, Bao CX, Dai L, Zhang GZ, Wu FP. Colloids Surf., A 2013, 434, 276–280.10.1016/j.colsurfa.2013.05.069Search in Google Scholar
[27] Zhou TL, Wang X, Liu XH. Polymer 2008, 49, 4666–4672.10.1016/j.polymer.2008.08.023Search in Google Scholar
[28] Nypuist RA, Kagel RO. Academic 1971, 1–94.10.1016/B978-0-12-523450-4.50005-5Search in Google Scholar
[29] Wang L, Lu A, Wang C, Zheng X, Zhao D, Liu R. J. Colloid Interface Sci. 2006, 259, 436–439.Search in Google Scholar
[30] Kim R, Qin WP, Wei GD, Wang GF, Wang LL, Zhang DS, Zheng KZ, Liu N. Mater. Chem. Phys. 2010, 119, 309–314.Search in Google Scholar
[31] Navale ST, Bandgar DK, Nalage SR, Khuspe GD, Chougule MA, Kolekar YD, Sen S, Patil VB. Ceram. Int. 2013, 39, 6453–6460.Search in Google Scholar
[32] Kim MT. Thin Solid Films 1997, 311, 157–163.10.1016/S0040-6090(97)00683-4Search in Google Scholar
[33] Adams AC. Solid State Technol. 1983, 26, 135.Search in Google Scholar
[34] Boyd IW, Wilson JIB. J. Appl. Phys. 1982, 53, 416.Search in Google Scholar
[35] Lucovsky G, Mantini MJ, Srivastava JK. J. Vac. Sci. Technol., B: Microelectron. Nanometer Struct. 1987, 5, 530.Search in Google Scholar
[36] Gao XY, Zhu YC, Zhao X, Wang ZC, An DM, Ma YJ, Guan S, Du YY, Zhou B. Appl. Surf. Sci. 2011, 257, 4719–4724.Search in Google Scholar
[37] Jellinek HHG, Takada K. J. Polym. Sci.: Polym. Chem. 1977, 15, 2269.Search in Google Scholar
[38] Thompson DG, Osborn JC, Kober EM, Schoonover JR. Polym. Degrad. Stabil. 2006, 91, 2260.Search in Google Scholar
[39] Yen MS, Tsai HC, Hong PD. J. Appl. Polym. Sci. 2007, 105, 1391–1399.Search in Google Scholar
[40] Cakic SM, Ristic IS, Cincovic MM, Spırkova M. Int. J. Adhes. Adhes. 2013, 41, 132–139.Search in Google Scholar
©2014 by Walter de Gruyter Berlin/Boston
Articles in the same Issue
- Frontmatter
- Review
- Organic semiconductors for device applications: current trends and future prospects
- Original articles
- An easy approach to fabricating HgS/chitosan nanocomposite films and their ability to sense triethylamine
- Changes in morphology and optical properties of polyvinyl alcohol foils induced by Congo red dye concentration and stretching degree
- Parameters characterizing the kinetics of the non-isothermal crystallization of polyamide 5,6 determined by differential scanning calorimetry
- Fabrication and modification of mixed matrix polyvinylchloride based heterogeneous cation exchange membrane by Ag nanolayer/plasma treatment: investigation of nanolayer deposition rate effect
- Performance study of polyurethane/silicon carbide composite repairing asphalt pavements
- Effect of different amounts of modified talc on the mechanical, thermal, and crystallization properties of poly(butylene succinate)
Articles in the same Issue
- Frontmatter
- Review
- Organic semiconductors for device applications: current trends and future prospects
- Original articles
- An easy approach to fabricating HgS/chitosan nanocomposite films and their ability to sense triethylamine
- Changes in morphology and optical properties of polyvinyl alcohol foils induced by Congo red dye concentration and stretching degree
- Parameters characterizing the kinetics of the non-isothermal crystallization of polyamide 5,6 determined by differential scanning calorimetry
- Fabrication and modification of mixed matrix polyvinylchloride based heterogeneous cation exchange membrane by Ag nanolayer/plasma treatment: investigation of nanolayer deposition rate effect
- Performance study of polyurethane/silicon carbide composite repairing asphalt pavements
- Effect of different amounts of modified talc on the mechanical, thermal, and crystallization properties of poly(butylene succinate)
