Article
Licensed
Unlicensed
Requires Authentication
Compatibilizing Effect of Poly(Styrene-co-Glycidyl Methacrylate) in MPPO/PBT Blend
-
Tae Oan Ahn
Published/Copyright:
October 11, 2016
Abstract
The compatibilizing effect of three kinds of poly(styrene-co-glycidyl methacrylate) (SGMA) in a modified poly(2,6-dimethyl-1,4-phenylene oxide) (MPPO)/poly(butylene terephthalate) (PBT) blend was studied based on the morphology observed by scanning electron microscopy, dynamic mechanical properties, rheological properties, and mechanical properties. When the content of SGMA in the blend was fixed at 3 phr, the compatibilizing effect of SGMA increased as the GMA content in SGMA was increased. When the content of the reactive GMA monomeric unit in the blend was fixed at 0.37 phr, SGMA containing 4 mol% of GMA unit was most effective for compatibilization among three kinds of SGMAs.
Keywords: in situ compatibilizer; poly(styrene-co-glycidyl methacrylate); modified PPO; PBT; morphology; dynamic mechanical properties; rheological properties; mechanical properties
Published Online: 2016-10-11
Published in Print: 1998-3-1
© 2016 by Walter de Gruyter Berlin/Boston
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Titelei
- Preface
- Contents
- A Stochastic Dynamics Simulation of Viscoelastic Properties of Polymer Blends: Intermolecular Interaction Effects
- Structure-Property Relationships of Poly(Butylene Terephthalate)/Polyolefin Blends
- Novel Silicon-Containing NLO Polyesters for Electro-Optic Applications
- Effect of Surface Area on the Interfacial Adhesion of UHMWPE fibers
- Relationship Between Fatigue Behavior and Nonlinear Dynamic Viscoelasticity for High-Density Polyethylenes with Different Aggregation States
- Friction and Wear of Rubber Compounds Containing Powdered Polynorbornene Vulcanizate
- Compatibilizing Effect of Poly(Styrene-co-Glycidyl Methacrylate) in MPPO/PBT Blend
- Properties of Flame-Retarding Blends of Polycarbonate and Poly(Acrylonitrile-butadiene-Styrene)
- Pervaporation Performance of β-Chitosan Membrane for Water/Alcohol Mixtures
- Melt Blends of SAN with Acrylonitrile-Styrene-Acrylic Ester Copolymer
Keywords for this article
in situ compatibilizer;
poly(styrene-co-glycidyl methacrylate);
modified PPO;
PBT;
morphology;
dynamic mechanical properties;
rheological properties;
mechanical properties
Articles in the same Issue
- Titelei
- Preface
- Contents
- A Stochastic Dynamics Simulation of Viscoelastic Properties of Polymer Blends: Intermolecular Interaction Effects
- Structure-Property Relationships of Poly(Butylene Terephthalate)/Polyolefin Blends
- Novel Silicon-Containing NLO Polyesters for Electro-Optic Applications
- Effect of Surface Area on the Interfacial Adhesion of UHMWPE fibers
- Relationship Between Fatigue Behavior and Nonlinear Dynamic Viscoelasticity for High-Density Polyethylenes with Different Aggregation States
- Friction and Wear of Rubber Compounds Containing Powdered Polynorbornene Vulcanizate
- Compatibilizing Effect of Poly(Styrene-co-Glycidyl Methacrylate) in MPPO/PBT Blend
- Properties of Flame-Retarding Blends of Polycarbonate and Poly(Acrylonitrile-butadiene-Styrene)
- Pervaporation Performance of β-Chitosan Membrane for Water/Alcohol Mixtures
- Melt Blends of SAN with Acrylonitrile-Styrene-Acrylic Ester Copolymer
