Rigid Foam Extrusion of Polyvinylchloride – Effects of Blowing Agent and Plasticizer

Kwang Ung Kim; Tae Suk Park; Byoung Chul Kim

doi:10.1515/polyeng-1986-0102

Home Rigid Foam Extrusion of Polyvinylchloride – Effects of Blowing Agent and Plasticizer

Article Publicly Available

Rigid Foam Extrusion of Polyvinylchloride – Effects of Blowing Agent and Plasticizer

Kwang Ung Kim , Tae Suk Park and Byoung Chul Kim

Published/Copyright: October 11, 2016

Download Article (PDF)

Published by

Become an author with De Gruyter Brill

Submit Manuscript Author Information

From the journal Journal of Polymer Engineering Volume 7 Issue 1

MLA
APA
Harvard
Chicago
Vancouver

MLA
APA
Harvard
Chicago
Vancouver

Kim, Kwang Ung, Park, Tae Suk and Kim, Byoung Chul. "Rigid Foam Extrusion of Polyvinylchloride – Effects of Blowing Agent and Plasticizer" Journal of Polymer Engineering, vol. 7, no. 1, 1986, pp. 1-12. https://doi.org/10.1515/polyeng-1986-0102

Kim, K., Park, T. & Kim, B. (1986). Rigid Foam Extrusion of Polyvinylchloride – Effects of Blowing Agent and Plasticizer. Journal of Polymer Engineering, 7(1), 1-12. https://doi.org/10.1515/polyeng-1986-0102

Kim, K., Park, T. and Kim, B. (1986) Rigid Foam Extrusion of Polyvinylchloride – Effects of Blowing Agent and Plasticizer. Journal of Polymer Engineering, Vol. 7 (Issue 1), pp. 1-12. https://doi.org/10.1515/polyeng-1986-0102

Kim, Kwang Ung, Park, Tae Suk and Kim, Byoung Chul. "Rigid Foam Extrusion of Polyvinylchloride – Effects of Blowing Agent and Plasticizer" Journal of Polymer Engineering 7, no. 1 (1986): 1-12. https://doi.org/10.1515/polyeng-1986-0102

Kim K, Park T, Kim B. Rigid Foam Extrusion of Polyvinylchloride – Effects of Blowing Agent and Plasticizer. Journal of Polymer Engineering. 1986;7(1): 1-12. https://doi.org/10.1515/polyeng-1986-0102

Copy

Copied to clipboard

BibTeX EndNote RIS

Published Online: 2016-10-11

Published in Print: 1986-1-1

Articles in the same Issue

Titelei
Contents
Rigid Foam Extrusion of Polyvinylchloride – Effects of Blowing Agent and Plasticizer
Plastics Engineering at the University of Lowell: The Legacy of Russell Ehlers
Dynamic Simulation and Graphics for the Injection Molding of Three-Dimensional Thin Parts
Pressure Effects on Rheological Behavior of Melt Polymers – A Discussion in Relation to Polymer Processing
Polymer Processing Hall of Fame Established at the University of Akron Polymer Engineering Center

Search journal Search the content of this journal

https://doi.org/10.1515/polyeng-1986-0102

Articles in the same Issue

Titelei
Contents
Rigid Foam Extrusion of Polyvinylchloride – Effects of Blowing Agent and Plasticizer
Plastics Engineering at the University of Lowell: The Legacy of Russell Ehlers
Dynamic Simulation and Graphics for the Injection Molding of Three-Dimensional Thin Parts
Pressure Effects on Rheological Behavior of Melt Polymers – A Discussion in Relation to Polymer Processing
Polymer Processing Hall of Fame Established at the University of Akron Polymer Engineering Center