Article
Publicly Available
Picture of the Month
Published/Copyright:
December 10, 2024

Grasshopper / Heuschrecke

Edge of a cooling hole of a turbine blade with protective coating / Rand einer Kühlbohrung einer Turbinenschaufel mit Schutzbeschichtung
Haoyang Zhang
Institute of Metal Research
Chinese Academy of Sciences
Failure Analysis Center
Have you also made a snapshot? Send it to: pmeditor@materialography.net (don‘t forget your name and your address). Every picture that is printed will be awarded and you will receive a little present.
Haben auch Sie einen Schnappschuss? Senden Sie diesen an: pmeditor@materialography.net(mit Angabe von Namen und Adresse). Jedes abgedruckte Bild wird prämiert und Sie erhalten ein kleines Dankeschön.
Published Online: 2024-12-10
Published in Print: 2024-12-15
© 2024 Walter de Gruyter GmbH, Berlin/Boston
Articles in the same Issue
- Contents
- Editorial
- Editorial
- Optimizing the design of the selective melt dispersion (SMD) process based on metallographic investigations of additively manufactured 316L steel samples
- Comparison of etchants for corrosion-resistant stainless steels in medical engineering
- Investigation on the impact of parameters of FSW on microstructural transitions and the strength of CDA 101 joints
- Failure Analysis
- Recommendations for the metallographic preparation of crack-like defects in PBF-LB/M additively manufactured alloy 625 builds
- Picture of the Month
- Picture of the Month
- People
- Cloeren Technology’s 20th anniversary
- News
- News
- Meeting Diary
- Meeting Diary
Articles in the same Issue
- Contents
- Editorial
- Editorial
- Optimizing the design of the selective melt dispersion (SMD) process based on metallographic investigations of additively manufactured 316L steel samples
- Comparison of etchants for corrosion-resistant stainless steels in medical engineering
- Investigation on the impact of parameters of FSW on microstructural transitions and the strength of CDA 101 joints
- Failure Analysis
- Recommendations for the metallographic preparation of crack-like defects in PBF-LB/M additively manufactured alloy 625 builds
- Picture of the Month
- Picture of the Month
- People
- Cloeren Technology’s 20th anniversary
- News
- News
- Meeting Diary
- Meeting Diary