Home Ultrasonic testing as a means of safety in railway transport / Ultraschallprüfung als eine Maßnahme zur Sicherung von Eisenbahntransporten / Essais ultrasonores en moyenne pour protection des transports de chemin do fer
Article
Licensed
Unlicensed Requires Authentication

Ultrasonic testing as a means of safety in railway transport / Ultraschallprüfung als eine Maßnahme zur Sicherung von Eisenbahntransporten / Essais ultrasonores en moyenne pour protection des transports de chemin do fer

  • Sàndor Kecskés , Pál Réti and István Virág
Published/Copyright: May 12, 2021
Become an author with De Gruyter Brill

Published Online: 2021-05-12
Published in Print: 1983-01-01

© 2021 by Walter de Gruyter Berlin/Boston

Articles in the same Issue

  1. Aus den Herausgebergesellschaften
  2. Zeitschrift „Materialprüfung‘ im 25. Jahrgang
  3. Aus den Herausgebergesellschaften
  4. Aus der Fachwelt / Wirtschaft
  5. Persönliches
  6. Erfahrungen bezüglich Ortungs- und Rekonstruktionstreue der Ultraschall-Holographie / Experiences in the localisation- and reconstruction performance of ultrasonic holography / De la capabilité de localisation et de qualité d’image du méthode holographie ultrasonore
  7. Elektronisches Härteprüfgerät zur automatischen Kontrolle in der Serienfertigung / Electronic hardness testing device for automatic control in the series production / Appareil électronique pour essais de dureté dans contrôle automatique pour la production en série
  8. Über Prüfeinrichtungen und die Versuchstechnik zur Ermittlung des photoviskoelastischen Verhaltens weicher Kunststoffe / On the testing equipment and experimental techniques for the investigation of the photoviscoelastic behaviour of soft polymers / Des appareils d’essai et la technique expérimentalle pour examiner le comportement photoviscoélastique des ériaux plastiques
  9. Über die Gleichstromleitfähigkeit von als Isolierstoff einsetzbaren Kunststoffen bei Temperaturen von 190 bis 390K / Electrical d.c. conductivity of plastics as isolation materials at temperatures from 190 to 390K / Conductance électrique (courant continer) des plastiques pour isolation dans températures de 190 à 390
  10. Messung des Rißfortschritts durch Zerrüttung bei — 70 "C mit dem Gleichstrom-Potentialsonden-Verfahren / Measurement of fatigue crack propagation at — 70 °C with the d. c. potential probe method / Measurage de propagation des fissures de fatigue dans — 70 °C avec le method potential à courant continu
  11. Ultrasonic testing as a means of safety in railway transport / Ultraschallprüfung als eine Maßnahme zur Sicherung von Eisenbahntransporten / Essais ultrasonores en moyenne pour protection des transports de chemin do fer
  12. Zur Prüfung magnetischer Eigenschaften von Elektroblechen mit einem Induktionsanisometer / Testing of magnetic properties of electrical sheets with an induction anisometer / Essai des charactéristiques magnétiques dans tôles dynamo avec une induction anisometer
  13. Zur Bestimmung der Stützenbetonfestigkeit / About the definitions of the strength of concrete pillars Calcule de résistance de colonne en béton armé
  14. Einfluß der Rißform auf das Prüfergebnis bei der Oberflächenfehlerprüfung / Influence of the crack geometry on the test result at surface defect testing / Influence de géométrie de rupture pour l’issue d’essais dans defects de surface
  15. Normen und Richtlinien
  16. Dokumentation
  17. Autorenverzeichnis
Downloaded on 11.10.2025 from https://www.degruyterbrill.com/document/doi/10.1515/mt-1983-251-211/html
Scroll to top button