Evaluation of radiation interaction parameters of some shape memory alloys
-
S. Tekerek
Abstract
In this study, effective atomic number (Zeff), atomic (σta) and electronic cross section (σte) values of some shape memory alloys (SMA) were calculated at energies 5.9, 6.1, 8, 11.2, 25, 59.543, 75, 112, 149 keV. It has been observed that the obtained values of the calculated parameters vary depending on the photon intensity, chemical constitution and density of the alloys. Calculations were made using the WinXCom program and the graph of the change according to the energy of the obtained results was drawn. The results of this study are thought to be beneficial in the application of various fields.
Abstract
In dieser Studie werden die effektive Ordnungszahl (Zeff), der atomare (σta) und der elektronische Wirkungsquerschnitt (σte) einiger Formgedächtnislegierungen (SMA) bei Energien von 5,9, 6,1, 8, 11,2, 25, 59,543, 75, 112 und 149 keV berechnet. Es wurde festgestellt, dass diese Werte in Abhängigkeit von der Photonenintensität, der chemischen Zusammensetzung und der Dichte der Legierungen variieren. Die Berechnungen wurden mit dem Programm WinXCom durchgeführt, und es wurde die Änderung der Ergebnisse in Abhängigkeit von der Energie erstellt.
References
1 Kaya, M.; Atli, K. C.: Şekil Hafizali Alaşimlarda Martensitik Faz Dönüşümü Veşekil Hafiza Mekanizmasi. Journal of Selcuk-Technic 15 (2016)Search in Google Scholar
2 Mohd Jani, J.; Leary, M.; Subic, A.; Gibson, M. A.: A review of shape memory alloy research, applications and opportunities. Materials & Design (2018–2015) 56 (2014) 1078–1113, DOI:10.1016/j.matdes.2013.11.08410.1016/j.matdes.2013.11.084Search in Google Scholar
3 Sayyed, M. I.; Akman, F.; Kaçal, M. R.: Experimental investigation of photon attenuation parameters for different binary alloys. Radio-chim. Acta 107 (2019) 339–348, DOI:10.1515/ract-2018-307910.1515/ract-2018-3079Search in Google Scholar
4 Seven, S.; Karahan, I. H.; Bakkaloglu, Ö. F.: The measurement of total mass attenuation coefficients of CoCuNi alloys. J. Quant. Spectrosc. Radiat. Transf. 83 (2004) 237–242, 2004, DOI:10.1016/S0022-4073(03)00118-310.1016/S0022-4073(03)00118-3Search in Google Scholar
5 Han, I.; Demir, L.: Mass attenuation coefficients, effective atomic and electron numbers of Ti and Ni alloys. Radiation Measurements 44 (2009) 289–294, DOI:10.1016/j.radmeas.2009.03.01010.1016/j.radmeas.2009.03.010Search in Google Scholar
6 Demir, D.; Turşucu, A.: Measurement of the effective atomic number of FexCr 1-x and FexNix alloys using scattering of gamma rays. J. Alloys Compd. 581 (2013) 213–216, DOI:10.1016/j.jallcom.2013.07.05710.1016/j.jallcom.2013.07.057Search in Google Scholar
7 Yilmaz, D.; Şahin, Y.; Demir, L.: Studies on mass attenuation coefficient, mass energy absorption coefficient, and kerma for Fe alloys at photon energies of 17.44 to 51.70 keV. Turkish J. Phys. 39 (2015) 81–90, DOI:10.3906/fiz-1408-410.3906/fiz-1408-4Search in Google Scholar
8 Büyükyıldız, M.; Kurudirek, M.; Ekici, M.; İçelli, O.; Karabul, Y.: Determination of radiation shielding parameters of 304L stainless steel specimens from welding area for photons of various gamma ray sources. Prog. Nucl. Energy, vol. 100, pp. 245–254, 2017, DOI:10.1016/j.pnucene.2017.06.01410.1016/j.pnucene.2017.06.014Search in Google Scholar
9 Nurveren, K.: Demir Esasli Şeki?l Hafizali Alaşimlar. Ömer Halis-demir Üniversitesi Mühendislik Bilimleri Dergisi 2 (2016) 10–16, DOI:10.28948/ngumuh.23938110.28948/ngumuh.239381Search in Google Scholar
10 Ren, L.; Yang, K.; Guo, L.; Chai, H. W.: Preliminary study of anti-infective function of a copper-bearing stainless steel. Materials Science Engineering C 32 (2012) 1204–1209, DOI:10.1016/j.msec.2012.03.00910.1016/j.msec.2012.03.009Search in Google Scholar
11 Shirai, T.; Tsuchiya, H.; Shimizu, T.; Ohtani, K.; Zen, Y.; Tomita, K.: Prevention of pin tract infection with titanium-copper alloys. J. Biomed. Mater. Res. – Part B Appl. Biomater. 91 (2009) 373–380, PMid:19507137; DOI:10.1002/jbm.b.3141210.1002/jbm.b.31412Search in Google Scholar PubMed
12 Pederson, R.: Microstructure and Phase Transformation of Ti-6Al-4 V. Licentiate Thesis, Lulea University of Technology, Department of Applied Physics and Mechanical Engineering, (2002) 27–30Search in Google Scholar
13 Chen, M.; Zhang, E.; Zhang, L.: Microstructure, mechanical properties, bio-corrosion properties and antibacterial properties of Ti-Ag sintered alloys. Mater. Sci. Eng. C 62 (2016) 350–360, 2016, PMid:26952433; DOI:10.1016/j.msec.2016.01.08110.1016/j.msec.2016.01.081Search in Google Scholar
14 Gerward, L.; Guilbert, N.; Jensen, K. B.; Levring, H.: X-ray absorption in matter. Reengineering XCOM. Technical Note, Radiation Physics and Chemistry 60 (2001) 23 –24, DOI:10.1016/S0969-806X(00)00324-810.1016/S0969-806X(00)00324-8Search in Google Scholar
15 Kaur, T.; Sharma, J.; Singh, T.: Feasibility of Pb-Zn Binary Alloys as Gamma Rays Shielding Materials. International Journal of Pure and Applied Physics 13 (2017) 222–225.Search in Google Scholar
16 Hubbell, J. H.: Review of photon interaction cross section data in the medical and biological context. Phys. Med. Biol. 44 (1999) 1–22, PMid:10071870; DOI:10.1088/0031-9155/44/1/00110.1088/0031-9155/44/1/001Search in Google Scholar
17 Singh, M. P.; Sandhu, B. S.; Singh, B.: Measurement of effective atomic number of composite materials using scattering of c-rays. Nucl. Instruments Methods Phys. Res. Sect. A Accel. Spectrometers, Detect. Assoc. Equip. 580 (2007) 50–53, 2007, DOI:10.1016/j.nima.2007.05.03710.1016/j.nima.2007.05.037Search in Google Scholar
18 Singh, K.; Sing, H.; Sharma, V, Nathuram, R.: Gamma-ray attenuation coefficients in bismuth borate glasses. Nucl. Instruments Methods Phys. Res. Sect. B Beam Interact. with Mater. Atoms 194 (2002) 1–6, DOI:10.1016/S0168-583X(02)00498-610.1016/S0168-583X(02)00498-6Search in Google Scholar
© 2021 Walter de Gruyter GmbH, Berlin/Boston, Germany
Articles in the same Issue
- Frontmatter
- Heat transfer characterization under radial jet and falling film induced rewetting
- Heat transfer at the step of a CANDU calandria during a severe accident
- Criticality analysis for safety-critical software in nuclear power plant distributed control system
- The evaluation of TRACE/PARCS model for BWR-4 nuclear power plant by startup test transient analyses
- The effect of surfactant concentrations and surface material on heat transfer coefficient in nucleate boiling regime
- Experimental investigation on buffer/backfill materials for radioactive waste repository downward facing sorption additivity of cesium, strontium and cobalt with different concentrations
- Evaluation of radiation interaction parameters of some shape memory alloys
- Calendar of events
Articles in the same Issue
- Frontmatter
- Heat transfer characterization under radial jet and falling film induced rewetting
- Heat transfer at the step of a CANDU calandria during a severe accident
- Criticality analysis for safety-critical software in nuclear power plant distributed control system
- The evaluation of TRACE/PARCS model for BWR-4 nuclear power plant by startup test transient analyses
- The effect of surfactant concentrations and surface material on heat transfer coefficient in nucleate boiling regime
- Experimental investigation on buffer/backfill materials for radioactive waste repository downward facing sorption additivity of cesium, strontium and cobalt with different concentrations
- Evaluation of radiation interaction parameters of some shape memory alloys
- Calendar of events
