Article
Licensed
Unlicensed Requires Authentication

Experimental and Finite Element Simulation of MIABWelding of Alloy Steel Tubes in Pressure Parts

  • , , and
Published/Copyright: December 1, 2011
Become an author with De Gruyter Brill
Author Information
Journal for Manufacturing Science & Production
From the journal Journal for Manufacturing Science & Production Volume 11 Issue 1-3

Published Online: 2011-12
Published in Print: 2011-12

©2012 by Walter de Gruyter GmbH & Co.

Articles in the same Issue

  1. Prelims
  2. Modeling and Analysis of Sodium Silicate-Bonded Moulding Sand System Using Design of Experiments and Response Surface Methodology
  3. Production of Nanoscale Titanium Diboride Powders
  4. Production of Nano Silver Sol Particle by Biological Reduction Process
  5. Experimental and Finite Element Simulation of MIABWelding of Alloy Steel Tubes in Pressure Parts
  6. Optimizing Pulsed Current Micro Plasma Arc Welding Parameters to Maximize Ultimate Tensile Strength of SS304L Sheets Using Hooke and Jeeves Algorithm
  7. Application of TOPSIS in the Taguchi Method for Optimal Machining Parameter Selection
https://doi.org/10.1515/jmsp.2011.007

Articles in the same Issue

  1. Prelims
  2. Modeling and Analysis of Sodium Silicate-Bonded Moulding Sand System Using Design of Experiments and Response Surface Methodology
  3. Production of Nanoscale Titanium Diboride Powders
  4. Production of Nano Silver Sol Particle by Biological Reduction Process
  5. Experimental and Finite Element Simulation of MIABWelding of Alloy Steel Tubes in Pressure Parts
  6. Optimizing Pulsed Current Micro Plasma Arc Welding Parameters to Maximize Ultimate Tensile Strength of SS304L Sheets Using Hooke and Jeeves Algorithm
  7. Application of TOPSIS in the Taguchi Method for Optimal Machining Parameter Selection
Downloaded on 12.4.2026 from https://www.degruyterbrill.com/document/doi/10.1515/jmsp.2011.007/html
Scroll to top button