Article
Licensed
Unlicensed
Requires Authentication
Selected Design Criteria for Ozone Production
Published/Copyright:
November 30, 2016
Abstract
Ozone properties that cause a growing interest in its applications have been presented. A short analysis of ozone synthesis in electrical barrier discharges gives some suggestions concerning designs of ozonizers and power supply systems. The presented macrokinetic models make possible to calculate ozone concentration as well as ozone yield and productivity of an ozonizer. All the used formulas contain experimental constants depending on parameters that have not been taken a into account in any previously elaborated theory on ozone synthesis or operation of ozonizers. However, research into ozone synthesis and production continuously develops because of the growing demand for that oxidizer.
Received: 2003-10-15
Revised: 2003-11-5
Accepted: 2003-11-10
Published Online: 2016-11-30
Published in Print: 2004-1-1
© 2016 by Walter de Gruyter Berlin/Boston
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Preface
- Progress in the Visualization of Filamentary Gas Discharges. Part 1: Milestones and Diagnostics of Dielectric-barrier Discharges by Cross-correlation Spectroscopy
- Progress in the Visualization of Filamentary Gas Discharges. Part 2: Visualization of DC Positive Corona Discharges
- Selected Design Criteria for Ozone Production
- Methane Conversion into C2 Hydrocarbons and Carbon Black in Dielectric-barrier and Gliding Discharges
- Microwave Torch Plasmas for Decomposition of Gaseous Pollutants
- Absorption and Decomposition of CH3CHO in the Cylindrical Foaming System
- Pulsed Electric Fields in Liquid Foods Processing Plasma Destruction of Toxic Chloroorganic Wastes Towards Zero Residues
- Plasma Destruction of Toxic Chloroorganic Wastes Towards Zero Residues
- Plasma Generated in Barrier Discharges and Hydrogen Peroxide Applied to the Removal of BTX-Hydrocarbons by Their Oxidation
- Corona Discharge-Molecular Sieve Hybrid System for NOx Removal from Flue Gas
- Low Temperature Metallurgy of Tungsten in Plasma Reactors
Articles in the same Issue
- Preface
- Progress in the Visualization of Filamentary Gas Discharges. Part 1: Milestones and Diagnostics of Dielectric-barrier Discharges by Cross-correlation Spectroscopy
- Progress in the Visualization of Filamentary Gas Discharges. Part 2: Visualization of DC Positive Corona Discharges
- Selected Design Criteria for Ozone Production
- Methane Conversion into C2 Hydrocarbons and Carbon Black in Dielectric-barrier and Gliding Discharges
- Microwave Torch Plasmas for Decomposition of Gaseous Pollutants
- Absorption and Decomposition of CH3CHO in the Cylindrical Foaming System
- Pulsed Electric Fields in Liquid Foods Processing Plasma Destruction of Toxic Chloroorganic Wastes Towards Zero Residues
- Plasma Destruction of Toxic Chloroorganic Wastes Towards Zero Residues
- Plasma Generated in Barrier Discharges and Hydrogen Peroxide Applied to the Removal of BTX-Hydrocarbons by Their Oxidation
- Corona Discharge-Molecular Sieve Hybrid System for NOx Removal from Flue Gas
- Low Temperature Metallurgy of Tungsten in Plasma Reactors
