Effect of mixing temperature on the dispersion and degradation behaviors of HDPE/UHMWPE blends
-
Shiori Watanabe
,
Sayaka Yamada
Abstract
There is currently considerable interest in high-density polyethylene (HDPE)/ultra-high-molecular-weight polyethylene (UHMWPE) blends as recyclable all-polyolefin materials with favorable mechanical properties that can be processed by continuous melt-mixing. Optimal mixing is required to improve the mechanical properties of polymer blends by ensuring their dispersibility and low degradation. In the present study, we investigated the effects of mixing temperature on the dispersion and degradation behaviors of HDPE/UHMWPE blends. Neat HDPE and a HDPE blend comprising 5 % UHMWPE were obtained by melt-mixing while changing the input energy in an internal batch mixer under a nitrogen atmosphere. The temperature of the mixer was set at 200 °C for neat HDPE, and at 180, 200, and 220 °C for the HDPE/UHMWPE blends. Optical microscopy and thermal analysis revealed that the dispersion of UHMWPE in HDPE was accelerated at higher mixing temperatures. However, in the high input energy range, mixing at 200 °C resulted in the most favorable dispersion. Gel permeation chromatography and rheological measurements suggested that chain scission and branching/crosslinking due to degradation were accelerated at higher mixing temperatures, even when mixing in a nitrogen atmosphere. Chemiluminescence measurements suggested that chain scission and branching/crosslinking were caused by an initial oxidation reaction. Furthermore, for the same input energy, the maximum shear stress increased as the mixing temperature decreased, but the mixing time and thermal history increased as the mixing temperature increased. The results suggest that in a blend comprising HDPE and UHMWPE, mixing at the molecular level due to high temperature and fine dispersion of UHMWPE due to shear stress proceed simultaneously. On the other hand, the results also confirmed that degradation was more influenced by the promotion of oxidation due to high temperatures and prolonged mixing than by shear stress.
-
Research ethics: Not applicable.
-
Informed consent: Not applicable.
-
Author contributions: The author(s) have (has) accepted responsibility for the entire content of this manuscript and approved its submission.
-
Competing interests: The author(s) state(s) no conflict of interest.
-
Research funding: None declared.
-
Data availability: Not applicable.
References
Abad, M.J., Ares, A., Barral, L., Cano, J., Díez, F.J., García-Garabal, S., López, J., and Ramírez, C. (2004). Effects of a mixture of stabilizers on the structure and mechanical properties of polyethylene during reprocessing. J. Appl. Polym. Sci. 92: 3910–3916, https://doi.org/10.1002/app.20420.Search in Google Scholar
An, Y., Bao, R.-Y., Liu, Z.-Y., Wu, X.-J., Yang, W., Xie, B.-H., and Yang, M.-B. (2013). Unusual hierarchical structures of mini-injection molded isotactic polypropylene/ultrahigh molecular weight polyethylene blends. Eur. Polym. J. 49: 538–548, https://doi.org/10.1016/j.eurpolymj.2012.10.020.Search in Google Scholar
Aya, T. (1988). Blends and composite materials of general purpose polymers. Kobunshi 37: 802–805, https://doi.org/10.1295/kobunshi.37.802.Search in Google Scholar
Boscoletto, A.B., Franco, R., Scapin, M., and Tavan, M. (1997). An investigation on rheological and impact behaviour of high density and ultra high molecular weight polyethylene mixtures. Eur. Polym. J. 33: 97–105, https://doi.org/10.1016/S0014-3057(96)00115-2.Search in Google Scholar
Diop, M.F., Burghardt, W.R., and Torkelson, J.M. (2014). Well-mixed blends of hdpe and ultrahigh molecular weight polyethylene with major improvements in impact strength achieved via solid-state shear pulverization. Polymer 55: 4948–4958, https://doi.org/10.1016/j.polymer.2014.07.050.Search in Google Scholar
Kealy, T. (2009). Rheological analysis of the degradation of hdpe during consecutive processing steps and for different processing conditions. J. Appl. Polym. Sci. 112: 639–648, https://doi.org/10.1002/app.29418.Search in Google Scholar
La Mantia, F.P., Morreale, M., Botta, L., Mistretta, M.C., Ceraulo, M., and Scaffaro, R. (2017). Degradation of polymer blends: a brief review. Polym. Degrad. Stab. 145: 79–92, https://doi.org/10.1016/j.polymdegradstab.2017.07.011.Search in Google Scholar
Mendes, A.A., Cunha, A.M., and Bernardo, C.A. (2011). Study of the degradation mechanisms of polyethylene during reprocessing. Polym. Degrad. Stab. 96: 1125–1133, https://doi.org/10.1016/j.polymdegradstab.2011.02.015.Search in Google Scholar
Miyasaka, K. and Ishikawa, Y. (1994). Glomu konren souchi ni okeru kongou seigyohouhou, JP. H0621195 B2.Search in Google Scholar
Miyasaka, K. (2001). Trend and problems of rubber mixing. Nippon Gomu Kyokaishi, Jpn. 74: 64–69, https://doi.org/10.2324/gomu.74.64.Search in Google Scholar
Moss, S. and Zweifel, H. (1989). Degradation and stabilization of high density polyethylene during multiple extrusions. Polym. Degrad. Stab. 25: 217–245, https://doi.org/10.1016/S0141-3910(89)81009-2.Search in Google Scholar
Murata, K. and Makino, T. (1973). Thermal degradation of high density polyethylene. J. Chem. Eng. Jpn. 12: 2414–2420, https://doi.org/10.1246/nikkashi.1973.2414.Search in Google Scholar
Pinheiro, L.A., Chinelatto, M.A., and Canevarolo, S.V. (2004). The role of chain scission and chain branching in high density polyethylene during thermo-mechanical degradation. Polym. Degrad. Stab. 86: 445–453, https://doi.org/10.1016/j.polymdegradstab.2004.05.016.Search in Google Scholar
Pinheiro, L.A., Chinelatto, M.A., and Canevarolo, S.V. (2006). Evaluation of Philips and Ziegler–Natta high-density polyethylene degradation during processing in an internal mixer using the chain scission and branching distribution function analysis. Polym. Degrad. Stab. 91: 2324–2332, https://doi.org/10.1016/j.polymdegradstab.2006.04.005.Search in Google Scholar
Pock, E., Kiss, C., Janecska, Á., Epacher, E., and Pukánszky, B. (2004). Effect of chain structure on the processing stability of high-density polyethylene. Polym. Degrad. Stab. 85: 1015–1021, https://doi.org/10.1016/j.polymdegradstab.2003.05.005.Search in Google Scholar
Ruff, M., Lang, R.W., and Paulik, C. (2013). Controlling polyolefin properties by in-reactor blending: 3. mechanical properties. Macromol. React. Eng. 7: 328–343, https://doi.org/10.1002/mren.201200077.Search in Google Scholar
Sawatari, C. and Matsuo, M. (1989). Morphological and mechanical properties of ultrahigh-molecular-weight polyethylene/low-molecular-weight polyethylene blend films produced by gelation/crystallization from solutions. Polymer 30: 1603–1614, https://doi.org/10.1016/0032-3861(89)90319-4.Search in Google Scholar
Scaffaro, R., La Mantia, F.P., Botta, L., Morreale, M., Dintcheva, N.Tz., and Mariani, P. (2009). Competition between chain scission and branching formation in the processing of high-density polyethylene: effect of processing parameters and of stabilizers. Polym. Eng. Sci. 49: 1316–1325, https://doi.org/10.1002/pen.21317.Search in Google Scholar
Shen, H., He, L., Fan, C., Xie, B., Yang, W., and Yang, M. (2015). Improving the integration of HDPE/UHMWPE blends by high temperature melting and subsequent shear. Mater. Lett. 138: 247–250, https://doi.org/10.1016/j.matlet.2014.10.013.Search in Google Scholar
Watanabe, S., Yamada, S., Takeshita, H., and Tokumitsu, K. (2023). Effect of mixing conditions on dispersion and degradation behavior of HDPE/UHMWPE blends. J. Mater. Sci. 72: 392–397, https://doi.org/10.2472/jsms.72.392.Search in Google Scholar
Wu, S. (1987). Formation of dispersed phase in incompatible polymer blends: interfacial and rheological effects. Polym. Eng. Sci. 27: 335–343, https://doi.org/10.1002/pen.760270506.Search in Google Scholar
Zahavich, A.T.P., Latto, B., Takacs, E., and Vlachopoulos, J. (1997). The effect of multiple extrusion passes during the recycling of high density polyethylene. Adv. Polym. Technol. 16: 11–24, https://doi.org/10.1002/(SICI)1098-2329(199721)16:1%3C11::AID-ADV2%3E3.0.CO;2-M.10.1002/(SICI)1098-2329(199721)16:1<11::AID-ADV2>3.0.CO;2-MSearch in Google Scholar
Zhang, L., Lu, C., Dong, P., Wang, K., and Zhang, Q. (2019). Realizing mechanically reinforced all-polyethylene material by dispersing UHMWPE via high-speed shear extrusion. Polymer 180: https://doi.org/10.1016/j.polymer.2019.121711.Search in Google Scholar
© 2024 Walter de Gruyter GmbH, Berlin/Boston
Articles in the same Issue
- Frontmatter
- Review Article
- A comprehensive review on residence time distributions in co-rotating twin-screw extrusion
- Research Articles
- Tearing properties, crystallization behavior, microstructure, and morphology of LLDPE with different short branched chain distributions
- Synergistic modification of hydrolyzed keratin-based rigid polyurethane foam with zinc stannate and aluminum hypophosphite to improve its thermal stability and flame retardant properties
- Effect of mixing temperature on the dispersion and degradation behaviors of HDPE/UHMWPE blends
- Properties of polyphenylene sulfide/multiwalled carbon nanotubes composites: a comparison between compression molding and microinjection molding
- Improvement of the thermal and mechanical behaviour of polystyrene (PS)-based nanocomposite films by modification of the composition and type of nanofiller
- Thermally conductive, mechanically robust alumina-incorporated polyurethane films prepared by ultraviolet light curing
- Flame retardant polyurethane foam prepared from compatible blends of ammonium ligninsulfonate-based and zinc alginate
- Optical, electrical, dielectric and mechanical properties of microcrystalline cellulose/starch based biocomposite films
- An innovative multilayered material fabricated through additive manufacturing for structural applications: method and mechanical properties
Articles in the same Issue
- Frontmatter
- Review Article
- A comprehensive review on residence time distributions in co-rotating twin-screw extrusion
- Research Articles
- Tearing properties, crystallization behavior, microstructure, and morphology of LLDPE with different short branched chain distributions
- Synergistic modification of hydrolyzed keratin-based rigid polyurethane foam with zinc stannate and aluminum hypophosphite to improve its thermal stability and flame retardant properties
- Effect of mixing temperature on the dispersion and degradation behaviors of HDPE/UHMWPE blends
- Properties of polyphenylene sulfide/multiwalled carbon nanotubes composites: a comparison between compression molding and microinjection molding
- Improvement of the thermal and mechanical behaviour of polystyrene (PS)-based nanocomposite films by modification of the composition and type of nanofiller
- Thermally conductive, mechanically robust alumina-incorporated polyurethane films prepared by ultraviolet light curing
- Flame retardant polyurethane foam prepared from compatible blends of ammonium ligninsulfonate-based and zinc alginate
- Optical, electrical, dielectric and mechanical properties of microcrystalline cellulose/starch based biocomposite films
- An innovative multilayered material fabricated through additive manufacturing for structural applications: method and mechanical properties
