Article
Licensed
Unlicensed
Requires Authentication
PPS News
Published/Copyright:
April 1, 2022
Published Online: 2022-04-01
Published in Print: 2022-05-25
© 2021 Walter de Gruyter GmbH, Berlin/Boston
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Frontmatter
- Research Articles
- Influences on the mechanical properties of SRCs in a combined compacting and back injecting process
- Static, fatigue and stress-shielding analysis of the use of different PEEK based materials as hip stem implants
- Numerical simulation and experimental analysis for evaluating warpage of a 3D thin-walled polymeric part using the injection compression molding process
- A molecular dynamics study on the mechanical properties of defective CNT/epoxy nanocomposites using static and dynamic deformation approaches
- Microstructural, functional groups and textural analysis of expanded polyethylene reinforced polystyrene composites with recycled aluminium as ternary component
- Investigation of the adhesive strength in a combined compaction and back-injection process to produce back-injected self-reinforced composites (SRCs)
- Extraction and characterization of Alfa fibers and their use to produce Alfa/wool woven fabrics for composite reinforcement
- Effect of rubber reinforcement with filler on extrusion flow and extrudate swell
- News
- PPS News
Articles in the same Issue
- Frontmatter
- Research Articles
- Influences on the mechanical properties of SRCs in a combined compacting and back injecting process
- Static, fatigue and stress-shielding analysis of the use of different PEEK based materials as hip stem implants
- Numerical simulation and experimental analysis for evaluating warpage of a 3D thin-walled polymeric part using the injection compression molding process
- A molecular dynamics study on the mechanical properties of defective CNT/epoxy nanocomposites using static and dynamic deformation approaches
- Microstructural, functional groups and textural analysis of expanded polyethylene reinforced polystyrene composites with recycled aluminium as ternary component
- Investigation of the adhesive strength in a combined compaction and back-injection process to produce back-injected self-reinforced composites (SRCs)
- Extraction and characterization of Alfa fibers and their use to produce Alfa/wool woven fabrics for composite reinforcement
- Effect of rubber reinforcement with filler on extrusion flow and extrudate swell
- News
- PPS News
