Trends and Highlights in Polymer Processing 1938 to 1988**

Reference

1 Mohr, W.D., Bergen, J. T in: Processing of Thermoplastic Materials. Bernhardt, E. C. (Ed.), Reinhold Publ. Corp., New York, Chapman & Hall, Ltd., London, 1959Search in Google Scholar

2 McKelvey, J. M. : Polymer Processing. John Wiley & Sons, Inc., New York, London, 1962Search in Google Scholar

3 Herrmann, H: Schneckenmaschinen in der Verfahrenstechnik. Springer-Verlag, Berlin, Heidelberg, New York, 197210.1007/978-3-642-51085-4Search in Google Scholar

4 Anders, D. : Kunststoffe 66, p. 250 to 257 (1976)10.2140/pjm.1976.66.257Search in Google Scholar

5 Kapfer, K.: Kunststoffe German Plastics 77, Nr. 4, p. 5 to 7 (1987). Kunststoffe 77, p. 377 to 380 (1987)Search in Google Scholar

6 Automatisierung in der Kunststoffverarbeitung. Menges, G., Recker, H. (Eds.), Hanser Publishers, Munich, Vienna, 1986Search in Google Scholar

7 Spingier, E.: Plastverarbeiter 11, p. 366 to 371 (1960)10.1360/csb1960-5-12-371Search in Google Scholar

8 Schenkel, G.: Kunststoffe German Plastics 69, 10, p. 58 to 66 (1979). Kunststoffe 69, p. 688 to 703 (1979)Search in Google Scholar

9 Fritz, H.-G. in: Kunststoff-Extrusionstechnik II, Extrusionsanlagen. Hensen, F, Knappe, W.; Potente, H. (Eds.), Hanser Publishers, Munich, Vienna, 1986Search in Google Scholar

10 Schenkel, G. : Kunststoffe 75, 6, p. V to XX (1985)Search in Google Scholar

11 Romanowski, A.: Kunststoffe 43, p. 134 to 137 (1953)Search in Google Scholar

12 Kühnle, H.: Journ Polymer Enging. 6, p. 51 to 77 (1986)10.1515/POLYENG.1986.6.1-4.51Search in Google Scholar

13 Kühnle, H: Paper 2/6 presented at the Third Annual Meeting of the Polymer Processing Society, Stuttgart, 8. April 1987Search in Google Scholar

14 Rauwendahl, Chr.: Polymer Extrusion. Hanser Publishers, Munich, Vienna, New York, 1985Search in Google Scholar

15 Kunststoff-Extrusionstechnik II. Hensen, F., Knappe, W., Potente, H. (Eds.), Hanser Publishers, Munich, Vienna, 1986Search in Google Scholar

16 Löhr, D.: Kunststoffe 77, p. 73 to 77 (1987)Search in Google Scholar

17 Verse, N.: Kunststoffe 77, p. 83 to 89 (1987)10.1108/eb011789Search in Google Scholar

18 Schumacher, F: Kunststoffe 77, p. 96 to 99 (1987)19. Brinkschröder, F.-J.: Kunststoffe 77, p. 89 to 95 (1987)Search in Google Scholar

19 Schumacher, F: Kunststoffe 77, p. 96 to 99 (1987)19. Brinkschröder, F.-J.: Kunststoffe 77, p. 89 to 95 (1987)Search in Google Scholar

20 Federlein, K.: Kunststoffe German Plastics 77, 5, p. 22 (1987). Kunststoffe 77, p. 493 to 495 (1987)Search in Google Scholar

21 Hessenbruch, R.: Kunststoffe German Plastics 77, 5, p. 11 to 14 (1987) – Kunststoffe 77, 5 p. 475 to 479 (1987)Search in Google Scholar

22 Feistkorn, W., Sensen, K.: Kunststoffe German Plastics 77, p. 10 to 11 (1987) – Kunststoffe 77, p. 472 to 474 (1987)Search in Google Scholar

23 Hinsken, H: Kunststoffe German Plastics 77, 5, p. 3 to 9 (1987) – Kunststoffe 77, p. 461 to 471 (1987)Search in Google Scholar

24 Papers presented at the VDI-Symposium: Qualitätsbewußt Extrudieren. Baden-Baden, 20/30 September 1987Search in Google Scholar

25 N. N.: K-Plastic- & Kautschuk-Zeitung 352, p. 6 (1987)Search in Google Scholar

26 Kanai, R.: Intern. Polymer Processing 1, p. 137 to 143 (1987)10.1515/ipp-1987-0005Search in Google Scholar

27 Fifth Leobener Kunststoffkolloquium: Doppelschneckenextruder, 9. to 10. Nov. 1978, Institut für Kunststoffverarbeitung, Montan-Universität Leoben (Austria)Search in Google Scholar

28 Szydlowski, W., White, J. L.: Paper 2/3 presented at the Third Annual Meeting of the Polymer Processing Society, Stuttgart, 8. April 1987Search in Google Scholar

29 Szydlowski, W. Brzoskowski, R., White, J. L.: Intern. Polymer Processing 1, p. 207 to 214 (1987)10.3139/217.870207Search in Google Scholar

30 Quigley, S. F, Petrie, S. P: Paper 4/13 presented at the Third Annual Meeting of the Polymer Processing Society, Stuttgart, 10. April 1987Search in Google Scholar

31 Meijer, H. E. H, Elemans, P. H. M.: Paper 4/14 presented at the Third Annual Meeting of the Polymer Processing Society, Stuttgart, 10. April 1987Search in Google Scholar

32 Poltersdorf, B.; Fiedler, L.: Paper 4/15 presented at the Third Annual Meeting of the Polymer Processing Society, Stuttgart, 10. April 1987Search in Google Scholar

32a White, J. L., Szydlowski, W., Min, K., Kim, M.-H.: Advances in Polymer Technology 7, p. 295 to 332 (1987)10.1002/adv.1987.060070306Search in Google Scholar

33 Simonds, H. R., Weith, A. J., Schack, W.: Extrusion of Plastics, Rubber and Metals. Reinhold Publ. Corp./Book Division, New York, 1952Search in Google Scholar

34 Carley, J. F, Strub, R. A., Mallouk, R. S., McKelvey, J. M., Jepson, C. H. in: Extrusion Symposium/Polychemicals Dept. E. I. DuPont de Nemours & Co./American Chemical Society. Ind. Engng. Chem. 45, p. 969 to 993 (1953)Search in Google Scholar

35 Schenkel, G.: Schneckenpressen für Kunststoffe. Hanser Publishers, Munich 1959Search in Google Scholar

36 Schenkel, G.: Kunststoff-Extrudertechnik, Hanser Publishers, Munich 1963Search in Google Scholar

37 Schenkel, G.: Plastics Extrusion Technology and Theory. Iliffe Books Ltd., London 1966; American Elsevier Publishing Company Inc., New York, 1966Search in Google Scholar

38 Schenkel, G.: Industrie Anzeiger 94, 6, p. 113 to 118 (1972)Search in Google Scholar

39 Maillefer, Ch.: Etude théorique et expérimentale sur le fonctionnement des boudineuses. Diss. Univ. Lausanne, Lausanne, 1952Search in Google Scholar

40 German Patent 1207074 (1960), Maillefer, Ch.Search in Google Scholar

41 Fuchs, G.: Plastverarbeiter 19, p. 765 to 771 (1968) and 20, p. 237 to 244 (1969) and 21, p. 235 to 244 (1970)Search in Google Scholar

42 Boes, D.: Kunststoffe 60, p. 294 to 300 (1970)Search in Google Scholar

43 Grünschloß, E.: Paper 3.4 presented at the 9th Stuttgarter Kunststoffkolloquium, 13. March 1985Search in Google Scholar

44 Grünschloß E. : Kunststoffe 75, p. 850 to 854 (1985)Search in Google Scholar

45 Schüle, H., Fritz, H.-G.. Kunststoffe German Plastics 77, 4, p. 11 to 15 (1987). Kunststoffe 77, p. 387 to 393 (1987)Search in Google Scholar

46 N. N.: K-Plastic- & Kautschuk-Zeitung 352, p. 17 (1987)Search in Google Scholar

47 N. N. ReifenhäuserNachr. Nr. 12 (1987)Search in Google Scholar

48 Fritz, H.-G.: Paper 4.1 presented at the Seventh Stuttgarter Kunststoffkolloquium, 8. April 1981Search in Google Scholar

49 Winter, H. H, Fritz. H.-G. Polymer Engng. Science 26, p. 543 to 553 (1986)10.1002/pen.760260805Search in Google Scholar

49a N. N.: Reifenhäuser-Nachr. Nr. 13 (1987)Search in Google Scholar

49b N.N.: K-Plastic- & Kautschuk-Zeitung 358, p. 20 (1987)Search in Google Scholar

50 Halter, H: Industrial & Prod. Engng. (IPE) 11, 1, p. 26 to 30 (1987) – Kunststoffe 76, p. 1055 to 1058 (1986)Search in Google Scholar

51 Sonntag, R.: Kunststoffe 75, 4, p. V to XIV (1985)10.1177/0094582X8501200404Search in Google Scholar

52 Boundy, R. H., Boyer, F. Styrene. Hafner Publ., New York. (Ref.: Laeis, M. E.: Der Spritzguß thermoplastischer Massen. Hanser Publishers, Munich, Vienna, New York, p. 27, 1959Search in Google Scholar

53 Vlachopoulos, J., Mavridis, H., Hrymak, A. N.: Paper 5/1 presented at the Third Annual Meeting of the Polymer Processing Society, Stuttgart, 8. April 1987Search in Google Scholar

54 Latrobe, A., Bung, H, Delalande, M. E.: Paper 5/2 presented at the Third Annual Meeting of the Polymer Processing Society, Stuttgart, 8. April 1987Search in Google Scholar

55 Rothe, J.: Kunststoffe 76, p. 307 to 317 (1986). Industrial & Production Engng. (IPE) 10, 3, p. 14, 16, 25, 28, 30, 32, 35, 36 (1986)Search in Google Scholar

56 Rothe, J. : Kunststoffe 77, 4, p. 177 to 187 (1987)Search in Google Scholar

57 Johannaber, F: Kunststoffe 71, p. 702 to 715 (1981)Search in Google Scholar

58 Goller, H : Kunststoffe 49, p. 531 to 542 (1959)Search in Google Scholar

59 Morse, A. R.: SPE-Journ. 17, p. 539 to 544 (1961) – Resumé in German: Kunststoffe 52, p. 234 (1962)Search in Google Scholar

60 Papers presented at the VDI-Symposium: Konstruieren von Spritzgießwerkzeugen. Bamberg, 6./7. Mai 1987Search in Google Scholar

61 N. N.: K-Plastic- & Kautschuk-Zeitung 345, p. 15/16 (1987)10.1016/0305-0483(87)90034-XSearch in Google Scholar

62 Holzmann, R.: Kunststoffe 69, p. 704–711 (1979)Search in Google Scholar

63 Holzmann, R.: Kunststoffe 75, 8, p. V–XIX (1985)Search in Google Scholar

64 Schneiders, A.: Kunststoffe 75, p. 590–595 (1985)Search in Google Scholar

65 Wachsmann, M.: Kunststoffe 75, p. 595–599 (1985)Search in Google Scholar

66 Esser, K.: Chapter 9 in [6], with 21 referencesSearch in Google Scholar

67 Holzmann, R.: Chapter 10 in [6], with 22 referencesSearch in Google Scholar

68 Fritz, H.-G.: Chapter 12 in [15], with 68 referencesSearch in Google Scholar

69 Bailey, J.: Modem Plastics 22, 4, p. 127–133 and 193–200 (1945)Search in Google Scholar

70 N. N.: K-Plastic- & Kautschuk-Zeitung, 348, p. 1, 3, 8, 9, 10, 11, 13, 16 (1987)10.1192/pb.11.10.348Search in Google Scholar

71 Schneiders, A.: Kunststoffe 71, p. 684–687 (1981)Search in Google Scholar

72 N. N.: K-Plastic- & Kautschuk-Zeitung, 352, p. 18 (1987)10.1097/00000637-198704000-00013Search in Google Scholar

73 Papers presented at the VDI-Symposium “Blasformen von Verpackungen und technischen Hohlkörpern” on 22./24. Sept. 1987 in Sao Paulo/Bras.Search in Google Scholar

74 Hess, D.: Paper presented at the SKZ, Würzburg, on 4. June 1985 (see reprints, p. 16/30)Search in Google Scholar

75 Fritz, H.-G.: Kunststoffe 68, p. 450–456 (1978)Search in Google Scholar

76 Fritz, H.-G.: Kunststoffe 71, p. 687–699 (1981)10.1364/JOSA.71.000687Search in Google Scholar

77 Shunsakuttirata, Kishimoto: SPE-Journ. 25, Nr. 11, p. 39–41 (1969)Search in Google Scholar

78 N. N.: Plastics Technology 30, 11, p. 43 ff. (1984)10.2307/20555543Search in Google Scholar

79 Wachsmann, M.: Plastverarbeiter 36, p. 12–23 (1985)10.1080/07293682.1985.9657261Search in Google Scholar

80 Brownbill, D.: Modem Plastics Int. 15, 6, p. 55–57 (1985)10.1097/00152193-198510000-00021Search in Google Scholar

81 Onasch, J.; Junk, P. B.: Kunststoffe 77, p. 663–668 (1987)Search in Google Scholar

82 Boysen, M.: Kunststoffe German Plastics 77, 5, p. 35–37 (1987). (Kunststoffe 77 p. 522–525 (1987))Search in Google Scholar

83 Roppel, H.-O.: Kunststoffe German Plastics 77, 5, p. 17–21 (1987). – Kunststoffe 77, p. 485–492 (1987)Search in Google Scholar

84 Niessen, K. D.; Seifert, K.-H.: Kunststoffe 77, p. 669-672 (1987)Search in Google Scholar

85 Mahn, H.; Orth, H; Roitzsch, K.-H.; Woeckener, W.: Kunststoffe 75, 10, p. V–XXVI (1985)Search in Google Scholar

86 Wolf, R. F: India Rubber World 8, p. 39–40 (1936)Search in Google Scholar

87 Kopsch, H.: Kalandertechnik. Hanser Publishers, Munich, Vienna 1978Search in Google Scholar

88 Radehaus, W.: Plaste 5 Kautschuk 4, p. 327–329 (1957)Search in Google Scholar

89 Perlberg, S. E.; Seanor, R. C.: SPE-Journ. 22, 7, p. 57/61 (1966)Search in Google Scholar

90 Schenkel, G.; Takserman-Krozer, R.: Paper presented at the Fourth Stuttgarter Kunststoffkolloquium, 21. Febr. 1975Search in Google Scholar

91 Takserman-Krozer, R.; Schenkel, G.; Ehrmann, G.: Rheologica Acta 14, p. 1066–1076 (1975)10.1007/BF01515902Search in Google Scholar

92 Rautenberg, L.; Münnich, J. : Kunststoffe 77, p. 104–106 (1987)Search in Google Scholar

93 Schenkel, G.: Plastverarbeiter 28, p. 61–70 (1977)10.1242/jcs.28.1.61Search in Google Scholar

94 Kleine-Brockhoff, Th.: Stuttgarter Zeitung 144, p. 13 (27. June 1987)Search in Google Scholar

95 N. N.: Engineering 17, p. 114, 606–607 (1922)10.1243/PIAE_PROC_1922_017_044_02Search in Google Scholar

96 Rowell, H. S.; Finlayson, D.: Engineering 23, p. 126, 249–250, 385–387, 678 (1928)Search in Google Scholar

97 Darnell, W. H.; Mol, E. A. J.: SPE-Journ. 12, 4, p. 20–29 (1956)Search in Google Scholar

98 Tadmor, Z.; Klein, I.: Engineering Principles of Plasticating Extrusion. Van Nostrand Reinhold Publishing Corp., New York, 1970Search in Google Scholar

99 Martin, G. : Kunststofftechnik 11, p. 333 (1972)10.1016/0026-2714(72)90573-2Search in Google Scholar

100 Schenkel, G.: Kunststoffe 60, p. 52–60 (1970)Search in Google Scholar

101 Schenkel, G.: Kühnle, H. Kunststoffe 73, p. 17–22 (1983)Search in Google Scholar

102 German Patent 1016009 (1954), ReifenhäuserSearch in Google Scholar

103 N. N.: POLYCAD /A Finite Element Program for Polymer Process Analysis and Design. Bulletin edited by CAPPA-D/Dept. of Chemical Engineering/McMaster University, Hamilton, Ontario, Canada, March 1987Search in Google Scholar

104 Rödig, A.; Kühnle, H.: Paper 4.1 presented at the Tenth Stuttgarter Kunststoffkolloquium, 18. March 1987Search in Google Scholar

105 Ardichvili, G.: Kautschuk 14, Nr. 2, p. 23–25, 41–45 (1938)10.1111/j.1540-4781.1938.tb02789.xSearch in Google Scholar

106 Gaskell, R. E. Journ. Applied Mechanics 18, Trans. ASME 73, p. 12 ff. (1951)10.1115/1.4010215Search in Google Scholar

107 Chong, J. S.: Journ. Appl. Polymer Science 12, p. 191 ff. (1968)10.1002/app.1968.070120118Search in Google Scholar

108 Dexter, F. D.; Marshall, D. I.: SPE-Journ. 12, Nr. 4, p. 17 ff. (1956)Search in Google Scholar

109 Marshall, D. I.: Chapter 6 in [1].Search in Google Scholar

110 Unkrüer, W.: Druckverlauf und Fließvorgänge im Walzspalt. Diss. Rhein. Westf. Techn. Hochsch. (RWTH) Aachen, 1970. (Reprinted in: Kunststoff-Berater 1971, p. 785–792, 941–945, 1057–1061, and 1972, p. 43–47)Search in Google Scholar

111 Vlachopoulos, J.; Mitsoulis, E.: Fluid Flow and Heat Transfer in Calendering. Reprint of Manuscript, to appear in Adv. Transp. Proc. 1987Search in Google Scholar

112 Gooch, K. J.: Modem Plastics 34, March, p. 165 ff. (1957)10.1007/BF02670942Search in Google Scholar

113 Private Communications by W. Wöckener (Berstorff) and H. Theysohn (Troester)Search in Google Scholar

114 Schenkel, G.: Kunststoff & Gummi 5, Nr. 9, p. 305–310, Nr. 10, p. 350–355 (1966) (German Patents 1254338 and 1255916)Search in Google Scholar

115 Schenkel, G.: RAPRA-Translation of [114] Part I. Shawbury, Shrewsbury, Shrophsire, Sept. 1967Search in Google Scholar

116 Albers, A.; Lotz, E.: Paper 2/4 presented at the Third Annual Meeting of the Polymer Processing Society, Stuttgart, 8. April 1987Search in Google Scholar

117 V. N.: K-Plastic- & Kautschuk-Zeitung 352, p. 32 (1987)Search in Google Scholar

118 Westover, R. F: SPE-Journ. 18, p. 1473–1480 (1962)10.1016/S0371-1951(62)80272-0Search in Google Scholar

119 Smoluk, G. R.: Modem Plastics 40, Nov., p. 119 (1962); see also: Kunststoffe 54, p. 113 (1964)Search in Google Scholar

120 Weissenberg, K.: Arch. Sci. Physiques Natur. 17, Nr. 1 (1934)Search in Google Scholar

121 Maxwell, B.; Scalora, A. J.: Modem Plastics 37, Oct., p. 107 ff. (1959)Search in Google Scholar

122 Scalora, A. J.; Plymale, Ch, E.: Wire and Wire Products 36, Aug., p. 1000 ff. (1961)Search in Google Scholar

123 US-Patent 3046603 (1958), Research Corp., New YorkSearch in Google Scholar

124 Fritz, H.-G.: Kunststofftechnik 6, p. 430 (1968)Search in Google Scholar

125 Fritz, H.-G.: Diss. Univ. Stuttgart, 1971Search in Google Scholar

126 German Patent 1129681 (1952), Gabrielli, E.Search in Google Scholar

127 Brit. Patent 759354 (1952), Gabrielli, E.Search in Google Scholar

128 US-Patent 3880564 (1972), Asco EngineeringSearch in Google Scholar

129 US-Patent 4012477 (1975), Asco EngineeringSearch in Google Scholar

130 Vogt, A.: Kunststoffe 44, p. 151–153 (1954)Search in Google Scholar

131 Kirkwood, J. G.; Auer, P. L.: Journ. Chem. Phys. 19, p. 281–283 (1951). - Ref.: Chapter 12 in: Dynamics of Polymeric Fluids, Vol. 2 (Kinetic Theory). Bird, R. B.; Hassager, O.; Armstrong, R. C.; Curtiss, Ch. F. (Eds.). John Wiley & Sons, New York, Santa Barbara, London, Sydney, Toronto 197710.1063/1.1748194Search in Google Scholar

132 Maertin Cl.: Ehrenstein, G. W.; Chwalisz, L.; Macskàsi, L.: Paper 10/2 presented at the Third Annual Meeting of the Polymer Processing Society, Stuttgart, 9. April 1987Search in Google Scholar

133 N. N.: Report on a Kolloquium at Kassel on 26./27. Febr. 1987. – K-Plastic- & Kautschuk-Zeitung 345, p. 9–12 (1987)Search in Google Scholar

134 Matsubara, I.; Magill, J. H.: Polymer Science (Phys. Ed.) 11, p. 1173 ff. (1973)10.1002/pol.1973.180110610Search in Google Scholar

135 Shankernarayanan, M. J.; Sun, D. C.; Kojima, M.; Magill, J. H: Intern. Polymer Processing 1, p. 66–76 (1987)10.3139/217.870066Search in Google Scholar

136 O’Brien, K. T: Paper 10/5 presented at the Third Annual Meeting of the Polymer Processing Society, Stuttgart, 9. April 1987Search in Google Scholar

137 Fahnler, F. : Kunststoffe 77, p. 198–199 (1987)Search in Google Scholar

138 Eyerer, P: Kunststoffe 77, p. 298–302 (1987)10.1016/0304-3940(87)90516-7Search in Google Scholar

139 Thienel, P: Kunststoffe 77, p. 188–193 (1987)Search in Google Scholar

140 Weber, A.: Schiffshebung mit Styropor. Works-Journal “Die BASF” 15, 3, p. 148–156. BASF, Ludwigshafen, West Germany 1965Search in Google Scholar