Nanograin size, high-nitrogen austenitic stainless steels
-
Markus O. Speidel
Abstract
A new class of high-strength steels has been developed by combining solid solution hardening and grain boundary hardening in high-nitrogen austenitic stainless steels. Average grain diameters from 50 to 250 nm can be achieved, and yield strength levels of more than 2000 MPa in the solution-annealed condition have been measured. The effect of nitrogen solid solution hardening and grain boundary hardening is systematically explored.
Abstract
Eine neue Gruppe hochfester austenitisch rostfreier Stähle wird vorgestellt. Mit Stickstoffgehalten um 1 Gew.-% und Korngrößen von 50 bis 250 nm werden Streckgrenzen im lösungsgeglühten Zustand von über 2000 MPa erzielt. Die Wirkung von Stickstoff auf die Mischkristallhärtung und Feinkornhärtung wurde systematisch erforscht.
Dedicated to Professor Dr. Otmar Vöhringer on the occasion of his 65th birthday
References
[1] W. Köster, W. Konzelmann: Z. Metallkd. 54 (1963) 132.10.1515/ijmr-1963-540303Search in Google Scholar
[2] W. Köster, M. O. Speidel: Z. Metallkd. 56 (1965) 585.10.1515/ijmr-1965-560901Search in Google Scholar
[3] O. Vöhringer: Metall 30 (1976) 1150.Search in Google Scholar
[4] “Wieland Kupferwerkstoffe”, Wieland-Werke AG, Ulm, Germany (1999).Search in Google Scholar
[5] E.O. Hall: Proc. Phys. Soc. London B 64 (1951) 747.10.1088/0370-1301/64/9/303Search in Google Scholar
[6] N.J. Petch: J. Jron Steel Inst. 174 (1953) 25.Search in Google Scholar
[7] M.O. Speidel, in: Stainless Steel World Conference 2001, Den Hague, KCI Publishing (2001) 98.Search in Google Scholar
[8] W. Bleck, C. Herzig, U. Lorenz: Steel Res. 72 (2001) 406.10.1002/srin.200100142Search in Google Scholar
[9] N. Paulus: Ph. D. Thesis, ETH Zürich No. 10899, DGM Informationsgesellschaft, Oberursel (1994).Search in Google Scholar
[10] National Institute for Materials Science (NIMS), Sixth Workshop on the Ultra Steel, Tsukuba, Japan, May 21, 2002.Search in Google Scholar
[11] J. Friedel: Les Dislocations, Gauthier –Villars, Paris (1956) 248.Search in Google Scholar
[12] R.L. Fleischer: Acta Metall. 9 (1961) 996 and 11 (1963) 203.10.1016/0001-6160(61)90242-5Search in Google Scholar
[13] H.J. Speidel: Ph. D. Thesis, ETH Zürich No. 14888 (2002).Search in Google Scholar
© 2003 Carl Hanser Verlag, München
Articles in the same Issue
- Frontmatter
- Articles/Aufsätze
- Bedeutung von Eigenspannungsabbau und mikrostrukturellen Veränderungen für die Lebensdauervorhersage schwingbeanspruchter Schweißverbindungen
- Factors affecting cyclic lifetime of EB-PVD thermal barrier coatings with various bond coats
- Depth-resolved X-ray residual stress analysis in PVD (Ti, Cr) N hard coatings
- Crystal orientation and residual stress in TiN film by synchrotron radiation
- Characterization of thermal and anodic oxide layers on β- and on near-β-titanium alloys for biomedical application
- Micromechanisms and modelling of crack initiation and growth in tool steels: role of primary carbides
- Fatigue crack nucleation at grain boundaries – experiment and simulation
- Fatigue and fracture-induced defect structures of metals investigated by positron microscopy
- Deformation and fracture of Nb/α-Al2O3 composites in compression and bending studied by optical methods
- Dislocation microstructures of single crystal ⟨001⟩ CMSX-4 specimens tensile tested at 700 and 1000°C
- Influence of mechanical surface treatments on the HCF performance of the Ni-superalloy Udimet 720 LI
- Precipitation of β-phase and twinning during deformation of Mg–Al alloy AZ91 at 150 °C after solution treatment
- Nanograin size, high-nitrogen austenitic stainless steels
- Der dynamische SD-Effekt und der Einfluss auf die Fließortkurve
- Einfluss der Umformgeschwindigkeit und -temperatur auf das Fließverhalten metallischer Werkstoffe
- Mean stress sensitivity of sintered iron and steel
- Thermozyklisches Kriechen einer kurzfaserverstärkten Aluminium-Kolbenlegierung
- Strength and ductility of thin Cu wires
- Modeling of deformation behavior of copper under equal channel angular pressing
- Reaktionssintern von AlMg–MgO zur Herstellung von Bauteilen auf Spinellbasis
- Determination of the local oxygen distribution in a commercial titanium alloy by 3-dimensional atom probe
- Phase diagram of the Al–Cu–Fe quasicrystal-forming alloy system
- Notifications/Mitteilungen
- Personal/Personelles
- Books/Bücher
- Conferences/Konferenzen
Articles in the same Issue
- Frontmatter
- Articles/Aufsätze
- Bedeutung von Eigenspannungsabbau und mikrostrukturellen Veränderungen für die Lebensdauervorhersage schwingbeanspruchter Schweißverbindungen
- Factors affecting cyclic lifetime of EB-PVD thermal barrier coatings with various bond coats
- Depth-resolved X-ray residual stress analysis in PVD (Ti, Cr) N hard coatings
- Crystal orientation and residual stress in TiN film by synchrotron radiation
- Characterization of thermal and anodic oxide layers on β- and on near-β-titanium alloys for biomedical application
- Micromechanisms and modelling of crack initiation and growth in tool steels: role of primary carbides
- Fatigue crack nucleation at grain boundaries – experiment and simulation
- Fatigue and fracture-induced defect structures of metals investigated by positron microscopy
- Deformation and fracture of Nb/α-Al2O3 composites in compression and bending studied by optical methods
- Dislocation microstructures of single crystal ⟨001⟩ CMSX-4 specimens tensile tested at 700 and 1000°C
- Influence of mechanical surface treatments on the HCF performance of the Ni-superalloy Udimet 720 LI
- Precipitation of β-phase and twinning during deformation of Mg–Al alloy AZ91 at 150 °C after solution treatment
- Nanograin size, high-nitrogen austenitic stainless steels
- Der dynamische SD-Effekt und der Einfluss auf die Fließortkurve
- Einfluss der Umformgeschwindigkeit und -temperatur auf das Fließverhalten metallischer Werkstoffe
- Mean stress sensitivity of sintered iron and steel
- Thermozyklisches Kriechen einer kurzfaserverstärkten Aluminium-Kolbenlegierung
- Strength and ductility of thin Cu wires
- Modeling of deformation behavior of copper under equal channel angular pressing
- Reaktionssintern von AlMg–MgO zur Herstellung von Bauteilen auf Spinellbasis
- Determination of the local oxygen distribution in a commercial titanium alloy by 3-dimensional atom probe
- Phase diagram of the Al–Cu–Fe quasicrystal-forming alloy system
- Notifications/Mitteilungen
- Personal/Personelles
- Books/Bücher
- Conferences/Konferenzen
