On the Constitutive Law of Environment Assisted Fatigue: The Physical Meaning ofthe Paris Type’Eguatiöns Part 1

Articles in the same Issue

1. Inhalt
2. Aufsätze
3. Assessment of the Mg-Zn System
4. The Effect of Growth Velocity on Growth Temperature of the Al - Al3Fe and Al - Al6Fe Eutectics
5. As-Cast Structure and the Effects of Temperature on an Al-Si Metal Matrix Composite Reinforced with Ni3Al-Type Ribbons
6. Structure and Properties of Austenitic Precipitation-Hardened P/M Steels
7. Titanium Aluminides on Aluminium Surfaces by CO2 Laser Alloying
8. Solidification Processes in Laser Surface Melted Al-30 wt.% Zn Alloys
9. Factors Influencing the Deposition Rate of Ni-B Electroless Films
10. On the Crystallization Behaviour of an Amorphous Ni-17.8 at.% B Klectroless Deposit
11. Transmission Electron Microscopy Observations of Nickel Crystallites Prepared from Ni2Al3 Compound
12. Electron Microscopic Studiesof Modulated Phases in SmNi5 Bulk and Thin Film Form
13. Plastic Zone Size Measurements in Al-Zn- Mg Alloys by Means of Selected Area Channelling Patterns
14. Entwicklung und Anwendungen der röntgenographischen Spannungsanalyse an polymeren Werkstoffen und deren Verbunden
15. On the Constitutive Law of Environment Assisted Fatigue: The Physical Meaning ofthe Paris Type’Eguatiöns Part 1
16. Mitteilungen
17. Deutsche Gesellschaft für Materialkunde e.V.
18. Personen
19. Veranstaltungen
20. Buchbesprechung
21. Impressum
22. Impressum