Friction-Induced Martensitic Transformation of Hot-Rolled Austenitic Mn-Steels

Articles in the same Issue

1. Analysis of Subgrain Boundaries in the y’ Phase of a Nickel-Base Single Crystal Alloy After High Temperature Creep
2. Recrystallization Behavior of Al-Fe-Alloy Foils With Rapid Heating
3. Nucleation of the Proeutectoid Ferrite and its Role in the Formation of the Transformation Texture in a Low Carbon Steel
4. Thermodynamic Behaviour of Pd-Si, Pd-Ge and Pt-Ge Molten Alloys
5. Deformation of Al-2 wt.% Ge and Al-4 wt.% Ge Alloys in the Presence of Precipitation of Varying Amounts
6. Deformation of Al-Si and Al-Fe High Purity Alloys in the Presence of Precipitation of Varying Amounts
7. Thermodynamische Berechnung der Phasengleichgewichte des Systems Li-LiH im Temperaturbereich von 450 bis 1200 K
8. Friction-Induced Martensitic Transformation of Hot-Rolled Austenitic Mn-Steels
9. Thermodynamic Properties of Ternary B2-Phases with Triple-Defects
10. Phase Relations and Diffusion Paths in the System Zinc Vapor — Iron Silicon Alloys at 773 and 973 K
11. Thermodynamics and Solidification of Al-Cu-Mg-Si Alloys
12. A Thermodynamic Evaluation of the C-Ni-W System
13. The Influence of Stress Field on the Weld Toe Cracking of Weld Joints of 7000 Alloy Plates
14. Gesellschaftsnachrichten
15. Bücher- und Zeitschriftenschau