Skip to main content
Article
Licensed
Unlicensed Requires Authentication

A Computational Methodology to Support Reimbursement Requests Analysis Concerning Electrical Damages

  • EMAIL logo , , and
Published/Copyright: September 16, 2015

Abstract

In light of the growing number of reimbursement requests processed from consumers for electrical damage to equipment, supposedly caused through the manifestation of anomalies on the power grid, there comes the need for reliable means for providing a decision on the issues highlighted herein. Through the recognition that in the current context, the procedures used are based on reviews, information and records of occurrences in the field, there has been significant inadequacy and fragility in the issuing of conclusive advice or opinions. In particular, the search for mechanisms grounded in classical principles and accepted in electrical engineering presents itself as an important challenge on which to base the decision making process in full awareness of its incumbent science and technology. Therefore, with the aim of meeting these assumptions, the study in question excels in its presentation of the principles that guided the software analysis, which intend above all else to correlate cause and effect. The elaborated strategy involves modelling stages as well as studies aimed at: distribution supply reproduction; characterization of the distribution network to the complainant consumer; representation of the diverse electro-electronic appliances and lastly, a proposal for correlating the disturbances impacting on equipment with their dielectric and thermal supportability requirements. For the purpose of illustrating the software process, an actual case study coupled with a loss and claim scenario is presented.

Funding statement: Funding: Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (Grant/Award Number: 99999.010220/2014-03).

References

1. Dugan RC, Mcgranaghan MF, Santoso S, Beaty HW. Electrical power systems quality, 2nd ed. New York: McGraw-Hill, 2003.Search in Google Scholar

2. Bollen MHJ. Understanding power quality problems: voltage sags and interruptions. Piscataway: IEEE Press, 2000.Search in Google Scholar

3. Barbosa JAF, Gondim IN, Oliveira JC, Oliveira A, Tavares CE. An approach to obtain system disturbance data to consumer reimbursement analysis by real time measurements. IEEE Lat Am Trans 2013;11:719–25. DOI:10.1109/TLA.2013.6533960.:10.1109/TLA.2013.6533960Search in Google Scholar

4. Ermeler K, Pfeiffer W, Schoen D, Schocke M. Surge immunity of electronic equipment. IEEE Electr Insul Mag 1998;14:813–6.10.1109/ELMAGC.1999.801270Search in Google Scholar

5. Teixeira MD, Araújo RL, Ardjomand LM, Aoki AR, Quoirin NSR, Wunderlich I. Acceptable power quality limits to avoid damages in appliances. WSEAS Trans Circuits Syst 2005;4:479–85.Search in Google Scholar

6. Gondim IN, Rezende PHO, Oliveira JC, Macedo Junior JR, Salomão ACO, Kagan N. Reimbursement procedure due to electrical damages: the subject relevance, juridical fundamentals, agency standards, analysis procedures and trends. Renewable Energy Power Qual J 2012;10:1/6.10.24084/repqj10.546Search in Google Scholar

7. ATP. Alternative transients program (ATP) rule book. Leuven, K.U.: Leuven EMTP Center, 1987.Search in Google Scholar

8. Mendonça MVB, Oliveira JC, Tavares CE, Rodrigues KD, Gondim IN, Silva RMT. 2008. A case study of electronic device modeling and performance analysis with non ideal supply conditions using ATP simulator. In IEEE PES Transmission and Distribution Conference and Exposition. Chicago, USA, April, 21–24, 2008.10.1109/TDC.2008.4517265Search in Google Scholar

9. Rezende PHO, Oliveira JC, Gondim IN, Bacca IA. 2011. Air conditioner ATP time domain model and validation focusing requests associated to systems disturbances. In Electrical Power Quality and Utilization – EPQU. Lisboa, Portugal, October, 17–19, 2011.10.1109/EPQU.2011.6128828Search in Google Scholar

10. Mohamed A, Salem ME, Samad SA. Integrated hardware system for power quality disturbance classification. Int J Emerging Electr Power Syst 2009;10. DOI:10.2202/1553-779X.2017.:10.2202/1553-779X.2017Search in Google Scholar

11. Gondim IN, Tavares CE, Barbosa JA, Delaiba AC, Oliveira JC, Mendonça MVB. 2011. Electronic equipment dielectric and thermal withstand capability curves for refunding analysis purposes. In Electrical Power Quality and Utilization – EPQU. Lisboa, Portugal, October, 17–19, 2011.10.1109/EPQU.2011.6128812Search in Google Scholar

12. Wang J, Liew AC, Darveniza M. Extension of dynamic model of impulse behavior of concentrated grounds at high currents. IEEE Trans Power Delivery 2005;20:2160–5.10.1109/TPWRD.2004.839645Search in Google Scholar

13. Chen S-D, Chen L-H, Cheng C-K, Chen J-F. An experimental study on the electrical properties of fly ash in the grounding system. Int J Emerging Electr Power Syst 2006;7. DOI: 10.2202/1553-779X.1284.DOI: 10.2202/1553-779X.1284Search in Google Scholar

14. Sekioka S, Aiba K, Miyazaki T, Okabe S. Lightning overvoltages in low-voltage circuit for various lightning striking points. IEEE Trans Power Delivery 2010;25:3095–104. DOI: 10.1109/TPWRD.2010.2050913.: 10.1109/TPWRD.2010.2050913Search in Google Scholar

Published Online: 2015-9-16
Published in Print: 2015-12-1

©2015 by De Gruyter

Downloaded on 9.5.2026 from https://www.degruyterbrill.com/document/doi/10.1515/ijeeps-2014-0104/html?lang=en
Scroll to top button