Impact of Thermal Asymmetry on Efficiency of the Heat Recovery and Ways of Restoring Symmetry in the Flow Reversal Reactors

References

Anguil, G. 2004. “Power Generation System Utilizing Oxidized Gases from Waste Combustion.” USPTO, No: US 6,832,480 Bl.Search in Google Scholar

Balaji, S., A. Fuxman, S. Lakshminarayanan, J.F. Forbes, and R.E. Hayes. 2007. “Repetitive Model Predictive Control of a Reverse Flow Reactor.” Chemical Engineering Science 62: 2154–67.10.1016/j.ces.2006.12.082Search in Google Scholar

Budman, H., M. Kzyonsek, and P. Silverston. 1996. “Control of a Nonadiabatic Packed Bed Reactor under Periodic Flow Reversal.” Canadian Journal of Chemical Engineering 74: 751–59.10.1002/cjce.5450740527Search in Google Scholar

Burghardt, A. 2003. “Kryterium autotermiczności reaktora o periodycznie zmiennym kierunku zasilania surowcem.” Inżynieria Chemiczna i Procesowa 24: 3–18.Search in Google Scholar

Cottrell, F.G. 1938. “Purifying Gases and Apparatus Therefor”. No: US Patent No 2,121,733.Search in Google Scholar

Dufour, P., F. Couenne, and Y. Toure. 2003. “Model Predictive Control of a Catalytic Reverse Flow Reactor.” IEEE Transactions on Control Systems and Technology 11: 705–14.10.1109/TCST.2003.816408Search in Google Scholar

Edouard, D., P. Dufour, and H. Hammouri. 2005. “Observer Based Multivariable Control of a Catalytic Reverse Flow Reactor: Comparison between LQR and MPC Approaches.” Computers & Chemical Engineering 29: 851–65.10.1016/j.compchemeng.2004.09.018Search in Google Scholar

Eigenberger, G., G. Kolios, and U. Nieken. 2007. “Thermal Pattern Formation and Process Intensification in Chemical Reaction Engineering.” Chemical Engineering Sciences 62: 4825 –41.10.1016/j.ces.2007.02.039Search in Google Scholar

Frank-Kamenetski, D.A. 1969. Diffusion and Heat Transfer in Chemical Kinetics, 2nd edn. New York: Plenum Press. Enlarged.Search in Google Scholar

Gosiewski, K. 2004. “Effective Approach to Cyclic Steady State in the Catalytic Reverse-Flow Combustion of Methane.” Chemical Engineering Sciences 59: 4095 –101.10.1016/j.ces.2004.05.035Search in Google Scholar

Gosiewski, K., M. Jaschik, A. Pawlaczyk, M. Tańczyk, K. Giełzak, A. Wojdyła, T. Machej, and L. Michalski. 2011a. “Method for Utilization of Low-Concentration Gas Mixtures of Combustible Gas and Air with Stable Heat Energy Recovery and Flow Reversal Device for Implementation of the Method (A4)”. PCT, No: PCT/PL2011/000128.Search in Google Scholar

Gosiewski, K., M. Jaschik, A. Pawlaczyk, M. Tańczyk, A. Wojdyła, K. Warmuziński, and K. Giełzak. 2010. Report: Research&Development Project Grant No R14 020 02: “Thermal Coal Mine Ventilation Air Methane Combustion in a Flow Reversal Device with Heat Regeneration and Heat Recovery” (In Polish). 1–192. Gliwice: Institute of Chemical Engineering, Polish Academy of Sciences.Search in Google Scholar

Gosiewski, K., M. Jaschik, A. Pawlaczyk, K. Warmuziński, M. Tańczyk, K. Giełzak, A. Wojdyła, T. Machej, and L. Michalski. 2011b. “Sposób utylizacji niskostężonych mieszanek: Składnik palny - powietrze ze stabilnym odbiorem energii cieplnej i urządzenie rewersyjne do realizacji tego sposobu”. U.Pat. RP, No: PL 228661.Search in Google Scholar

Gosiewski, K., A. Pawlaczyk, and M. Jaschik. 2012. “Thermal Combustion of Lean Methane–Air Mixtures: Flow Reversal Research and Demonstration Reactor Model and Its Validation.” Chemical Engineering Journal 207–208: 76–84.10.1016/j.cej.2012.07.044Search in Google Scholar

Gosiewski, K., A. Pawlaczyk, and M. Jaschik. 2015. “Energy Recovery from Ventilation Air Methane via Reverse-Flow Reactors.” Energy 92: 13–23.10.1016/j.energy.2015.06.004Search in Google Scholar

Gosiewski, K., and K. Warmuzinski. 2007. “Effect of the Mode of Heat Withdrawal on the Asymmetry of Temperature Profiles in Reverse-Flow Reactors. Catalytic Combustion of Methane as a Test Case.” Chemical Engineering Science 62: 2679 –89.10.1016/j.ces.2007.02.013Search in Google Scholar

Khinast, J., A. Gurumoorthy, and D. Luss. 1998. “Complex Dynamic Features of a Cooled Reverse-Flow Reactor.” AIChE Journal 44: 1128–40.10.1002/aic.690440511Search in Google Scholar

Khinast, J., Y.O. Jeong, and D. Luss. 1999. “Dependence of Cooled Reverse-Flow Reactor Dynamics on the Model.” A.I.Ch.E. Journal 45: 299–309.10.1002/aic.690450211Search in Google Scholar

Khinast, J., and D. Luss. 1997. “Mapping Regions with Different Bifurcation Diagrams of a Reverse-Flow Reactor.” A.I.Ch.E. Journal 43: 2034–47.10.1002/aic.690430812Search in Google Scholar

Kolios, G., J. Frauhammer, and G. Eigenberger. 2000. “Review: Autothermal Fixed-Bed Reactor Concepts.” Chemical Engineering Science 55: 5945–67.10.1016/S0009-2509(00)00183-4Search in Google Scholar

Kucharczyk, B., B. Stasińska, and S. Nawrat. 2017. “Studies on Work of a Prototype Installation with Two Types of Catalytic Bed in the Reactor for Oxidation of Methane from Mine Ventilation Air.” Fuel Processing Technology 166: 8–16.10.1016/j.fuproc.2017.05.026Search in Google Scholar

Kushwaha, A., M. Poirier, R.E. Hayes, and H. Sapoundjiev. 2005. “Heat Extraction from a Flow Reversal Reactor in Lean Methane Combustion.” Transactions IChemE, PartA, Chemical Engineering Research and Design 83 (A2): 205–13.10.1205/cherd.04177Search in Google Scholar

Li, Z.K., Z.W. Wu, Z.F. Qin, H.Q. Zhu, J.B. Wu, R.Y. Wang, L.J. Lei, et al. 2017. “Demonstration of Mitigation and Utilization of Ventilation Air Methane in a Pilot Scale Catalytic Reverse Flow Reactor.” Fuel Processing Technology 160: 102–08.10.1016/j.fuproc.2017.02.030Search in Google Scholar

Matros, J.S., and D.E. Mc Combs. 1995. “Process for Stripping a Volatile Component from a Liquid”. USPTO, No: 5,451,300.Search in Google Scholar

Matros, Y.S. 1989. Catalytic Processes under Unsteady State Conditions. Amsterdam: Elsevier Science BV.Search in Google Scholar

Matros, Y.S., A.S. Noskov, V.A. Chumachenko, and O.V. Goldman. 1988. “Theory and Application of Unsteady State Detoxication of Effluent Gases from Sulfur Dioxide, Nitrogen Oxides and Organic Compounds.” Chemical Engineering Sciences 43: 2061 –66.10.1016/0009-2509(88)87084-2Search in Google Scholar

Matros, Yu. Sh., and G.A. Bunimovich. 1996. “Reverse-Flow Operation in Fixed Bed Catalytic Reactors.” Catal Reviews - Sciences Engineering 38 (1): 1–68.10.1080/01614949608006453Search in Google Scholar

Nieken, U., G. Kolios, and G. Eigenberger. 1994. “Control of the Ignited Steady State in Autothermal Fixed-Bed Reactor for Catalytic Combustion.” Chemical Engineering Sciences 49: 5507–18.10.1016/0009-2509(94)00381-5Search in Google Scholar

Nijdam, J.U., and C.W.M. van der Geld. 1997. “Experiments with a Large-Scale Reverse Flow Reactor.” Chemical Engineering Sciences 52: 2729–41.10.1016/S0009-2509(97)00094-8Search in Google Scholar

Pawlaczyk, A. 2013. Description of Homogeneous Combustion Process of Low Concentrated Methane-Air Mixtures in Monolith Bed and Assessment of Its Applicability for Modeling of the Reverse Flow Reactors. PhD Thesis, Gliwice: Institute of Chemical Engineering, Polish Academy of Sciences, 213.Search in Google Scholar

Rehacek, J., M. Kubicek, and M. Marek. 1992. “Modelling of a Tubular Catalytic Reactor with Flow Reversal.” Chemical Engineering Science 47: 2897–902.10.1016/0009-2509(92)87148-JSearch in Google Scholar

Salinger, A.G., and G. Eigenberger. 1996. “The Direct Calculations of Periodic States of the Reverse Flow Reactor – II. Multiplicity and Instability.” Chemical Engineering Sciences 51: 4915–22.10.1016/0009-2509(96)00327-2Search in Google Scholar

Seidl, P.G., M., P Bria, S., J Zagar, and A., C., H. Ruhl. 1999. “Web Dryer with Fully Integrated Regenerative Heat Source”. WIPO, No:.Search in Google Scholar

Silveston, P.L., and R.R. Hudgins. 2013. Periodic Operation of Chemical Reactors. Amsterdam - Boston - Heidelberg - London - New York - Oxford Paris - San Diego - San Francisco - Singapore - Sydney - Tokyo: Elsevier.Search in Google Scholar

Tesar, M., A. Ruhl, and S. Zagar. 2001. “Determination of Supplemental Fuel Requirement and Instantaneous Control Thereof Involving Regenerative Thermal Oxidation”. Office, E.P., No: EP 1 342 142 B1.Search in Google Scholar

Unger, J., G. Kolios, and G. Eigenberger. 1997. “On the Efficient Simulation and Analysis of Regenerative Process in Cyclic Operation.” Computation Chemical Engineering 21: S167 – S172.10.1016/S0098-1354(97)00044-6Search in Google Scholar

Wojciechowski, J., J. Janas, Z. Wysocki, and A. Rachwał. 1989. “A Method of Catalytic Combustion of Organic Compounds and A Catalytic Burner for Combustion of Organic Compounds”. Office, E.P., No: 0 337 143 B1.Search in Google Scholar

Zagoruiko, A.N. 2005. “Performance of Selective Catalytic Exothermic Reactions in the “Reversed Heat Wave” Mode: A Way to Improve Selectivity.” Chemical Engineering Journal 107: 133–39.10.1016/j.cej.2004.12.023Search in Google Scholar

Zagoruiko, A.N. 2008. “Anaerobic Catalytic Oxidation of Hydrocarbons in Moving Heat Waves. Case Simulation: Propane Oxidative Dehydrogenation in a Packed Adiabatic V–Ti Oxide Catalyst Bed.” Chemical Engineering Science 63: 4962–68.10.1016/j.ces.2008.03.002Search in Google Scholar

Zagoruiko, A.N. 2012. “The Reverse-Flow Operation of Catalytic Reactors: History and Prospects -Review.” Current Topics in Catalysis 10: 113–29.Search in Google Scholar