Optimization and Kinetics Evaluation of Bachmann Process for RDX Synthesis
-
Pandurang M. Jadhav
and
Shashikant A. Desai
Abstract
1,3,5-Trinitro-1,3,5-triazacyclohexane (RDX) is one of the high explosives extensively used for various military and civil applications. RDX is predominantly used in warheads, the most advanced solid propellants for guns and rockets and in plastic bonded explosives for improving performance characteristics. Thus the increasing demand of RDX necessitates study on reaction engineering and reactor stability in view of enhancement of safety as well as productivity. In present study, Bachmann process has been studied in detail for understanding role of reagents, time and temperature on reaction yield. Reaction rates of RDX and side products have been evaluated at various temperatures using continuous flow technique. Second order reaction was found sensitive towards temperature and concentrations of nitric acid and acetic anhydride. Higher magnitude of activation energy was evaluated for side products (25.2 kcal/mol) than RDX (18.71 kcal/mol). Optimum temperature of reaction has been obtained on profiling its progression at various reaction rates and temperature. Further, reactor stability analysis has been carried out to identify the safe operation conditions for this highly exothermic reaction. Effect of coolant flow rate and temperature as well as feed temperature has been analyzed on heat removal rate to obtain the safe regime of reaction. The information related to maximization of RDX formation and safe design of continuous process has been presented in manuscript.
Acknowledgement
Authors are grateful to Director HEMRL for providing permission to carry out work and subsequently for publication.
References
Agrawal, J.P. 2010. High energy materials: propellants, explosives and pyrotechnics. Weinheim: John Wiley & Sons.10.1002/9783527628803Search in Google Scholar
Akhavan, J. 2004. “The Chemistry of Explosives.” The Royal Society of Chemistry, UK.Search in Google Scholar
Aristoff, E., J. A. Graham, R. H. Meen, G. S. Myers, and G. F. Wright. 1949. “Nitrolysis of hexamethylenetetramine: VI. recombination of fragments during hexamethylenetetramine nitrolysis in acetic anhydride.” Canadian Journal of Research 27b (6): 520–544. doi:10.1139/cjr49b-053.Search in Google Scholar
Bachmann, W., and J. C. Sheehan. 1949. “A New Method of Preparing the High Explosive RDX.” Journal of the American Chemical Society 71 (5): 1842–1845.10.1021/ja01173a092Search in Google Scholar
Boileau, J., C. Fauquignon, B. Hueber, and H. Meyer. 2003. Explosives, Ullmanns Encyclopedia of Industrial Chemistry. New York: Wiley-Interscience.10.1002/14356007.a10_143Search in Google Scholar
Bourne, J., M. Buerli, and W. Regenass. 1981. “Heat Transfer and Power Measurements in Stirred Tanks Using Heat Flow Calorimetry.” Chemical Engineering Science 36 (2): 347–354.10.1016/0009-2509(81)85014-2Search in Google Scholar
Card, R. E., and R. Autenrieth. 1998. Treatment of HMX and RDX Contamination. TX: Amarillo National Resource Center for Plutonium Amarillo.10.2172/587711Search in Google Scholar
Castorina, T. C., and J. R. Autera. 1965. “Nitrogen-15 Tracer Studies of Nitrolysis of Hexamethylenetetramine.” Industrial & Engineering Chemistry Product Research and Development 4 (3): 170–176.10.1021/i360015a006Search in Google Scholar
Eigenberger, G., and H. Schuler. 1989. “Reactor Stability and Safe Reaction Engineering.” International Chemical Engineering 29 (1): 12–25.Search in Google Scholar
Levenspiel, O 1999. Chemical Reaction Engineering. Singapore: John Wiley & Sons.10.1021/ie990488gSearch in Google Scholar
Lewis, R. A. 2016. Hawley’s Condensed Chemical Dictionary. Hoboken, New Jersey: John Wiley & Sons.10.1002/9781119312468Search in Google Scholar
Li, X., E. Mastan, W.-J. Wang, B.-G. Li, and S. Zhu. 2016. “Progress in Reactor Engineering of Controlled Radical Polymerization: A Comprehensive Review.” Reaction Chemistry & Engineering 1 (1): 23–59.10.1039/C5RE00044KSearch in Google Scholar
Maestri, F., and R. Rota. 2016. “Kinetic-Free Safe Optimization of a Semibatch Runaway Reaction: Nitration of 4-Chloro Benzotrifluoride.” Industrial & Engineering Chemistry Research 55 (50): 12786–12794.10.1021/acs.iecr.6b03590Search in Google Scholar
Pelleter, J., and F. Renaud. 2009. “Facile, Fast and Safe Process Development of Nitration and Bromination Reactions Using Continuous Flow Reactors.” Organic Process Research & Development 13 (4): 698–705.10.1021/op8002695Search in Google Scholar
Ralph, A., J. MacHutchin, and C. Winkler. 1951. “Studies on RDX and Related Compounds: V. the Effect of Delayed Addition of Ammonium Nitrate, and the Rate of Disappearance of Hexamine, in the Bachmann Reaction.” Canadian Journal of Chemistry 29 (9): 725–730.10.1139/v51-083Search in Google Scholar
Rosenberg, D. E. 1971. Stability Analysis of a Continuous Stirred Tank Reactor with an Autocatalytic Reaction. Doctoral dissertation, Newark College of Engineering.Search in Google Scholar
Türker, L. 2015. “RDX and HMX Formations from Hexamine-A DFT Based Postulate.” Annals of West University of Timisoara. Series of Chemistry 24 (1): 37.Search in Google Scholar
Upadhyay, S. K. 2007. Chemical Kinetics and Reaction Dynamics. New York, USA: Springer Science & Business Media.Search in Google Scholar
Urbanski, T. 1965. Chemistry and technology of explosives. Vol. 2. New York: Pergamon Press.Search in Google Scholar
Westerterp, K. 1962. “Maximum Allowable Temperatures in Chemical Reactors.” Chemical Engineering Science 17 (6): 423–433.10.1016/0009-2509(62)85011-8Search in Google Scholar
Williams, H., and C. Winkler. 1951. “Studies on RDX and Related Compounds: Iv. the Bachmann or Combination Process.” Canadian Journal of Chemistry 29 (8): 642–645.10.1139/v51-072Search in Google Scholar
© 2017 Walter de Gruyter GmbH, Berlin/Boston
Articles in the same Issue
- Application of NaA Membrane Reactor for Methanol Synthesis in CO2 Hydrogenation at Low Pressure
- Bubble Force Balance Formula for Low Reynolds Number Bubbly Flows in Pipes and Channels: Comparison of Wall Force Models
- Optimization and Kinetics Evaluation of Bachmann Process for RDX Synthesis
- A Comparative Study of the Activity of TiO2 Degussa P25 and Millennium PCs in the Photocatalytic Degradation of Bromothymol Blue
- Bed Material Agglomeration Behavior in a Bubbling Fluidized Bed (BFB) at High Temperatures using KCl and K2SO4 as Simulated Molten Ash
- Chemical Reaction Effects on Nano Carreau Liquid Flow Past a Cone and a Wedge with Cattaneo-Christov Heat Flux Model
- Bayesian Deconvolution of Vessel Residence Time Distribution
- Characterization and Catalytic Reactivity of LaNi1-xMgxO3-δ Perovskite Oxides in Reforming of Methane with CO2 and O2
- The Reducibility and Cluster Size of Vanadium Oxide as Potential Descriptors of Its Catalytic Activity in the Partial Oxidation of Ethanol
- Homotopy Continuation Method to Evaluate Catalytic Rates for Highly Exothermic Reaction Systems
Articles in the same Issue
- Application of NaA Membrane Reactor for Methanol Synthesis in CO2 Hydrogenation at Low Pressure
- Bubble Force Balance Formula for Low Reynolds Number Bubbly Flows in Pipes and Channels: Comparison of Wall Force Models
- Optimization and Kinetics Evaluation of Bachmann Process for RDX Synthesis
- A Comparative Study of the Activity of TiO2 Degussa P25 and Millennium PCs in the Photocatalytic Degradation of Bromothymol Blue
- Bed Material Agglomeration Behavior in a Bubbling Fluidized Bed (BFB) at High Temperatures using KCl and K2SO4 as Simulated Molten Ash
- Chemical Reaction Effects on Nano Carreau Liquid Flow Past a Cone and a Wedge with Cattaneo-Christov Heat Flux Model
- Bayesian Deconvolution of Vessel Residence Time Distribution
- Characterization and Catalytic Reactivity of LaNi1-xMgxO3-δ Perovskite Oxides in Reforming of Methane with CO2 and O2
- The Reducibility and Cluster Size of Vanadium Oxide as Potential Descriptors of Its Catalytic Activity in the Partial Oxidation of Ethanol
- Homotopy Continuation Method to Evaluate Catalytic Rates for Highly Exothermic Reaction Systems
