Article
Open Access
Reduction Behavior of SiCl4 During its Aluminothermic Reduction
-
Tadatoshi Kawabe,
Published/Copyright:
February 11, 2012
Published Online: 2012-02-11
Published in Print: 2011-08
©2012 by Walter de Gruyter GmbH & Co.
Articles in the same Issue
- Prelims
- A Special Issue in Memory of Professor Dr. Akira Yazawa on “Materials Chemistry: Thermodynamics and Processing”
- A Memorial Address for Professor Akira Yazawa
- Oxidation Mechanism of Cu2O and Defect Structure of CuO at High Temperatures
- Fiber-reinforced Yttria Partially Stabilized Zirconia Thermal Barrier Coatings Processed by Sol-gel Method
- Molecular Dynamics Modelling of Liquid Fe-C Alloys
- Synthesis of Large Porous Particles of Iron Oxide and Their Arsenic Adsorption Characteristics in Aqueous Solution
- Estimation of a Slip Velocity on a SuperhydrophobicWall Surface in a Laminar Pipe Flow
- Recoveries of Metallic Indium and Tin from ITO by Means of Pyrometallurgy
- Chlorination and Evaporation Behaviors of Zinc Oxide in Ar- HCl-O2 Atmosphere
- Effect of Al2O3 or MgO on Liquidus Line in the FeOX Corner of FeOX-SiO2-CaO System at 1523 K under Various Oxygen Partial Pressures
- Hydrolysis Rate of Aluminum Nitride in a Sodium Hydroxide Solution
- Anion-exchange Behavior of Mo(V) and W(VI) in HCl Solutions
- Vitrification Treatment of Asbestos Waste with Incineration Ash of Solid Waste
- Alternative Method for Pyrometallurgical Recycling of EAF Dust Using Plastic Waste Containing Tetrabromobisphenol A
- Production of Silicon-based Nano-scale Materials Through High Temperature Reduction of Silica by Titanium
- Formation of Carbonaceous Materials by Ultrasonic Atomization of Aqueous Ethanol Solution and Pyrolysis Treatment
- Reduction Behavior of SiCl4 During its Aluminothermic Reduction
- Thermodynamic Analysis of the Cu-Sn-P Ternary System
- Viscosity Estimation of Spherical Particles Dispersed Suspension
- Aluminum Subhalide as a Reductant for Metallothermic Reduction
- Novel Recycling Process of Mn by Sulfurization of Molten Slag from a By-Product of Steelmaking Process
- Preparation and Properties of Trivalent Titanium Compounds, TiCl3 and TiOCl
- Lead Solubility in FeOx-CaO-SiO2-NaO0:5 and FeOx-CaO-SiO2-CrO1:5 Slags under Iron Saturation at 1573 K
- Formation of CaSO4 in the CaO-FeOx-Cu2O Slags
- Thermodynamics of Cathodic ZnTe Electrodeposition Using Basic Ammoniacal Electrolytes: Why CdTe Can Deposit While ZnTe Cannot
- Thermodynamic Data for Mn3O4, Mn2O3 and MnO2
- Crystallization of the Amorphous Ferric Arsenate in the Saturated Steam Atmosphere
- TiAl3 Coating on Ti Substrate by Al Electrodeposition from DMSO2 Bath and Annealing
- Phase Relations of Ferrous Calcium Silicate Slag and its Possible Application in the Industrial Practice
- Application of the Levitation Technique for Investigation of Metal Alloys and Phase Equilibria in Slags
- Influence of Nitrogen on the Notch Sensitivity of 316LN Stainless Steel During Tensile Deformation
Creative Commons
BY-NC-ND 3.0
Articles in the same Issue
- Prelims
- A Special Issue in Memory of Professor Dr. Akira Yazawa on “Materials Chemistry: Thermodynamics and Processing”
- A Memorial Address for Professor Akira Yazawa
- Oxidation Mechanism of Cu2O and Defect Structure of CuO at High Temperatures
- Fiber-reinforced Yttria Partially Stabilized Zirconia Thermal Barrier Coatings Processed by Sol-gel Method
- Molecular Dynamics Modelling of Liquid Fe-C Alloys
- Synthesis of Large Porous Particles of Iron Oxide and Their Arsenic Adsorption Characteristics in Aqueous Solution
- Estimation of a Slip Velocity on a SuperhydrophobicWall Surface in a Laminar Pipe Flow
- Recoveries of Metallic Indium and Tin from ITO by Means of Pyrometallurgy
- Chlorination and Evaporation Behaviors of Zinc Oxide in Ar- HCl-O2 Atmosphere
- Effect of Al2O3 or MgO on Liquidus Line in the FeOX Corner of FeOX-SiO2-CaO System at 1523 K under Various Oxygen Partial Pressures
- Hydrolysis Rate of Aluminum Nitride in a Sodium Hydroxide Solution
- Anion-exchange Behavior of Mo(V) and W(VI) in HCl Solutions
- Vitrification Treatment of Asbestos Waste with Incineration Ash of Solid Waste
- Alternative Method for Pyrometallurgical Recycling of EAF Dust Using Plastic Waste Containing Tetrabromobisphenol A
- Production of Silicon-based Nano-scale Materials Through High Temperature Reduction of Silica by Titanium
- Formation of Carbonaceous Materials by Ultrasonic Atomization of Aqueous Ethanol Solution and Pyrolysis Treatment
- Reduction Behavior of SiCl4 During its Aluminothermic Reduction
- Thermodynamic Analysis of the Cu-Sn-P Ternary System
- Viscosity Estimation of Spherical Particles Dispersed Suspension
- Aluminum Subhalide as a Reductant for Metallothermic Reduction
- Novel Recycling Process of Mn by Sulfurization of Molten Slag from a By-Product of Steelmaking Process
- Preparation and Properties of Trivalent Titanium Compounds, TiCl3 and TiOCl
- Lead Solubility in FeOx-CaO-SiO2-NaO0:5 and FeOx-CaO-SiO2-CrO1:5 Slags under Iron Saturation at 1573 K
- Formation of CaSO4 in the CaO-FeOx-Cu2O Slags
- Thermodynamics of Cathodic ZnTe Electrodeposition Using Basic Ammoniacal Electrolytes: Why CdTe Can Deposit While ZnTe Cannot
- Thermodynamic Data for Mn3O4, Mn2O3 and MnO2
- Crystallization of the Amorphous Ferric Arsenate in the Saturated Steam Atmosphere
- TiAl3 Coating on Ti Substrate by Al Electrodeposition from DMSO2 Bath and Annealing
- Phase Relations of Ferrous Calcium Silicate Slag and its Possible Application in the Industrial Practice
- Application of the Levitation Technique for Investigation of Metal Alloys and Phase Equilibria in Slags
- Influence of Nitrogen on the Notch Sensitivity of 316LN Stainless Steel During Tensile Deformation