Article
Publicly Available
Masthead
Published/Copyright:
June 15, 2013
Published Online: 2013-06-15
Published in Print: 2013-06-14
©[2013] by Walter de Gruyter Berlin Boston
Articles in the same Issue
- Masthead
- The Ninth International Conference on Molten Slags, Fluxes and Salts (MOLTEN 12), May 27–30, 2012 in Beijing, China
- Activity of Lead in Copper Matte at Very Low Lead Concentration
- A Thermodynamic Model for Evaluation of Mass Action Concentrations of Ce2O3-contained Slag Systems Based on the Ion and Molecule Coexistence Theory
- Modeling Activity and Interaction Coefficients of Components of Multicomponent Alloy Melts: An Example of Iron Melt
- Thermodynamic Modeling of the CaO-SiO2-M2O (M=K,Na) Systems
- Kinetics of Reduction of Titano-magnetite Powder by H2
- Thermodynamic Modelling of Phosphorus in Steelmaking Slags
- Thermodynamic Database of P2O5-containing Oxide Systems for the Dephosphorization Process in Steelmaking
- Rate and Mechanism of Reduction-Dissolution of Chromite in Liquid Slags
- Study on Structure Characteristics of B2O3 and TiO2-bearing F-Free Mold Flux by Raman Spectroscopy
- Effect of Water-Vapor Content on Reaction Rate of Hexagonal BN Powder at 1273 K
- Liquidus Temperature of Mould Fluxes in Casting of Ti-stablized Stainless Steel
- Unified Tensile Work Hardening Behaviour of Thin Section Plate and Forged Thick Section 9Cr-1Mo Ferritic Steel
- Interactions between TiAl Alloy and Different Oxide Moulds under High-temperature and Long-time Condition
- Investigation on Preparation of Micro-Sized Hematite Powder from Hydrous Ferrous Sulfate Using Microwave and Conventional Heating
- Mechanical Properties of the Directionally Solidified Ceramic Eutectic of Al2O3/Al16Ti5O34 Phase Structure
- Hot Corrosion of Co-based Alloys with 25%NaCl+75%Na2SO4 Coating at 1173 K
- Effect of Aluminum on the Nucleation of Intragranular Ferrite in Ti-Added Carbon Structural Steel
Articles in the same Issue
- Masthead
- The Ninth International Conference on Molten Slags, Fluxes and Salts (MOLTEN 12), May 27–30, 2012 in Beijing, China
- Activity of Lead in Copper Matte at Very Low Lead Concentration
- A Thermodynamic Model for Evaluation of Mass Action Concentrations of Ce2O3-contained Slag Systems Based on the Ion and Molecule Coexistence Theory
- Modeling Activity and Interaction Coefficients of Components of Multicomponent Alloy Melts: An Example of Iron Melt
- Thermodynamic Modeling of the CaO-SiO2-M2O (M=K,Na) Systems
- Kinetics of Reduction of Titano-magnetite Powder by H2
- Thermodynamic Modelling of Phosphorus in Steelmaking Slags
- Thermodynamic Database of P2O5-containing Oxide Systems for the Dephosphorization Process in Steelmaking
- Rate and Mechanism of Reduction-Dissolution of Chromite in Liquid Slags
- Study on Structure Characteristics of B2O3 and TiO2-bearing F-Free Mold Flux by Raman Spectroscopy
- Effect of Water-Vapor Content on Reaction Rate of Hexagonal BN Powder at 1273 K
- Liquidus Temperature of Mould Fluxes in Casting of Ti-stablized Stainless Steel
- Unified Tensile Work Hardening Behaviour of Thin Section Plate and Forged Thick Section 9Cr-1Mo Ferritic Steel
- Interactions between TiAl Alloy and Different Oxide Moulds under High-temperature and Long-time Condition
- Investigation on Preparation of Micro-Sized Hematite Powder from Hydrous Ferrous Sulfate Using Microwave and Conventional Heating
- Mechanical Properties of the Directionally Solidified Ceramic Eutectic of Al2O3/Al16Ti5O34 Phase Structure
- Hot Corrosion of Co-based Alloys with 25%NaCl+75%Na2SO4 Coating at 1173 K
- Effect of Aluminum on the Nucleation of Intragranular Ferrite in Ti-Added Carbon Structural Steel