Received: 2013-12-26
Accepted: 2014-3-12
Published Online: 2014-5-14
Published in Print: 2015-2-1
©2015 by De Gruyter
Articles in the same Issue
- Frontmatter
- A Simple Kinetic Model for the Growth of Fe2B Layers on AISI 1026 Steel During the Powder-pack Boriding
- Influence of Copper on the Hot Ductility of 20CrMnTi Steel
- Effect of Tin, Copper and Boron on the Hot Ductility of 20CrMnTi Steel between 650 °C and 1100 °C
- Study of the Effects of High Temperatures on the Engineering Properties of Steel 42CrMo4
- Characterization and Oxidation Behaviour of Al2O3 Coating Deposited on Ti-Al-Nb Alloy in Air and in 9%O2 + 0.2%HCl + 0.08%SO2 + N2 Atmosphere
- Effect of Cooling Rate on Boron Removal and Solidification Behavior of Al-Si Alloy
- The Major and Minor Relaxations in Polymeric Ni-Zn-Cu-Co Complex Nanocomposite Systems
- Assessment of Super-gravity Concentrating V-containing Spinel Phase from Vanadium Slag
- Phosphate Capacities of CaF2-MgO and CaF2-CaO-MgO Slags
- Temperature Dependence of Thermodynamic Properties of Thallium Chloride and Thallium Bromide
- Prediction of High Temperature Flow Stress of Alloy 2618-Ti during Hot Deformation
- Thermodynamic Modeling of CaO-CaF2 and CaO-SiO2 Systems
- Effects of Bath Depth and Eccentricity on Mixing Phenomena in Shaking Ladle
Keywords for this article
centrifugal concentration;
V-containing spinel phase;
vanadium slag;
super gravity;
V-containing spinel particles;
gravity coefficient
Creative Commons
BY-NC-ND 3.0
Articles in the same Issue
- Frontmatter
- A Simple Kinetic Model for the Growth of Fe2B Layers on AISI 1026 Steel During the Powder-pack Boriding
- Influence of Copper on the Hot Ductility of 20CrMnTi Steel
- Effect of Tin, Copper and Boron on the Hot Ductility of 20CrMnTi Steel between 650 °C and 1100 °C
- Study of the Effects of High Temperatures on the Engineering Properties of Steel 42CrMo4
- Characterization and Oxidation Behaviour of Al2O3 Coating Deposited on Ti-Al-Nb Alloy in Air and in 9%O2 + 0.2%HCl + 0.08%SO2 + N2 Atmosphere
- Effect of Cooling Rate on Boron Removal and Solidification Behavior of Al-Si Alloy
- The Major and Minor Relaxations in Polymeric Ni-Zn-Cu-Co Complex Nanocomposite Systems
- Assessment of Super-gravity Concentrating V-containing Spinel Phase from Vanadium Slag
- Phosphate Capacities of CaF2-MgO and CaF2-CaO-MgO Slags
- Temperature Dependence of Thermodynamic Properties of Thallium Chloride and Thallium Bromide
- Prediction of High Temperature Flow Stress of Alloy 2618-Ti during Hot Deformation
- Thermodynamic Modeling of CaO-CaF2 and CaO-SiO2 Systems
- Effects of Bath Depth and Eccentricity on Mixing Phenomena in Shaking Ladle