Artikel
Lizenziert
Nicht lizenziert
Erfordert eine Authentifizierung
The effect of galactan content on the mechano-sorptive strain in loblolly pine
-
Kenneth Entwistle
und
Shakti Chauhan
Veröffentlicht/Copyright:
7. Februar 2011
Abstract
Mechano-sorptive (MS) strains were measured in torsion on eight loblolly pine specimens as a function of galactan content. The strains were generated by an increase of environmental humidity from 38% to 84% and were measured during an anticlockwise and a clockwise loading scheme that caused the specimen to recover its original dimensions at the end of the test. The magnitude of the MS strains was found to be independent of galactan concentration. The specimens with high and low galactan contents had different MS strains but the average of the measured data was the same. The number of observations (eight) was too small for a reliable statistical analysis to identify the regressors that are the main sources of the strain variations. The cell structure of the specimens was visualised by X-ray tomography.
Keywords: galactan; hydrogen bonding; loblolly pine; longitudinal shrinkage; mechano-sorptive strain; X-ray tomography
Received: 2010-4-12
Accepted: 2010-11-11
Published Online: 2011-02-07
Published Online: 2011-02-07
Published in Print: 2011-05-01
©2011 by Walter de Gruyter Berlin New York
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Artikel in diesem Heft
- Publisher’s Note
- Publisher’s Note
- ORIGINAL ARTICLES
- Brightness reversion of eucalyptus kraft pulp: Effect of carbonyl groups generated by hypochlorous acid oxidation
- MgSO4 vs. Mg(OH)2 as a cellulose protector in oxygen delignification
- Hydrogen peroxide and supercritical carbon dioxide: a new bleaching stage for Eucalyptus kraft-O2 pulps
- Preparation and physical characterization of strongly swellable oligo(oxyethylene) lignin hydrogels
- Activation of pine kraft lignin by Fenton-type oxidation for cross-linking with oligo(oxyethylene) diglycidyl ether
- Determination of pectin content of eucalyptus wood
- Theory of transport processes in wood below the fiber saturation point. Physical background on the microscale and its macroscopic description
- The effect of galactan content on the mechano-sorptive strain in loblolly pine
- Genetic and environmental variation in heartwood colour of Australian blackwood (Acacia melanoxylon R.Br.)
- Aging of wood: Analysis of color changes during natural aging and heat treatment
- Thermal behaviour of Norway spruce and European beech in and between the principal anatomical directions
- Air-coupled ultrasound inspection of glued laminated timber
- Optical characteristics of wood investigated by time-of-flight near infrared spectroscopy
- Comparison of NDE techniques for assessing mechanical properties of unjointed and finger-jointed lumber
- Potential of pulp and paper sludge as a formaldehyde scavenger agent in MDF resins
- FT-IR imaging microscopy to localise and characterise simultaneous and selective white-rot decay within spruce wood cells
- Effects of ionic strength, monoethanolamine, copper, and pH on adsorption of alkyl dimethyl benzyl ammonium chloride in wood
- Long-term performance of fused borate rods for limiting internal decay in Douglas-fir utility poles
- SHORT NOTE
- Composition of the heartwood essential oil of incense cedar (Calocedrus decurrens Torr.)
- Meetings
- Meetings
Schlagwörter für diesen Artikel
galactan;
hydrogen bonding;
loblolly pine;
longitudinal shrinkage;
mechano-sorptive strain;
X-ray tomography
Artikel in diesem Heft
- Publisher’s Note
- Publisher’s Note
- ORIGINAL ARTICLES
- Brightness reversion of eucalyptus kraft pulp: Effect of carbonyl groups generated by hypochlorous acid oxidation
- MgSO4 vs. Mg(OH)2 as a cellulose protector in oxygen delignification
- Hydrogen peroxide and supercritical carbon dioxide: a new bleaching stage for Eucalyptus kraft-O2 pulps
- Preparation and physical characterization of strongly swellable oligo(oxyethylene) lignin hydrogels
- Activation of pine kraft lignin by Fenton-type oxidation for cross-linking with oligo(oxyethylene) diglycidyl ether
- Determination of pectin content of eucalyptus wood
- Theory of transport processes in wood below the fiber saturation point. Physical background on the microscale and its macroscopic description
- The effect of galactan content on the mechano-sorptive strain in loblolly pine
- Genetic and environmental variation in heartwood colour of Australian blackwood (Acacia melanoxylon R.Br.)
- Aging of wood: Analysis of color changes during natural aging and heat treatment
- Thermal behaviour of Norway spruce and European beech in and between the principal anatomical directions
- Air-coupled ultrasound inspection of glued laminated timber
- Optical characteristics of wood investigated by time-of-flight near infrared spectroscopy
- Comparison of NDE techniques for assessing mechanical properties of unjointed and finger-jointed lumber
- Potential of pulp and paper sludge as a formaldehyde scavenger agent in MDF resins
- FT-IR imaging microscopy to localise and characterise simultaneous and selective white-rot decay within spruce wood cells
- Effects of ionic strength, monoethanolamine, copper, and pH on adsorption of alkyl dimethyl benzyl ammonium chloride in wood
- Long-term performance of fused borate rods for limiting internal decay in Douglas-fir utility poles
- SHORT NOTE
- Composition of the heartwood essential oil of incense cedar (Calocedrus decurrens Torr.)
- Meetings
- Meetings
