New model for predicting tensile strength and density of eucalyptus handsheets based on an activation parameter calculated from fiber distribution characteristics
-
Iiro Pulkkinen
Abstract
The activation parameter developed is based on the fiber wall thickness distribution, fiber curl distribution, and water retention value of the unrefined fibers. The mechanical properties of paper that contain chemical pulp depend, among other things, on the free fiber segment activation between fiber-fiber crossings that is created during drying. Experimental data revealed that the degree of fiber swelling is responsible together with the fiber shape factor (curl) and fiber wall thickness for the extent of fiber network activation. The amount of bonding between fibers also affects fiber segment activation. Based on the experimental data, it was deduced that interfiber bonding ability of fibers, characterized as the water retention value, was mainly responsible for the development of handsheet density. Tensile index development was more affected by the morphology of fibers, which was the main determinant for high activation potential of fibers. Factor analysis was used to identify the main causes of variation for a refining data set of 20 Eucalyptus grandis samples. Three independent descriptors were found to be responsible for the majority of the variation: the bonding and activation factor, the factor of microcompressions, and the factor of fiber wall thickness and fiber curl. The activation parameter developed in this study can be used to determine the effect of fiber segment activation and inter-fiber bonding on the inplane mechanical properties of paper.
©2010 by Walter de Gruyter Berlin New York
Articles in the same Issue
- Original Papers
- Recombinant manganese peroxidase (rMnP) from Pichia pastoris. Part 1: Kraft pulp delignification
- Recombinant manganese peroxidase (rMnP) from Pichia pastoris. Part 2: Application in TCF and ECF bleaching
- The role of hydroxyl and oxyl anion radicals in selectivity of oxygen delignification
- Thermal aging of 1-alkyl-3-methylimidazolium ionic liquids and its effect on dissolved cellulose
- Synchrotron X-ray fiber diffraction study on the thermal expansion behavior of cellulose crystals in tension wood of Japanese poplar in the low-temperature region
- Studies on the dehydrogenative polymerization of monolignol β-glycosides. Part 6: Monitoring of horseradish peroxidase-catalyzed polymerization of monolignol glycosides by GPC-PDA
- Reactivity of syringyl quinone methide intermediates in dehydrogenative polymerization. Part 2: pH effect in horseradish peroxidase-catalyzed polymerization of sinapyl alcohol
- Fractionation, analysis, and PCA modeling of properties of four technical lignins for prediction of their application potential in binders
- New model for predicting tensile strength and density of eucalyptus handsheets based on an activation parameter calculated from fiber distribution characteristics
- Extractives of the tropical wood wallaba (Eperua falcata Aubl.) as natural anti-swelling agents
- Surface properties of extracts from cork black condensate
- Effect of helium DBD plasma treatment on the surface of wood samples
- Preparation of thermoplastic molding from steamed Japanese beech flour
- Alteration of the unsteady sorption behaviour of maple (Acer pseudoplatanus L.) and spruce (Picea abies (L.) Karst.) due to thermal modification
- Towards improved understanding of PEG-impregnated waterlogged archaeological wood: A model study on recent oak
- Determination of the change in appearance of lumber surfaces illuminated from various directions
- A study of water exchange in wood by means of 2D NMR relaxation correlation and exchange
- Measurement of surface growth stress in Eucalyptus nitens Maiden by splitting a log along its axis
- Obituary
- Dion Chen-Loung Chen (1930–2009)
- Meetings
- Meetings
Articles in the same Issue
- Original Papers
- Recombinant manganese peroxidase (rMnP) from Pichia pastoris. Part 1: Kraft pulp delignification
- Recombinant manganese peroxidase (rMnP) from Pichia pastoris. Part 2: Application in TCF and ECF bleaching
- The role of hydroxyl and oxyl anion radicals in selectivity of oxygen delignification
- Thermal aging of 1-alkyl-3-methylimidazolium ionic liquids and its effect on dissolved cellulose
- Synchrotron X-ray fiber diffraction study on the thermal expansion behavior of cellulose crystals in tension wood of Japanese poplar in the low-temperature region
- Studies on the dehydrogenative polymerization of monolignol β-glycosides. Part 6: Monitoring of horseradish peroxidase-catalyzed polymerization of monolignol glycosides by GPC-PDA
- Reactivity of syringyl quinone methide intermediates in dehydrogenative polymerization. Part 2: pH effect in horseradish peroxidase-catalyzed polymerization of sinapyl alcohol
- Fractionation, analysis, and PCA modeling of properties of four technical lignins for prediction of their application potential in binders
- New model for predicting tensile strength and density of eucalyptus handsheets based on an activation parameter calculated from fiber distribution characteristics
- Extractives of the tropical wood wallaba (Eperua falcata Aubl.) as natural anti-swelling agents
- Surface properties of extracts from cork black condensate
- Effect of helium DBD plasma treatment on the surface of wood samples
- Preparation of thermoplastic molding from steamed Japanese beech flour
- Alteration of the unsteady sorption behaviour of maple (Acer pseudoplatanus L.) and spruce (Picea abies (L.) Karst.) due to thermal modification
- Towards improved understanding of PEG-impregnated waterlogged archaeological wood: A model study on recent oak
- Determination of the change in appearance of lumber surfaces illuminated from various directions
- A study of water exchange in wood by means of 2D NMR relaxation correlation and exchange
- Measurement of surface growth stress in Eucalyptus nitens Maiden by splitting a log along its axis
- Obituary
- Dion Chen-Loung Chen (1930–2009)
- Meetings
- Meetings
