Skip to main content
Article Publicly Available

Frontmatter

Published/Copyright: May 9, 2022
Download Article (PDF)
Holzforschung
From the journal Holzforschung Volume 76 Issue 5

Published Online: 2022-05-09
Published in Print: 2022-05-25

©2022 Walter de Gruyter GmbH, Berlin/Boston

Articles in the same Issue

  1. Frontmatter
  2. Original Articles
  3. Tensile strength grading of beech (Fagus sylvatica L.) lamellas from multiple origins, cross sections and qualities
  4. Studying the spatio-temporal dynamics of wood decay with X-ray CT scanning
  5. Influence of number and position of measuring points on the nondestructive testing method to predict the flexural modulus of aged wood
  6. Distribution of cadmium accumulated in the wood cells of poplar
  7. Wood-water interactions of thermally modified, acetylated and melamine formaldehyde resin impregnated beech wood
  8. Analysis of micro-morphology, mechanical properties, and dimensional stability of densified faber fir infused with paraffin
  9. The impact of sulphonation and hot-pressing on low-energy high-temperature chemi-thermomechanical pulp
  10. Conversion of bleached soda bagasse paper-grade pulp to dissolving-grade pulp using different hemicelluloses removing post-treatments with emphasis on IONCELL-P process
https://doi.org/10.1515/hf-2022-frontmatter5

Articles in the same Issue

  1. Frontmatter
  2. Original Articles
  3. Tensile strength grading of beech (Fagus sylvatica L.) lamellas from multiple origins, cross sections and qualities
  4. Studying the spatio-temporal dynamics of wood decay with X-ray CT scanning
  5. Influence of number and position of measuring points on the nondestructive testing method to predict the flexural modulus of aged wood
  6. Distribution of cadmium accumulated in the wood cells of poplar
  7. Wood-water interactions of thermally modified, acetylated and melamine formaldehyde resin impregnated beech wood
  8. Analysis of micro-morphology, mechanical properties, and dimensional stability of densified faber fir infused with paraffin
  9. The impact of sulphonation and hot-pressing on low-energy high-temperature chemi-thermomechanical pulp
  10. Conversion of bleached soda bagasse paper-grade pulp to dissolving-grade pulp using different hemicelluloses removing post-treatments with emphasis on IONCELL-P process
Downloaded on 30.4.2026 from https://www.degruyterbrill.com/document/doi/10.1515/hf-2022-frontmatter5/html?lang=en
Scroll to top button