Article Publicly Available

Erratum to: Standard and non-standard deformation behaviour of European beech and Norway spruce during compression

This erratum corrects the original online version which can be found here: https://doi.org/10.1515/hf-2014-0231
  • EMAIL logo , , , and
Published/Copyright: March 19, 2016
Download Article (PDF)
Holzforschung
From the journal Holzforschung Volume 70 Issue 4

Erratum to: Martin Brabec, Jan Tippner, Václav Sebera, Jaromír Milch, and Peter Rademacher. 2015. Standard and non-standard deformation behaviour of European beech and Norway spruce during compression. Holzforschung. Volume 69, Issue 9, pages 1107–1116. (DOI 10.1515/hf-2014-0231):

The paper from Čermák et al. in the reference list on page 115 is wrongly quoted. It only showed the information for the version ahead of print. For the reader’s convenience, the corrected reference appears below.

Čermák, P., Horáček, P., Rademacher, P. (2014) Measured temperature and moisture profiles during thermal modification of beech (Fagus sylvatica L.) and spruce (Picea abies L. Karst.) wood. Holzforschung 68:175–183.

Corresponding author: Martin Brabec, Faculty of Forestry and Wood Technology, Department of Wood Science, Mendel University in Brno, Zemědělská 3, 613 00 Brno, Czech Republic, Phone: +420 545 134 545, e-mail:
Published Online: 2016-3-19
Published in Print: 2016-4-1

©2016 by De Gruyter

Articles in the same Issue

  1. Frontmatter
  2. Original Articles
  3. Ferulates and lignin structural composition in cork
  4. Comparison of pulp species in IONCELL-P: selective hemicellulose extraction method with ionic liquids
  5. A novel and highly efficient polymerization of sulfomethylated alkaline lignins via alkyl chain cross-linking method
  6. Curing of wood treated with vinyl acetate-epoxidized linseed oil copolymer (VAc-ELO)
  7. Screening of juvenile Pinus radiata wood by means of Py-GC/MS for compression wood focussing on the ratios of p-hydroxyphenyl to guaiacyl units (H/G ratios)
  8. Characterization of adhesive penetration in wood bond by means of scanning thermal microscopy (SThM)
  9. Critical moisture conditions for fungal decay of modified wood by basidiomycetes as detected by pile tests
  10. Synthesis of fire retardants based on N and P and poly(sodium silicate-aluminum dihydrogen phosphate) (PSADP) and testing the flame-retardant properties of PSADP impregnated poplar wood
  11. Monitoring electrical properties of thermally modified wood as a possible tool for quality assessment
  12. Formation and properties of polyelectrolytes/TiO2 composite coating on wood surfaces through layer-by-layer assembly method
  13. The effect of temperature and moisture content on the fracture behaviour of spruce and birch
  14. A three-dimensional void reconstruction method for analyzing fractal dimensions of void volume in wood-strand composites
  15. Erratum
  16. Erratum to: Standard and non-standard deformation behaviour of European beech and Norway spruce during compression
https://doi.org/10.1515/hf-2016-1001

Articles in the same Issue

  1. Frontmatter
  2. Original Articles
  3. Ferulates and lignin structural composition in cork
  4. Comparison of pulp species in IONCELL-P: selective hemicellulose extraction method with ionic liquids
  5. A novel and highly efficient polymerization of sulfomethylated alkaline lignins via alkyl chain cross-linking method
  6. Curing of wood treated with vinyl acetate-epoxidized linseed oil copolymer (VAc-ELO)
  7. Screening of juvenile Pinus radiata wood by means of Py-GC/MS for compression wood focussing on the ratios of p-hydroxyphenyl to guaiacyl units (H/G ratios)
  8. Characterization of adhesive penetration in wood bond by means of scanning thermal microscopy (SThM)
  9. Critical moisture conditions for fungal decay of modified wood by basidiomycetes as detected by pile tests
  10. Synthesis of fire retardants based on N and P and poly(sodium silicate-aluminum dihydrogen phosphate) (PSADP) and testing the flame-retardant properties of PSADP impregnated poplar wood
  11. Monitoring electrical properties of thermally modified wood as a possible tool for quality assessment
  12. Formation and properties of polyelectrolytes/TiO2 composite coating on wood surfaces through layer-by-layer assembly method
  13. The effect of temperature and moisture content on the fracture behaviour of spruce and birch
  14. A three-dimensional void reconstruction method for analyzing fractal dimensions of void volume in wood-strand composites
  15. Erratum
  16. Erratum to: Standard and non-standard deformation behaviour of European beech and Norway spruce during compression
Downloaded on 14.4.2026 from https://www.degruyterbrill.com/document/doi/10.1515/hf-2016-1001/html
Scroll to top button