Article
Licensed
Unlicensed
Requires Authentication
Meetings
Published/Copyright:
January 29, 2014
Published Online: 2014-01-29
Published in Print: 2014-02-01
©2014 by Walter de Gruyter Berlin Boston
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Masthead
- Masthead
- Review
- Mode of action of brown rot decay resistance in modified wood: a review
- Original Articles
- Photoyellowing of chemically modified chemithermomechanical pulps (CTMP) from Eucalyptus globulus under various atmospheres
- Selective purification of bleached spruce TMP process water by induced air flotation (IAF)
- Evaluation of the effects of compression combined with heat treatment by nanoindentation (NI) of poplar cell walls
- Measured temperature and moisture profiles during thermal modification of beech (Fagus sylvatica L.) and spruce (Picea abies L. Karst.) wood
- Modeling the influence of thermal modification on the electrical conductivity of wood
- Spruce fiber properties after high-temperature thermomechanical pulping (HT-TMP)
- Efficiency of visual strength grading of timber with respect to origin, species, cross section, and grading rules: a critical evaluation of the common standards
- Synthesis of alcohol-soluble phenol-formaldehyde resins from pyrolysis oil of Cunninghamia lanceolata wood and properties of molding plates made of resin-impregnated materials
- Enzymatic strategies to improve removal of hexenuronic acids and lignin from cellulosic fibers
- Phylogenetic analysis of major molds inhabiting woods. Part 4. Genus Alternaria
- Short Notes
- Comparison of hydrogenolysis with thioacidolysis for lignin structural analysis
- Detection of complex vascular system in bamboo node by X-ray μCT imaging technique
- Obituary
- Professor Gösta Brunow (1936–2013)
- Meetings
- Meetings
Articles in the same Issue
- Masthead
- Masthead
- Review
- Mode of action of brown rot decay resistance in modified wood: a review
- Original Articles
- Photoyellowing of chemically modified chemithermomechanical pulps (CTMP) from Eucalyptus globulus under various atmospheres
- Selective purification of bleached spruce TMP process water by induced air flotation (IAF)
- Evaluation of the effects of compression combined with heat treatment by nanoindentation (NI) of poplar cell walls
- Measured temperature and moisture profiles during thermal modification of beech (Fagus sylvatica L.) and spruce (Picea abies L. Karst.) wood
- Modeling the influence of thermal modification on the electrical conductivity of wood
- Spruce fiber properties after high-temperature thermomechanical pulping (HT-TMP)
- Efficiency of visual strength grading of timber with respect to origin, species, cross section, and grading rules: a critical evaluation of the common standards
- Synthesis of alcohol-soluble phenol-formaldehyde resins from pyrolysis oil of Cunninghamia lanceolata wood and properties of molding plates made of resin-impregnated materials
- Enzymatic strategies to improve removal of hexenuronic acids and lignin from cellulosic fibers
- Phylogenetic analysis of major molds inhabiting woods. Part 4. Genus Alternaria
- Short Notes
- Comparison of hydrogenolysis with thioacidolysis for lignin structural analysis
- Detection of complex vascular system in bamboo node by X-ray μCT imaging technique
- Obituary
- Professor Gösta Brunow (1936–2013)
- Meetings
- Meetings