Article
Licensed
Unlicensed
Requires Authentication
Meetings
Published/Copyright:
September 27, 2013
Published Online: 2013-09-27
Published in Print: 2013-10-01
©2013 by Walter de Gruyter Berlin Boston
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Masthead
- Masthead
- Reviews
- Influence of the moisture content on the fracture characteristics of welded wood joint. Part 1: Mode I fracture
- Influence of the moisture content on the fracture characteristics of welded wood joint. Part 2: Mode II fracture
- Original Articles
- Molecular weight distributions of acetylated lignocellulosic biomasses recovered from an ionic liquid system
- Multivariate-parameter optimization of the alkaline peroxide mechanical pulp (APMP) process for larch (Larix gmelinii Rupr.) using Box-Behnken design
- Characterization of fiber development in high- and low-consistency refining of primary mechanical pulp
- Mechanical performance of yew (Taxus baccata L.) from a longbow perspective
- Predicting Douglas-fir wood density by artificial neural networks (ANN) based on progeny testing information
- The influence of lathe check depth and orientation on the bond quality of phenol-formaldehyde – bonded birch plywood
- Fire resistance of wood treated with various ionic liquids (ILs)
- Evaluation of cell wall reinforcement in feather keratin-treated waterlogged wood as imaged by synchrotron X-ray microtomography (μXRT) and TEM
- Drying of beech (Fagus sylvatica L.) timber in oscillation climates: drying time and quality
- Quantification of mobilized copper(II) levels in micronized copper-treated wood by electron paramagnetic resonance (EPR) spectroscopy
- Condensed conifer tannins as antifungal agents in liquid culture
- Meetings
- Meetings
Articles in the same Issue
- Masthead
- Masthead
- Reviews
- Influence of the moisture content on the fracture characteristics of welded wood joint. Part 1: Mode I fracture
- Influence of the moisture content on the fracture characteristics of welded wood joint. Part 2: Mode II fracture
- Original Articles
- Molecular weight distributions of acetylated lignocellulosic biomasses recovered from an ionic liquid system
- Multivariate-parameter optimization of the alkaline peroxide mechanical pulp (APMP) process for larch (Larix gmelinii Rupr.) using Box-Behnken design
- Characterization of fiber development in high- and low-consistency refining of primary mechanical pulp
- Mechanical performance of yew (Taxus baccata L.) from a longbow perspective
- Predicting Douglas-fir wood density by artificial neural networks (ANN) based on progeny testing information
- The influence of lathe check depth and orientation on the bond quality of phenol-formaldehyde – bonded birch plywood
- Fire resistance of wood treated with various ionic liquids (ILs)
- Evaluation of cell wall reinforcement in feather keratin-treated waterlogged wood as imaged by synchrotron X-ray microtomography (μXRT) and TEM
- Drying of beech (Fagus sylvatica L.) timber in oscillation climates: drying time and quality
- Quantification of mobilized copper(II) levels in micronized copper-treated wood by electron paramagnetic resonance (EPR) spectroscopy
- Condensed conifer tannins as antifungal agents in liquid culture
- Meetings
- Meetings