Home Technology Design of Compact Low Pass Microstrip Filter For Wireless Communication System
Article
Licensed
Unlicensed Requires Authentication

Design of Compact Low Pass Microstrip Filter For Wireless Communication System

  • Dhirendra Kumar EMAIL logo and Asok De
Published/Copyright: August 25, 2011
Become an author with De Gruyter Brill
Frequenz
From the journal Volume 65 Issue 5-6

Abstract

A compact microstrip low pass filter has been designed using step impedance technique. Two slots were cut in the ground plane just below the high impedance microstrip lines. The proposed filter has spurious free response for wide band width with sharp cut-off characteristics. The filter has been designed for a cutoff frequency 2.5 GHz and provides good agreement between the simulated and measured results.


Corresponding author: Dhirendra Kumar, Electronics and Communication Department, Maharaja Agrasen Instititute of Technology, GGSIP University, Sector 22, Rohini, Delhi – 110085.

Received: 2011-03-31
Published Online: 2011-08-25
Published in Print: 2011-July

Copyright © 2011 De Gruyter

Downloaded on 14.2.2026 from https://www.degruyterbrill.com/document/doi/10.1515/freq.2011.022/html
Scroll to top button