Home Design of a Miniaturized X-Band Diplexer Based on Novel One-Third-Mode Substrate Integrated Resonator Filters
Article
Licensed
Unlicensed Requires Authentication

Design of a Miniaturized X-Band Diplexer Based on Novel One-Third-Mode Substrate Integrated Resonator Filters

  • Hao Zhang EMAIL logo , Wei Kang and Wen Wu
Published/Copyright: June 8, 2017
Become an author with De Gruyter Brill

Abstract

In this paper, a miniaturized diplexer designed with two novel one-third-mode substrate integrated resonator (OTMSIR) filters has been presented. The one-third triangular resonator cavity with two transmission zeros (TZs) and two transmission poles is investigated. TZs are implemented by taking cross couplings of lower order modes in this design. The diplexer is then obtained by integrating two different sizes of OTMSIR filters with a common T-junction structure. A X-band diplexer operating at 10 GHz and 11.5 GHz is designed on a substrate with a dielectric constant of 3.55 to verify the above design concept. This novel structure features more compact size, better transmission performance, higher out of band rejection and easier integration compared with other circuits. A good agreement is obtained between the simulations and the measured results.

Reference

[1] R. Garg, I. Bahl, and M. Bozzi, Microstrip Lines and Slotlines, 3rd ed.. Norwood, MA, USA: Artech House, 2013.Search in Google Scholar

[2] S. Srisathit, S. Patisang, R. Phromloungsri, S. Bunnjaweht, S. Kosulvit, and M. Chongcheawchamnan, “High isolation and compact size microstrip hairpin diplexer,” IEEE Microw. Wireless Compon. Lett., vol. 15, no. 2, pp. 101–103, 2005.10.1109/LMWC.2004.842839Search in Google Scholar

[3] B. Strassner and K. Chang, “Wide-band low-loss high-isolation microstrip periodic-stub diplexer for multiple-frequency applications,” IEEE Trans. Microw. Theory Tech., vol. 49, no. 10, pp. 1818–1820, 2001.10.1109/22.954789Search in Google Scholar

[4] Y. Toutain, C. Person, and J.-P. Coupez, “Design and implementation of a compact microstrip Tx/Rx diplexer for UMTS equipments,” Int. Conf. Micro., Radar Wireless Commun., vol. 1, pp. 187–190, 2002.Search in Google Scholar

[5] C.-H. Chen, T.-Y. Huang, C.-P. Chou, and R.-B. Wu, “Microstrip diplexers design with common resonator sections for compact size, but high isolation,” IEEE Trans. Microw. Theory Tech., vol. 54, no. 5, pp. 1945–1952, May. 2006.10.1109/TMTT.2006.873613Search in Google Scholar

[6] M. Bozzi, A. Georgiadis, and K. Wu, “Review of substrate integrated waveguide (SIW) circuits and antennas,” IET Microwaves, Antennas and Propagation, vol. 5, no. 8, pp. 909–920, June. 2011.10.1049/iet-map.2010.0463Search in Google Scholar

[7] L. Zhaolong and K. Wu, “24-GHz frequency-modulation continuous-wave radar front-end system-on-substrate,” IEEE Trans Microw Theory Tech, vol. 56, no. 2, pp. 278–285, Feb. 2008.10.1109/TMTT.2007.914363Search in Google Scholar

[8] Y.-L. Zhang, W. Hong, K. Wu, J.-X. Chen, and H.-J. Tang, “Novel substrate integrated waveguide cavity filter with defected ground structure,” IEEE Trans. Microw. Theory Tech., vol. 53, no. 4, pp. 1280–1287, 2005.10.1109/TMTT.2005.845750Search in Google Scholar

[9] Y. Q. Wang, W. Hong, Y. Dong, B. Liu, H.-J. Tang, J. Chen, X. Yin, and K. Wu, “Half mode substrate integrated waveguide (HMSIW) bandpass filter,” IEEE Microw. Wireless Compon. Lett., vol. 17, no. 4, pp. 265–267, 2007.10.1109/LMWC.2007.892958Search in Google Scholar

[10] B. Liu, W. Hong, Y.-Q. Wang, Q.-H. Lai, and K. Wu, “Half mode substrate integrated waveguide (HMSIW) 3-dB coupler,” IEEE Microw. Wireless Compon. Lett., vol. 17, no. 1, pp. 22–24, 2007.10.1109/LMWC.2006.887244Search in Google Scholar

[11] C. Jin, A. Alphones, and L.-C. Ong, “Broadband leaky-wave antenna based on composite right/left handed substrate integrated waveguide,” Electron. Lett., vol. 46, no. 24, pp. 1584–1585, 2010.10.1049/el.2010.2628Search in Google Scholar

[12] C. Jin and A. Alphones, “Leaky-wave radiation behavior from adouble periodic composite right/left handed substrate integrated waveguide,” IEEE Trans. Antennas Propag, vol. 60, no. 4, pp. 1727–1735, 2012.10.1109/TAP.2012.2186248Search in Google Scholar

[13] K. Gong, W. Hong, Y. Zhang, P. Chen, and C.-J. You, “Substrate integrated waveguide quasi-elliptic filters with controllable electric and magnetic mixed coupling,” IEEE Trans. Microw. Theory Tech., vol. 60, no. 10, pp. 3071–3078, 2012.10.1109/TMTT.2012.2209437Search in Google Scholar

[14] Y. Dong and T. Itoh, “Substrate integrated waveguide loaded by complementary split-ring resonators for miniaturized diplexer design,” IEEE Microw. Wireless Compon. Lett., vol. 21, no. 1, pp. 10–12, Jan. 2011.10.1109/LMWC.2010.2091263Search in Google Scholar

[15] S. Sirci, J.-D. Martínez, J. Vague, and V.-E. Boria, “Substrate integrated waveguide diplexer based on circular triplet combline filters,” IEEE Microw. Wireless Compon. Lett., vol. 25, no. 7, pp. 430–432, July. 2015.10.1109/LMWC.2015.2427516Search in Google Scholar

[16] C. Y. Zheng, F. Xu, and S. J. Qiu, “Investigation of planar wide band quadruple-mode filter based on substrate integrated waveguide,” IEEE MTT-S Int. Microw. Workshop Ser., Adv. Mater. Processes. RF and THz Appl. \(IMWS-AMP\) pp. 1–3, 2015. DOI: 10.1109/IMWS-AMP.2015.7325045.Search in Google Scholar

[17] S. Amari and U. Rosenberg, “Characteristics of cross (bypass) coupling through higher/lower order modes and their applications in elliptic filter design,” IEEE Trans. Microw. Theory Tech., vol. 53, no. 10, pp. 3135–3141, Oct. 2005.10.1109/TMTT.2005.855359Search in Google Scholar

Received: 2016-12-14
Published Online: 2017-6-8
Published in Print: 2017-12-20

© 2018 Walter de Gruyter GmbH, Berlin/Boston

Downloaded on 19.9.2025 from https://www.degruyterbrill.com/document/doi/10.1515/freq-2016-0363/html
Scroll to top button