Home Compact LPF Using T-shaped Resonator
Article
Licensed
Unlicensed Requires Authentication

Compact LPF Using T-shaped Resonator

  • H. Sariri EMAIL logo , Z. Rahmani , A. Lalbakhsh and S. Majidifar
Published/Copyright: July 5, 2013
Become an author with De Gruyter Brill

Abstract

A novel microstrip lowpass filter based on a T-shaped resonator is proposed in this paper that presents wide stopband and compact size. A method of scaling is applied to and studied on the proposed resonator in order to tune its response parameters. To achieve wide stopband, a suppressing cell is designed and connected in series form to the resonator. The resulting filter is then fabricated and measured. Simulated and measured results of the proposed filter verify its advantages over those presented in the references in terms of stopband-width and physical size.

PACS® (2010): 84.40.Az

Correction Note

This article was originally published under the DOI 10.1515/freq-2012-0043 by mistake.


Received: 2012-4-22
Published Online: 2013-7-5
Published in Print: 2013-1-18

©2013 by De Gruyter

Downloaded on 9.9.2025 from https://www.degruyterbrill.com/document/doi/10.1515/freq-2012-1043/pdf
Scroll to top button