Published Online: 2013-8-31
Published in Print: 2006-12-1
© 2013 by Walter de Gruyter GmbH & Co.
Articles in the same Issue
- Stabilization of commercial polyacrylonitrile fibres for fabrication of low-cost medium-strength carbon fibres
- Annealing effects on the electrical conductivity of polymerized liquid crystalline 3,4-ethylenedioxythiophene derivatives
- Polyketone Nanocomposites by Palladium-Catalyzed Ethylene-Carbon Monoxide-(Propene) Co(Ter)polymerization Inside an Unmodified Layered Silicate
- Synthesis and Homopolymerization of the Olefin- Derived Acrylic Monomer, 1-Methyl-1-Propyl-Hexyl Acrylate
- Synthesis and evaluation of pH-sensitive glycopolymers for oral drug delivery systems
- Plasma polymerization of tetrafluoroethylene – towards CF2 dominated fluorocarbon films
- A Novel Approach For Synthesizing Composite Polymer Electrolytes with a Stereocomplex Poly(methyl meth acrylate) for electrochromic devices
- High-throughput experimentation applied to atom transfer radical polymerization: Automated optimization of the copper catalysts removal from polymers
- DEA and DSC study of cubic silsesquioxane epoxy resin nanocomposites
- Monitoring morphology and properties of hybrid organicinorganic materials from in situ polymerization of tetraethoxysilane in polyimide polymer: 1. Effect of the coupling agent on the microstructure and interfacial interaction
- Homopolymerization of a highly polar zwitterionic methacrylate in ionic liquids and its copolymerization with a non-polar methacrylate
- Phase Behavior of Weakly-segregated Multiblock Copolymers with Two-scale Periodic Architecture
- Characterization of polydimethylsiloxane rubber upon photochemical, thermal, salt-fog ageings and exposure to acid vapours
- Effect of organoclay impurities on mechanical properties of EVA-layered silicate nanocomposites
- Synthesis and Characterization of a Novel Triblock Copolymer Containing Double-hydrophilic Blocks and Poly(fluoroalkyl methacrylate) Block via Oxyanioninitiated Polymerization
- First GPC results of terpyridine based chain extended supramolecular polymers: comparison with viscosity and analytical ultracentrifugation
- Thiodiethylene glycol based polyesters: synthesis and thermal characterization
- Hybrid Microgels Containing Gold Nanoparticles
- Activation of organoclays and preparation of polyethylene nanocomposites
- Study on synthesis and characterization of novel optically active poly(amide-imide)s based on bis(p-aminobezoic acid)-N-trimellitylimido-S-valine via direct polycondensation
- Characterization and photoinduced properties of photo chromic polymers. 1. Polyesterimides with 4-amino 4´-nitro azobenzene moieties
- Aggregation of Blends of Poly(N-vinyl pyrrolidone) and End-functional Polystyrene in Aqueous Solution
- Processing, rheology and structure of melt compounded PBTclay nanocomposites having different chemical composition.
- The Attenuated Total Reflection Infrared Analysis of Surface Crystallinity of Polyhydroxyalkanoates
- Synthesis of cationic flocculants based on acrylamide and [2-(acryloyloxy)ethyl]trimethylammonium chloride co polymers by semicontinuous inverse microemulsion co polymerization. Part I: Criteria for selection of comonomer formulation
- Investigation of the ion permeability of poly(p-xylylene) films
- Highly Stereospecific Polymerizations of 1,3-Butadiene with Cobalt(II) Pyridyl Bis(imine) Complexes
- Influence of Porosity on the Fragmentation of Ziegler-Natta Catalyst in the Early Stages of Propylene Polymerization
- Energy Storage in Cold Non-elastic Deformation of Glassy Polymers
- Emulsion copolymerization of hydrophobic and hydrophilic monomers: an experimental study with styrene and 2- hydroxyethyl methacrylate
- Removal of Pentachlorophenol from Water Using Novel Smart Hydrogel Microspheres
- Synthesis and characterization of glycosylated nano particles
- Luminescent polyvinylpyrrolidone/ZnO hybrid nanofibers membrane prepared by electrospinning
- Impact Modification of Polyoxymethylene (POM)
- Chemistry and Applications of Phosphorylated Chitin and Chitosan
- Mesomorphic Phase Behavior in Comb-like Polymer- Surfactant Complex
- Fluorescence Study of Fılm Formatıon From Hard/ Soft Latex Blends
- Synthesis of cationic flocculants based on acrylamide and [2-(acryloyloxy)ethyl]trimethylammonium chloride copolymers by semicontinuous inverse microemulsion polymerization. Part II: influence of initiator addition conditions, initial temperature, pH and comonomer concentration on flocculating performance
- Molecular weight and contraction factors of hyperbranched poly(urea-urethane)s
- Macroporous 4-Vinylpyridine-divinylbenzene – Estimation of Pore Volume, Surface Area, and Pore Size Distribution
- Modification of NR/BR blend with unsaturated thermo plastic polyurethane; polyurethane synthesis, blend morphology, vulcanization, and vulcanizate properties
- Dynamic Dilution Effects in Polymeric Networks
- Studies on the Odd-Even Effect of Methylene Spacers in Bismaleimides
- Synthesis and Characterization of the Bismaleimides Containing Aliphatic-ether Chain for Microelectronics Application
- Synthesis and characterization of hyperbranched poly (sulfone-amine) modified β-cyclodextrin
- Novel Thermally Stable Poly(sulfone ether ester amide)s with Improved Solubility
- Development of Fast Gradient Separations for Different Polymethacrylates
- Use of new hydroxytelechelic cis-1,4-polyisoprene (HTPI) in the synthesis of polyurethanes (PUs): Influence of isocyanate and chain extender nature and their equivalent ratios on the mechanical and thermal properties of PUs
- Development and Characterization of Bismaleimides Containing Aliphatic Chain for Microelectronics Application
- Studies on the Preparation of Telechelic Polymers by Atom Transfer Radical Polymerization and Cross Coupling Processes
- The influence of 4,4’-bis(6-hydroxyhexoxy)biphenyl moieties on properties of polyurethanes based on 4,4’-methylenebis(cyclohexyl isocyanate)
- Direct Polyesterification of Pyridine-2,6-Dicarboxylic Acid and Poly(ethylene glycol) using Picryl Chloride as Condensing Agent
- Hyperbranched Polymers from Maleic Anhydride and Diethanolamine: Synthesis, Characterization and Solution Rheology
- Synthesis and some Mechanical Properties of Polysulfobetaine – Polyacrylamide Double Networks
- Synthesis of highly sulfonated polystyrene-based block copolymers soluble in tetrahydrofuran
- Comb-like copolymers of n-alkyl monoitaconates and styrene
- Synthesis and absorbency of gelatin-graft-poly(sodium acrylate-co-acrylamide) superabsorbent hydrogel with saltand pH-responsiveness properties
- Preparation and Characterization of Core-Shell Latex Containing PDMS in the Shell
- Synthesis of Well-defined Carbazole Group Labelled Polymer via RAFT Polymerization and Study on the Optical Properties
- Variable morphologies of poly(vinyl acetate)–montmorillonite nanocomposites obtained by emulsion polymerization in the presence of poly(vinyl pyrrolidone)
- Composition distribution of poly(propylene-g-styrene) synthesized by solid-state grafting of styrene onto spherical polypropylene reactor granules
- Functionalization of poly(vinyl alcohol) by addition of methacryloyl groups: characterization by FTIR and NMR and optimization of reaction conditions by RSM
- Preparation and characterization of post-derivatives from functional polystyrene (ATRP) with p-nitroanilineazomethine phenol and their thermal and optical study
- Preparation of a Novel Cellular Fiber: Control of Cell Density of the Fiber
- HPLC separation of ibuprofen and mefenamic acid using molecularly imprinted polymer as stationary phase
- Modification of poly(L-lactic acid) with L-lactic acid / citric acid oligomers
- Fractional isolation and structural characterisation of hemicellulosic polymers from delignified and ultrasonic irradiated sugarcane bagasse
- Role of magnesium complexes in the anionic polymerization of hexano-6-lactam
- Effect of Nematic Order Coupling on the Phase Diagrams of Side-Chain Polymer Gels with Liquid Crystal Solvent
- Effect of degree of substitution on the mechanical and thermomechanical properties of lauroyl cellulose ester films
- Synthesis and characterization of new phenanthrolinetriether copolymers with rotaxane architecture
- One-pot synthesis of PMMA/montmorillonite nanocomposites
- Atom transfer rearrangement radical polymerization of (2,4,6-trihalophenolato) Fe(II) / Ce(III) / Ce(IV) complexes in solid state
- Synthesis by oxidative polymerization of optically active, regioregular polythiophene from quinquethiophene monomer bearing chiral and n-dodecyl groups as substituents
- Ethylene Polymerization over Transition Metal Supported Catalysts. III. Vanadium
- Infrared study of the photochemical behaviour of aromatic Poly (ether urethanes)
- The Synthesis and Crystallization of Poly(vinylidene fluoride) in Supercritical CO2
- Water expandable polystyrene (WEPS): Part 4. Synthesis of the water expandable blend of polystyrene and poly(2,6- dimethyl-1,4-phenylene ether)
- Tuning morphologies of thermoset / thermoplastic blends Part 1: Kinetic modelling of epoxy-amine reactions using amine mixtures
- Tuning morphologies of thermoset / thermoplastic blends Part 2: Phase separation of poly(vinyl methyl ether), PVME, using amine mixtures as thermoset hardeners
- Thermal Oligomerisation of Cardanol
- Preparation and release behavior of pH and ionic sensitive chitosan/poly(vinylpyrrolidone) semi-IPN beads for coenzyme A
Articles in the same Issue
- Stabilization of commercial polyacrylonitrile fibres for fabrication of low-cost medium-strength carbon fibres
- Annealing effects on the electrical conductivity of polymerized liquid crystalline 3,4-ethylenedioxythiophene derivatives
- Polyketone Nanocomposites by Palladium-Catalyzed Ethylene-Carbon Monoxide-(Propene) Co(Ter)polymerization Inside an Unmodified Layered Silicate
- Synthesis and Homopolymerization of the Olefin- Derived Acrylic Monomer, 1-Methyl-1-Propyl-Hexyl Acrylate
- Synthesis and evaluation of pH-sensitive glycopolymers for oral drug delivery systems
- Plasma polymerization of tetrafluoroethylene – towards CF2 dominated fluorocarbon films
- A Novel Approach For Synthesizing Composite Polymer Electrolytes with a Stereocomplex Poly(methyl meth acrylate) for electrochromic devices
- High-throughput experimentation applied to atom transfer radical polymerization: Automated optimization of the copper catalysts removal from polymers
- DEA and DSC study of cubic silsesquioxane epoxy resin nanocomposites
- Monitoring morphology and properties of hybrid organicinorganic materials from in situ polymerization of tetraethoxysilane in polyimide polymer: 1. Effect of the coupling agent on the microstructure and interfacial interaction
- Homopolymerization of a highly polar zwitterionic methacrylate in ionic liquids and its copolymerization with a non-polar methacrylate
- Phase Behavior of Weakly-segregated Multiblock Copolymers with Two-scale Periodic Architecture
- Characterization of polydimethylsiloxane rubber upon photochemical, thermal, salt-fog ageings and exposure to acid vapours
- Effect of organoclay impurities on mechanical properties of EVA-layered silicate nanocomposites
- Synthesis and Characterization of a Novel Triblock Copolymer Containing Double-hydrophilic Blocks and Poly(fluoroalkyl methacrylate) Block via Oxyanioninitiated Polymerization
- First GPC results of terpyridine based chain extended supramolecular polymers: comparison with viscosity and analytical ultracentrifugation
- Thiodiethylene glycol based polyesters: synthesis and thermal characterization
- Hybrid Microgels Containing Gold Nanoparticles
- Activation of organoclays and preparation of polyethylene nanocomposites
- Study on synthesis and characterization of novel optically active poly(amide-imide)s based on bis(p-aminobezoic acid)-N-trimellitylimido-S-valine via direct polycondensation
- Characterization and photoinduced properties of photo chromic polymers. 1. Polyesterimides with 4-amino 4´-nitro azobenzene moieties
- Aggregation of Blends of Poly(N-vinyl pyrrolidone) and End-functional Polystyrene in Aqueous Solution
- Processing, rheology and structure of melt compounded PBTclay nanocomposites having different chemical composition.
- The Attenuated Total Reflection Infrared Analysis of Surface Crystallinity of Polyhydroxyalkanoates
- Synthesis of cationic flocculants based on acrylamide and [2-(acryloyloxy)ethyl]trimethylammonium chloride co polymers by semicontinuous inverse microemulsion co polymerization. Part I: Criteria for selection of comonomer formulation
- Investigation of the ion permeability of poly(p-xylylene) films
- Highly Stereospecific Polymerizations of 1,3-Butadiene with Cobalt(II) Pyridyl Bis(imine) Complexes
- Influence of Porosity on the Fragmentation of Ziegler-Natta Catalyst in the Early Stages of Propylene Polymerization
- Energy Storage in Cold Non-elastic Deformation of Glassy Polymers
- Emulsion copolymerization of hydrophobic and hydrophilic monomers: an experimental study with styrene and 2- hydroxyethyl methacrylate
- Removal of Pentachlorophenol from Water Using Novel Smart Hydrogel Microspheres
- Synthesis and characterization of glycosylated nano particles
- Luminescent polyvinylpyrrolidone/ZnO hybrid nanofibers membrane prepared by electrospinning
- Impact Modification of Polyoxymethylene (POM)
- Chemistry and Applications of Phosphorylated Chitin and Chitosan
- Mesomorphic Phase Behavior in Comb-like Polymer- Surfactant Complex
- Fluorescence Study of Fılm Formatıon From Hard/ Soft Latex Blends
- Synthesis of cationic flocculants based on acrylamide and [2-(acryloyloxy)ethyl]trimethylammonium chloride copolymers by semicontinuous inverse microemulsion polymerization. Part II: influence of initiator addition conditions, initial temperature, pH and comonomer concentration on flocculating performance
- Molecular weight and contraction factors of hyperbranched poly(urea-urethane)s
- Macroporous 4-Vinylpyridine-divinylbenzene – Estimation of Pore Volume, Surface Area, and Pore Size Distribution
- Modification of NR/BR blend with unsaturated thermo plastic polyurethane; polyurethane synthesis, blend morphology, vulcanization, and vulcanizate properties
- Dynamic Dilution Effects in Polymeric Networks
- Studies on the Odd-Even Effect of Methylene Spacers in Bismaleimides
- Synthesis and Characterization of the Bismaleimides Containing Aliphatic-ether Chain for Microelectronics Application
- Synthesis and characterization of hyperbranched poly (sulfone-amine) modified β-cyclodextrin
- Novel Thermally Stable Poly(sulfone ether ester amide)s with Improved Solubility
- Development of Fast Gradient Separations for Different Polymethacrylates
- Use of new hydroxytelechelic cis-1,4-polyisoprene (HTPI) in the synthesis of polyurethanes (PUs): Influence of isocyanate and chain extender nature and their equivalent ratios on the mechanical and thermal properties of PUs
- Development and Characterization of Bismaleimides Containing Aliphatic Chain for Microelectronics Application
- Studies on the Preparation of Telechelic Polymers by Atom Transfer Radical Polymerization and Cross Coupling Processes
- The influence of 4,4’-bis(6-hydroxyhexoxy)biphenyl moieties on properties of polyurethanes based on 4,4’-methylenebis(cyclohexyl isocyanate)
- Direct Polyesterification of Pyridine-2,6-Dicarboxylic Acid and Poly(ethylene glycol) using Picryl Chloride as Condensing Agent
- Hyperbranched Polymers from Maleic Anhydride and Diethanolamine: Synthesis, Characterization and Solution Rheology
- Synthesis and some Mechanical Properties of Polysulfobetaine – Polyacrylamide Double Networks
- Synthesis of highly sulfonated polystyrene-based block copolymers soluble in tetrahydrofuran
- Comb-like copolymers of n-alkyl monoitaconates and styrene
- Synthesis and absorbency of gelatin-graft-poly(sodium acrylate-co-acrylamide) superabsorbent hydrogel with saltand pH-responsiveness properties
- Preparation and Characterization of Core-Shell Latex Containing PDMS in the Shell
- Synthesis of Well-defined Carbazole Group Labelled Polymer via RAFT Polymerization and Study on the Optical Properties
- Variable morphologies of poly(vinyl acetate)–montmorillonite nanocomposites obtained by emulsion polymerization in the presence of poly(vinyl pyrrolidone)
- Composition distribution of poly(propylene-g-styrene) synthesized by solid-state grafting of styrene onto spherical polypropylene reactor granules
- Functionalization of poly(vinyl alcohol) by addition of methacryloyl groups: characterization by FTIR and NMR and optimization of reaction conditions by RSM
- Preparation and characterization of post-derivatives from functional polystyrene (ATRP) with p-nitroanilineazomethine phenol and their thermal and optical study
- Preparation of a Novel Cellular Fiber: Control of Cell Density of the Fiber
- HPLC separation of ibuprofen and mefenamic acid using molecularly imprinted polymer as stationary phase
- Modification of poly(L-lactic acid) with L-lactic acid / citric acid oligomers
- Fractional isolation and structural characterisation of hemicellulosic polymers from delignified and ultrasonic irradiated sugarcane bagasse
- Role of magnesium complexes in the anionic polymerization of hexano-6-lactam
- Effect of Nematic Order Coupling on the Phase Diagrams of Side-Chain Polymer Gels with Liquid Crystal Solvent
- Effect of degree of substitution on the mechanical and thermomechanical properties of lauroyl cellulose ester films
- Synthesis and characterization of new phenanthrolinetriether copolymers with rotaxane architecture
- One-pot synthesis of PMMA/montmorillonite nanocomposites
- Atom transfer rearrangement radical polymerization of (2,4,6-trihalophenolato) Fe(II) / Ce(III) / Ce(IV) complexes in solid state
- Synthesis by oxidative polymerization of optically active, regioregular polythiophene from quinquethiophene monomer bearing chiral and n-dodecyl groups as substituents
- Ethylene Polymerization over Transition Metal Supported Catalysts. III. Vanadium
- Infrared study of the photochemical behaviour of aromatic Poly (ether urethanes)
- The Synthesis and Crystallization of Poly(vinylidene fluoride) in Supercritical CO2
- Water expandable polystyrene (WEPS): Part 4. Synthesis of the water expandable blend of polystyrene and poly(2,6- dimethyl-1,4-phenylene ether)
- Tuning morphologies of thermoset / thermoplastic blends Part 1: Kinetic modelling of epoxy-amine reactions using amine mixtures
- Tuning morphologies of thermoset / thermoplastic blends Part 2: Phase separation of poly(vinyl methyl ether), PVME, using amine mixtures as thermoset hardeners
- Thermal Oligomerisation of Cardanol
- Preparation and release behavior of pH and ionic sensitive chitosan/poly(vinylpyrrolidone) semi-IPN beads for coenzyme A