Investigation of the effects of the types of food waste utilized as carbon source on the molecular weight distributions and thermal properties of polyhydroxybutyrate produced by two strains of microorganisms

Articles in the same Issue

1. Synthesis and characterization of unsaturated polyester resins cured by frontal polymerization
2. Solvation of poly(methyl acrylate) and poly(vinyl acetate) by CO₂ studied via atomistic Monte Carlo simulation techniques
3. Reversible addition fragmentation chain transfer (RAFT) polymerization of styrene in fluid CO₂
4. Interfacial irregularity induced by hydrogen bonds at the interface in immiscible polymer blends
5. Flocculation characteristics of organo-modified clay particles in poly(L-lactide) / montmorillonite hybrid systems
6. Interaction between sodium polystyrenesulfonate and Triton X-100 in aqueous solution
7. N-Alkylacrylamide copolymers with (meth)acrylamide derivatives of cholic acid: Solution properties and aggregation
8. Surface modification of polyamides by direct fluorination
9. Fractionation and ammonolytic degradation of poly(hexamethylene carbonate) in (supercritical) ammonia
10. Evolution of the partition coefficients of peroxide initiators during the synthesis of high-impact polystyrene
11. Characterization of an isophorone-based polyisocyanate
12. Degradation of unstabilised polypropylene and a propene- 1-pentene copolymer
13. Binary frontal polymerization: Velocity dependence on initial composition
14. Synthesis of a novel poly(p-phenylene-vinylene) derivative and its application in chemiresistive sensors for electronic noses with an unusual response to organic vapours
15. Poly(methyl methacrylate)-block-polystyrene and polystyrene-block-poly(n-butyl acrylate) as compatibilizers in PMMA/PnBA blends
16. Synthesis and characterization of 4-chloromethylstyrene polymers containing bulky organosilicon groups
17. Nucleation versus melting point depression of the polycaprolactone phase in polypropylene/polycaprolactone blends
18. Nafion-layered silicate nanocomposite membrane for fuel cell application
19. Conformational properties of dendritic polymers with variable branching functionality in their generational shells
20. Atom transfer radical polymerization of styrene initiated by the novel initiator N-bromosuccinimide
21. Plasticizing of isotactic polypropylene upon addition of hydrocarbon oils
22. Kinetic considerations on the mechanical behaviour of polypropylene + wood flour and polypropylene + sisal fibre blends
23. Permeability of multi-layer structures
24. Room temperature Monte Carlo study of the mechanical properties of thermoplastic polymers
25. Determination of wear of surfaces by scratch testing
26. Polymer/organoclay nanocomposites with biodegradable aliphatic polyester and its blends: preparation and characterization
27. Preparation and swelling behaviour of a novel anti-salt superabsorbent hydrogel based on kappa-carrageenan and sodium alginate grafted with polyacrylamide
28. Synthesis and characterization of a pressure-sensitive adhesive based on an isobutyl acrylate / 2-ethylhexyl acrylate copolymer
29. Characteristics of non-isothermal crystallization of polypropylene with and without talc
30. Electrorheology of conducting polyaniline composite particles
31. Investigation of the effects of the types of food waste utilized as carbon source on the molecular weight distributions and thermal properties of polyhydroxybutyrate produced by two strains of microorganisms
32. Scale-free power-law distribution of nonlinear polymers formed in a homeostatic system
33. Pre-treatment of CaCO₃ nanofiller by irradiation in the presence of vinyl monomers for the preparation of poly(vinyl acetate) composites
34. Effect of styrene/ethylene/butylene/styrene block copolymer on the dynamic mechanical behaviour and processability of high-impact polystyrene
35. New materials from degraded styrene-acrylonitrile and ethylene-propylene-diene copolymers
36. Silane pre-treatment of calcium carbonate nanofillers for polyurethane composites
37. Rheological behaviour of urea-formaldehyde adhesive resins
38. Metastable state of amphiphilic polysaccharide solutions
39. Removal of copper-based catalyst in atom transfer radical polymerization using different extraction techniques
40. Novel pattern formation in blends of asymmetric ABC triblock terpolymers
41. Distribution of clay particles in the spherulitic texture of poly(L-lactide)/organo-modified montmorillonite hybrids
42. Comparative dielectric studies of segmental mobility in novel polyurethanes
43. Dielectric and hydration properties of segmental polyurethanes
44. Molecular dynamics in polymeric systems
45. Application of dynamic mechanical analysis techniques to bismuth telluride based thermoelectric materials
46. Small-angle neutron scattering study of shear-induced phase separation in aqueous poly(N-isopropylacrylamide) solutions
47. Macromolecular design of the network structure of copolymers of ethylene glycol dimethacrylate with methyl methacrylate using the catalytic chain transfer reaction
48. Effects of a pulsatile magnetic field on the atom transfer radical polymerization of 2-hydroxyethyl methacrylate in methanol
49. Gel formation in frontal polymerization of 2-hydroxyethyl methacrylate
50. Some experimental results for the end-linked polydimethylsiloxane network system
51. On the durability of low-density polyethylene nanocomposites
52. Polymerization of styrene using 1,1,2,2-tetraphenyl-1,2- ethanediol as initiator in the presence of 2,2,6,6-tetramethyl- 1-piperidinyloxy
53. Modified chitosan, 7 Graft copolymerization of methacrylonitrile onto chitosan using ammonium persulfate initiator
54. Formation of superlattices in blends of 3-miktoarm star terpolymers with diblock copolymers
55. Molar mass characterization of hydrophilic copolymers, 1 Size exclusion chromatography of neutral and anionic (meth)acrylate copolymers
56. Preparation of chitosan-containing nanofibres by electrospinning of chitosan/poly(ethylene oxide) blend solutions
57. Studies on flocculation of clay suspension by polyacrylamide
58. Hydrogels from chitosan crosslinked with poly(ethylene glycol) diacid as bone regeneration materials
59. AB Block-copolymers poly(oxyethylene)-blockpoly( dicyclohexyl itaconate): temperature dependence of the morphology
60. Magnetic hydrogel beads based on chitosan
61. Novel silicone-based capacitive pressure sensors with high sensitivity for biomedical applications
62. Degradation of networks composed of chitosan and polyacrylamide by a crude enzyme complex from Bacillus subtilis
63. Electrodeposition of mixed adherent thin films of poly(ethyl acrylate) and polyacrylonitrile onto nickel
64. Morphology and phase behaviour of poly(propylene oxide) containing copoly(ether ester)s
65. Deformation of the lamellar structure in semi-crystalline polymers studied by computer simulations
66. Turbulent drag reduction characteristics of amylopectin and its derivative
67. Molecular deformation mechanisms and mechanical properties of polymers simulated by molecular dynamics
68. Synthesis and characterization of novel polyamides based on tridecanedioic acid: Nylons 3 13, 5 13, 6 13, 7 13, 9 13, 10 13, 11 13
69. A study of aging in dental composites using IR and Raman spectroscopy
70. Synthesis and characterization of 1,4-diazophenylenebridged Cu-phthalocyanine polymer
71. Influence of the structure of new poly(amide-imide)s on their optical properties
72. The role of flow-induced crystallisation in melt spinning
73. Dynamic mechanical study of thermoplastic polyurethane/ polypropylene blends
74. Molecular and supramolecular approaches for tuning properties of new polyketanils
75. Synthesis and electrooptical characterization of polysiloxanes containing indolyl groups acting as photoconductive substrates for photorefractive materials
76. Scale-free power-law distribution of branched polymers formed in a continuously stirred tank reactor: Simple relationship for the exponent
77. Thermal stability of side-chain polymer liquid crystals
78. Electrospun poly(vinyl alcohol)/poly(acrylic acid) fibres with excellent water-stability
79. Time-temperature and time-stress correspondence in nonlinear creep. Experimental behaviour of amorphous polymers and quantitative modelling approaches
80. Properties of epoxy nanocomposites filled with carbon nanomaterials