Lid-Driven and Inclined Square Cavity Filled With a Nanofluid: Optimum Heat Transfer

Articles in the same Issue

1. Monitoring the future behaviour of urban drainage system under climate change: a case study from north-western England
2. An Adaptive Coordinated Control for an Offshore Wind Farm Connected VSC Based Multi-Terminal DC Transmission System
3. Thermoelastic bending analysis of laminated composite plates according to various shear deformation theories
4. The variational iteration method for solving the Volterra integro-differential forms of the Lane-Emden and the Emden-Fowler problems with initial and boundary value conditions
5. Preparation of Nano-Composite Ca₂−_αZn_α(OH)₄ with High Thermal Storage Capacity and Improved Recovery of Stored Heat Energy
6. Hydrodynamic investigation of fluvial sediment transport with Soil Protrusion Apparatus (SPA)
7. A reliable algorithm for positive solutions of nonlinear boundary value problems by the multistage Adomian decomposition method
8. Potential of Cognitive Computing and Cognitive Systems
9. Thermal and fluid flow characteristics in a tube equipped with peripherally-cut dual twisted tapes
10. Classical and numerical approaches to determining V-section band clamp axial stiffness
11. Mechanical Properties of Sandy Soil Improved with Cement and Nanosilica
12. Design & Performance of Wearable Ultra Wide Band Textile Antenna for Medical Applications
13. Solitary wave and shock wave solutions of (1+1)-dimensional perturbed Klein-Gordon,(1+1)-dimensional Kaup-Keperschmidt and (2+1)-dimensional ZK-BBM equations
14. Flat nose low velocity drop-weight impact response of carbon fibre composites using non-destructive damage detection techniques
15. Dynamical analysis of the avian-human influenza epidemic model using the semi-analytical method
16. Active Noise Control Experiments using Sound Energy Flu
17. A Cost-Effective Electric Vehicle Charging Method Designed For Residential Homes with Renewable Energy
18. Correlation between some technological parameters and properties of composite material based on recycled tires and polymer binder
19. OPTIMAL PID CONTROLLER DESIGN USING ADAPTIVE VURPSO ALGORITHM
20. Enumeration search method for optimisation of stacking sequence of laminated composite plates subjected to buckling
21. Optimal high speed CMOS inverter design using craziness based Particle Swarm Optimization Algorithm
22. Parameterization of a Conventional and Regenerated UHB Turbofan
23. Structural and mechanical defects of materials of offshore and onshore main gas pipelines after long-term operation
24. Damage Evaluation in Shear-Critical Reinforced Concrete Beam using Piezoelectric Transducers as Smart Aggregates
25. Direct determination of shape functions for isoparametric elements with arbitrary node configuration
26. Some Exploitation Properties of Wood Plastic Hybrid Composites Based on Polypropylene and Plywood Production Waste
27. Flow of River Tigris and its Effect on the Bed Sediment within Baghdad, Iraq
28. Topical Issue: 10th International Conference on Diffusion in Solids and Liquids
29. Preface to the Special Issue on Engineering Flow and Design
30. Impact of the pore solution on the aqueous diffusion through porous materials
31. A comparison of experimental results of soot production in laminar premixed flames
32. Constructal vascularized structures
33. Numerical Analysis including Pressure Drop in Oscillating Water Column Device
34. Multi-scale pin fins: Scale analysis and mathematical optimization of micro-pin fins arranged in rows
35. Lid-Driven and Inclined Square Cavity Filled With a Nanofluid: Optimum Heat Transfer
36. Topical Issue – 11th International Symposium SYMKOM 2014 IMP2
37. Modeling erosion in a centrifugal pump in an Eulerian-Lagrangian frame using OpenFOAM®
38. Sensitivity study of diffuser angle and brim height parameters for the design of 3 kW Diffuser Augmented Wind Turbine
39. Application of a compliant foil bearing for the thrust force estimation in the single stage radial blower
40. Experimental and numerical study on condensation in transonic steam flow
41. Time-frequency analysis of the Surge Onset in the Centrifugal Blower
42. Analysis of hot-wire measurements accuracy in turbulent boundary layer
43. Computational assessment of the influence of the overlap ratio on the power characteristics of a Classical Savonius wind turbine
44. An advanced CFD model to study the effect of non-condensable gas on cavitation in positive displacement pumps
45. Dynamical system analysis of unstable flow phenomena in centrifugal blower
46. Oil-free bearing development for high-speed turbomachinery in distributed energy systems – dynamic and environmental evaluation
47. CFD analysis of fluid flow in an axial multi-stage partial-admission ORC turbine
48. The influence of selected design and operating parameters on the dynamics of the steam micro-turbine
49. Designing and updating the flow part of axial and radial-axial turbines through mathematical modeling
50. Experimental investigation of the ORC system in a cogenerative domestic power plant with a scroll expanders
51. Steam turbine stress control using NARX neural network
52. Technical aspects of a large size industrial process turbo compressor revamp
53. A method for the assessment of operational severity for a high pressure turbine blade of an aero-engine
54. Numerical investigation of a GTM-140 turbojet engine
55. Design and numerical study of turbines operating with MDM as working fluid
56. Monitoring and diagnostics of special-purpose turbomachines