Article
Publicly Available
Frontmatter
Published/Copyright:
December 2, 2014
Published Online: 2014-12-02
Published in Print: 2014-11-29
©2014 by De Gruyter
Articles in the same Issue
- Frontmatter
- III–V Multijunction Solar Cell Integration with Silicon: Present Status, Challenges and Future Outlook
- Monolithic Integration of Diluted-Nitride III–V-N Compounds on Silicon Substrates: Toward the III–V/Si Concentrated Photovoltaics
- Study of the Growth and Dislocation Blocking Mechanisms in InxGa1−xAs Buffer Layer for Growing High-Quality In0.5Ga0.5P, In0.3Ga0.7As, and In0.52Ga0.48As on Misoriented GaAs Substrate for Inverted Metamorphic Multijunction Solar Cell Application
- Organic, Flexible, Polymer Composites for High-Temperature Piezoelectric Applications
- Modeling of a Bridge-Shaped Nonlinear Piezoelectric Energy Harvester
- Enhanced Vibration Energy Harvesting Through Multilayer Textured Pb(Mg1/3Nb2/3)O3–PbZrO3–PbTiO3 Piezoelectric Ceramics
- Load-Tolerant, High-Efficiency Self-Powered Energy Harvesting Scheme Using a Nonlinear Approach
- Comparative Analysis of One-Dimensional and Two-Dimensional Cantilever Piezoelectric Energy Harvesters
- Modeling of Hybrid Piezoelectrodynamic Generators
- Opto-electrical Behavior of Pb(Zn1/3Nb2/3)O3–Pb0.97La0.03(Zr,Ti)O3 Transparent Ceramics with Varying Defect Structure
- Feasibility Study for Small Scaling Flywheel-Energy-Storage Systems in Energy Harvesting Systems
- Ca0.15Zr0.85O1.85 Thin Film for Application to MIM Capacitor on Organic Substrate
- Erratum to EHS 1 (1–2), 69–78 (2014), A High-Temperature Thermoelectric Generator Based on Oxides
- A Direct Entropic Approach to Uniform and Spatially Continuous Dynamical Models of Thermoelectric Devices
Articles in the same Issue
- Frontmatter
- III–V Multijunction Solar Cell Integration with Silicon: Present Status, Challenges and Future Outlook
- Monolithic Integration of Diluted-Nitride III–V-N Compounds on Silicon Substrates: Toward the III–V/Si Concentrated Photovoltaics
- Study of the Growth and Dislocation Blocking Mechanisms in InxGa1−xAs Buffer Layer for Growing High-Quality In0.5Ga0.5P, In0.3Ga0.7As, and In0.52Ga0.48As on Misoriented GaAs Substrate for Inverted Metamorphic Multijunction Solar Cell Application
- Organic, Flexible, Polymer Composites for High-Temperature Piezoelectric Applications
- Modeling of a Bridge-Shaped Nonlinear Piezoelectric Energy Harvester
- Enhanced Vibration Energy Harvesting Through Multilayer Textured Pb(Mg1/3Nb2/3)O3–PbZrO3–PbTiO3 Piezoelectric Ceramics
- Load-Tolerant, High-Efficiency Self-Powered Energy Harvesting Scheme Using a Nonlinear Approach
- Comparative Analysis of One-Dimensional and Two-Dimensional Cantilever Piezoelectric Energy Harvesters
- Modeling of Hybrid Piezoelectrodynamic Generators
- Opto-electrical Behavior of Pb(Zn1/3Nb2/3)O3–Pb0.97La0.03(Zr,Ti)O3 Transparent Ceramics with Varying Defect Structure
- Feasibility Study for Small Scaling Flywheel-Energy-Storage Systems in Energy Harvesting Systems
- Ca0.15Zr0.85O1.85 Thin Film for Application to MIM Capacitor on Organic Substrate
- Erratum to EHS 1 (1–2), 69–78 (2014), A High-Temperature Thermoelectric Generator Based on Oxides
- A Direct Entropic Approach to Uniform and Spatially Continuous Dynamical Models of Thermoelectric Devices