Implementation of a Segmented PLL for Readout of Highly Sensitive SAW Magnetometers

Articles in the same Issue

1. A Novel Energy Modulator Design Concept for FLASH Proton Therapy
2. Highly conformal thin-film coating on 3Dprinted, open-porous structures using TiO2 ALD
3. Development of tubular nonwoven structures via a melt electrospinning process with the possibility of customisation
4. Scalable manufacturing of microphysiological systems to extend the production volume
5. Use of experimental ray tracing for locally resolved characterization of progressive addition and contact lenses
6. Evaluation of maximum overhang angles for the support-free additive manufacturing of calcium phosphate cement structures
7. Design of Experiment Approach to determine the effects of Tinuvin 622, recycling and sterilization by γ- irradiation on a medical polypropylene copolymer
8. Analytical approaches for evaluating chlorhexidine and hydroxyapatite content in 3D-printed resins for biomedical applications
9. Two-component periodontal depot for sustained release of Chlorhexidine
10. Determination of polyethylene glycol content in binary polymer blends by size exclusion chromatography with regard to polydispersity
11. Pacemaker Lead Insulations – Elaboration of an Oxidizing Test Solution for Comparative Assessment of in vitro Biostability
12. Enzymatic Degradation of a g-Cyclodextrin- Hyaluronic Acid Copolymer
13. Prolonged stability and biocompatibility testing of an alginate hydrogel cochlear implant coating under simulated inner ear conditions
14. Laser-induced periodic surface structures for controlled cell growth on vascular stents
15. Manufacture and characterisation of PLLA films with incorporated cobalt metalparticles
16. Magnetic hydrogels functionalized with Divi- Divi extract for tissue engineering
17. Methods for characterization of nanofiber nonwovens for biomedical applications – overview and future demands
18. Evaluation of potential biomaterials for temporary undescended testicle protection
19. Degradation Behavior of an Amino Acid- Substituted Polyphosphazene with Triethyl Citrate as Plasticizer
20. Resistance Development in Escherichia coli Against Far-UVC Irradiation
21. Polyurethan-based scaffolds for cardiovascular implant devices
22. Human Lower Leg Parameter Estimation using a Passive Exoskeleton Structure
23. Generative design for individual orthopaedic insoles: Optimisation of load distribution and additive manufacturing
24. Investigating the permeability properties of covered stents according to international standards and beyond
25. Planar stent segment expansion as multiaxial validation load case for stent development
26. Influence of fluid viscosity on membrane permeability: considerations for extending standard testing
27. Investigation of Fatigue Resistance of a Selfexpanding Polymer Microstent for the Fallopian tube under Accelerated Cyclic Loading
28. Mechanical analysis of braided dissection stents – Influence of stent foreshortening on radial force behaviour
29. Classification Of Walking Patterns From sEMG Using Hybrid CNN-LSTM Model
30. Patient-Specific Finite Element Modeling of Refractive Surgery Biomechanics: Technical Assessment of PRK, LASIK, and KLEx
31. FemStent – A Microstructured Polymer Stent for Enhanced Gamete Transport in Proximal Tubal Occlusion
32. Radial force and expansion behavior of an elliptical transcatheter aortic valve replacement in a bicuspid aortic valve
33. Cluster Analysis of Volumetric Calcification Distributions in the Aortic Valve Region of TAVR Patients
34. ULTRASHORT TIME ECHO MRI SEQUENCE TO QUANTIFY VERTEBRAL BONE MORPHOLOGY IN YOUNG ADULTS
35. The Most Efficient Spectrum for 3D Scanning of Human Skin
36. Radiopacity of Implants – Micro-CT Compared to Standardized Medical Imaging
37. Enhanced Clinical CT Image Resolution through Multi-Planar Reconstruction for Improved Bone-Implant Simulations
38. 3D Magnetomotive Displacement Estimation of Magnetic Nanoparticles using a Matrix Transducer
39. Characterization of a new fluorescence lifetime imaging ophthalmoscope and its comparison to the gold standard
40. Enhancing Ovarian Tumor Segmentation with Attention-Driven Adaptation of MedSAM
41. Plasma Temperature-Based Tissue Differentiation Using Laser-Induced Breakdown Spectroscopy (LIBS) for Laser- Guided Osteotomy
42. Evaluation strategy for image acquisition protocols in confocal microscopy mosaic imaging of the cornea
43. Detection of fiber structure and calcification in xenogeneic pericardium by OCT
44. Fast and user-friendly multi-spectra Mueller matrix polarimeter for fresh tissue biopsy imaging
45. Aimed Breathing into Different Parts of the Lung
46. Determining the thickness of convoluted cell layers in microtomography
47. Gold Nanoparticle-Based Breath Test Device for Rapid Detection of Infections
48. Extended mBvD Model for MEMS Delta-E Magnetic Field Sensors
49. Impedance Modeling of Magnetometers: A Path Toward Low-Noise Readout Circuits
50. Comparative irradiation experiments on porcine corneal endothelial cells at 222 nm and 254 nm
51. Environmental impact of single-use versus reusable flexible endoscopes: a systematic review
52. Reduction of Electromagnetic Interference in ultra-low noise Bimodal MEG & EEG
53. Evaluating the Vibration Exposure of a Power-Assisted Liposuction Device Using a 3D-Printed Finger Adapter
54. In-vitro modelling and measurement of focused ultrasound fields for use in sonodynamic therapy
55. Implementation of a Segmented PLL for Readout of Highly Sensitive SAW Magnetometers
56. Data-Driven Approach for Left Ventricular Volume Estimation using Intracardiac Admittance
57. Development of a Dynamic Fluid Phantom - Setup and Validation for an Optical Sensor
58. Feasibility of Orthogonal Taguchi Arrays for Determining Parameter Trends in MDT
59. Hand-Powered Centrifugal Platform for Fast Plasma-Based Diagnostics
60. Development of a Sensor-Based System for Stroke Rehabilitation: Home-Based Dual-Task Training for the Paretic Arm
61. Introducing an Automated Experimental Setup to Evaluate Different Flushing Processes of Leftovers from Parenteral Nutrition in Cannulas
62. SonoMap – Automated Ultrasound Documentation in Paediatric Care
63. Hydration management system for sports and health care applications – Fundamental considerations and early development
64. Piloting Photoplethysmographic Smartphone- Based Atrial Fibrillation Screening in Austria
65. The PRIS-Tool. Preparing for clinical studies
66. Model-Based Multilayer Registration of the Left Ventricle Using CT Imaging
67. Analysis of Microphony at Electrodes under Dynamic Flow by Mechanical Excitation
68. Air-liquid interface micro-electrode arrays - well-adapted tools for long-term in vitro monitoring of 3D neural tissues
69. Integrating Heart-on-Chip Technology and 3D Porcine Living Myocardial Slices for Cardiotoxicity Screening
70. Differences of Hjorth Parameters Between Healthy Population and Patients with Valvular Heart Disease in Electrocardiograms, Seismocardiograms, and Gyrocardiograms
71. Generation of Artificial Pressure Ulcer Images Using Deep Convolutional GANs
72. Speech biomarkers for automated depression level detection
73. Radial pulse rate estimation from brightness-mode ultrasound imaging
74. About the Comparison and Evaluation of Real-Valued Multimodal Medical Point Clouds
75. Concept Study for Treatment of Biofilm on Bone Tissue by Blue Light Irradiation
76. Image Segmentation for Automatic Needle Puncture Annotation in Vibroacoustic Signals
77. Development of a Low-Cost Electrodynamic Fatigue Testing System with Automated Sine Wave Quality Assessment
78. Contactless Measurement of Pulse Transit Time Between Upper Extremities During Simulated Stenosis
79. Explaining a Sex-Related Cardiovascular Risk Continuum
80. Automatic Labeling of Multi-Modal Sensor Training Data for Hand Gesture Analysis
81. Influence of Pacemaker Artifacts on Deep Neural Networks for ECG Classification
82. Simplified inverse model for basic lumen shape identification
83. Passive Acoustic Mapping of Cavitation in Heterogeneous Speed of Sound Distributions using the Fast Marching Method
84. ML-Driven Contamination Classification for XPS Analysis of PLA Surfaces
85. Hybrid Machine Learning Approach for Seizure Detection Using Hjorth Parameters in EEG Signals
86. Analysis of differences between contact and non-contact estimation of blood pressure
87. Distance Measurement in Minimally Invasive Surgery Based on Instrument Segmentation
88. Superpixel-Based Endmember Extraction for Hyperspectral Endometriosis Detection
89. Predicting Deep Brain Stimulation Outcomes Using Intra-Operative Stimulation Test Data
90. Detection of Negative Arterial to End-Tidal CO2 Gradients in Mechanically Ventilated Neonatal Lambs
91. Bayesian Optimization Driven Cancer Drug Dose-Response Curve Discovery
92. The Influence of Human Annotation on CNN Performance for Anomaly Detection in ICU Data
93. Visual field-based machine learning model for predicting disease stage in glaucoma
94. Comparing a rule-based decision tree to an LSTM network for the detection of ineffective efforts during expiration in neonates
95. Gamifying the Mini-Cog: A Narrative-Based Digital Approach to Cognitive Screening
96. Analysis of Performance Limitations of a Widely Used Lung Simulator
97. Human in vitro endometriosis microphysiological system
98. Influence of neck tissue conductivities on the phrenic nerve activation threshold during non-invasive electrical stimulation
99. Evaluating the Effects of Left Bundle Branch Block in an Electromechanical Heart Model
100. Model-in-the-Loop Simulation of Mechanical Ventilation in Neonates
101. In vitro test bench for investigating cell adhesion in hydrocephalus shunts
102. In Silico Clinical-Trials: Advancing Validation for Regulatory Approval
103. Mimicking Vascular Mechanics: Endothelial Response to Dynamic Deformation on a Hybrid Membrane
104. Bayesian input model selection for wrist control by a bionic hand
105. Lumen reconstruction of covered stents for numerical simulation of thrombosis risk
106. Evaluating the Suitability of a Neonatal Respiratory System Model for the Simulation of Arterial Partial Pressures
107. Computational Fluid Dynamics in Preterm Neonatal Airways: Insights into Airflow Dynamics and Aerosol Deposition
108. Individualized Hand Pose Control: A Patient Study
109. Assessing sit-to-stand motion execution using 6D IMUs only - A proof of concept
110. Investigating the Effect of Sitting Position on Upper Body Range of Motion in Cross-Country Sit Skiing
111. Real-Time Pose Estimation of Preterm Infants Using Depth Images
112. Brace Effects on Spatiotemporal Gait Parameters from Pedobarography in Adolescent Idiopathic Scoliosis
113. Comparison of sensor localization methods for Optically Pumped Magnetometers
114. Experimental validation of a test setup for hydrodynamic characterization of hydrocephalus shunts
115. Multimodal Measurement and Stimulation System to Investigate the Effects of Noninvasive Electrical Stimulation of the Phrenic Nerve
116. Analysis of porcine nerves as ex vivo model for upper limb neuro-electrode implantation studies
117. Molecular and Optical Degradation Pathways in Polyimide Substrates: An Accelerated Aging Study for Implantable Devices
118. Towards Multi-Class Optically Pumped Magnetometer-Based Brain-Computer Interfaces
119. Influence of body position on bioelectrical impedance analysis
120. Non-Contact Heart Rate and Respiration Rate Monitoring for Elderly Care
121. Event based acceleration measurement and fall detection
122. The Demand and the Path to Trustworthy Continuous Blood Glucose Monitoring
123. Abdominal Perfusion visualized by Electrical Impedance Tomography
124. Evaluation of an Optimized Telemedicine Platform for Needs-Based Care in Outpatient Nursing
125. Conceptual Design of HMI and eHMI for an Autonomous Patient Transport System
126. Intuitive Control of a Robotic Arm via Inertial Sensors and EMG for Assistive Applications
127. Optimizing Reachability and Wrench Estimation in Robotic Ultrasound via Probe Holder Geometry
128. Cable-driven parallel robots for human interaction: Approaches and applications
129. Exploring Welding Techniques for the Integration of Pneumatic Artifical Muscles into a Soft Everting Robot
130. Development of a robotic test stand for testing vibroacoustic sensor units in needle insertion experiments
131. Evaluation of the reconstruction accuracy of 3D robotic ultrasound on in-vitro phantoms for the geometrical characterization of abdominal aortic aneurysms
132. Adaptive Ensemble Learning for Robust Surgical Phase Recognition
133. An Energy-Optimized Medical Oxygen Concentrator for Low-Resource Settings
134. Integrating biological tissue suturing into minimally-invasive surgical training with the Lübecker Toolbox simulator
135. Surgical Instrument Detection on the Instrument Stand using Neural Networks
136. Spatio-Temporal Transformer for Surgical Instrument Recognition in Computer Aided Surgeries
137. Portable gait-asymmetry detection using lowcost hardware and machine learning
138. Unobtrusive Reflectance Photoplethysmography for Detecting and Severity Grading of Sleep Apnea via Oxygen Desaturation Index
139. Development of a Universal, Portable Bluetooth Low Energy (BLE) Data Logger for Biomedical Sensor Applications
140. Predicting ECG Age in 24-hour Holter Recordings of Heart Failure Patients
141. Effects of Wrist Sensor Placement on PPG Signal Quality
142. Generation of realistic multi-energetic cone-beam CT datasets based on medical software phantoms