Abstract
This paper studies a monopolist’s choices of quality and shelf life of a perishable good in the presence of demand uncertainty and sunk production cost. It shows that, in response to demand uncertainty, the firm typically produces multiple products which differ in quality and shelf life; under certain conditions, products with a longer shelf life are of lower quality; a probability distribution of demand which first-order (second-order) stochastically dominates another induces more (more or fewer) product varieties. It also provides conditions under which a higher quality product has a higher absolute profit margin but a lower percentage margin.
Proof of Proposition 1
The proof of part (1) is as follows. Consider the maximization problem (2). For the case of corner solution q = 0, the product is not produced. Thus, we consider the case where q > 0. The first order conditions with respect to q and T are
where (11) holds with inequality only if the corner solution T = 1 occurs.
Differentiating (10) with respect to p yields
I next show, evaluated at the optimal solution,
By (10),
Because v′(q) > 0, 0 < δ < 1, 0 ≤ p ≤ 1, and T ≥ 1,
By (10) again,
Because v′′(q) < 0 and
Because v′′(q) < 0 and v(0) = 0,
Similarly, because
Note that the left side of (16) is the partial derivative of F with respect to T. Thus,
By (12), if
The proof of part (2) is as follows. The interior solution to the maximization problem (2) satisfies the first order conditions
Furthermore, by the second order condition, ∀p, the matrix
evaluated at the interior solution, is negative semi-definite. Hence, its determinant is non-negative, i.e. det H ≥ 0.
By the Implicit Function Theorem, if the determinant of the matrix
evaluated at the interior solution, is not zero, i.e. det I ≠ 0, then
Because det H ≥ 0, to determine the sign of
By (11), it can be verified that
where y ≡ (1 − p).
It can be verified that for
and thus
For some p, the corner solution T = 1 may occur, the optimal shelf life T in this case is constant in p. Therefore, for p ≥ p*, T decreases or non-increases in p. By part (1) of Proposition 1, the optimal quality increases in p. Thus, quality is negatively correlated with shelf life. □
Proof of Proposition 2
The proof of part (1) is as follows. Let n denote the quantity of products the firm provides for a period. First, I show if
Suppose n j−1 ≤ n < n j . Consider producing one more unit with quality q > 0 and shelf life T = 1. The (n + 1)th product yields an expected profit
Because
Because v(0) = 0, v′′(q) < 0, c(0, 1) = 0, and
and
Therefore,
Thus, π(q*) > 0. That is, producing one more unit with q = q* and T = 1 is profitable. Hence, n j−1 ≤ n < n j is impossible. By similar reasoning, it can be verified that n < n j−1 is also impossible. Therefore, n ≥ n j .
Next I show if
Suppose n
j
< n ≤ n
j+1. There must be n − n
j
units which have the same probability
where
Because v′′(q) < 0 and
and
Because
It can be verified that J′′(T) < 0, ∀T ≥ 0. Thus,
Similarly, because
Because J′′(T) < 0,
By (24) and (27), the right side of (28) is less than that of (29). Thus,
That is,
Therefore, n = n j . Because n j < n m , the market is partially covered.
If n = n j , the firm will divide the n j units into j groups. Each group has a different probability of being sold in a period from another. The products between groups are thus different. Otherwise, (10) will be violated. Hence, the number of varieties is j. This completes the proof of part (1).
Analogous to the proof of part (1), it can be verified that if
If
Proof of Proposition 3
Suppose under
Otherwise, if
Because L first-order stochastically dominates
Thus,
By the Proof of Proposition 2 again, (32) implies the quantity of products the firm provides in a period under L is no less than n
j
. Hence, the number of product varieties under L is no less than that under
Proof of Proposition 4
The proof of part (1) is as follows. Let F(⋅) and
Then it can be verified that, for all k ∈ {0, 1, …, m − 1},
I now show
It can be verified that the left side of (34) is equal to
I next show
This contradicts (33). Therefore,
If L induces full coverage of the market, by Proposition 2,
If the market completely collapses under L, by Proposition 2,
Thus,
The proof of part (2) is as follows. Suppose it is optimal for the firm to provide n
j
units for a period under L, for any j ∈ {1, 2, …, m − 1}. By Proposition 2,
Proof of Proposition 5
By part (1) of Proposition 2, if
Consider the n
k
− n
k−1 units which will be sold with a probability of P(k) in a period, ∀k ∈ {1, 2, …, j}. Let the optimal quality for these units is q
k
> 0. Because v′′(q) < 0 and
then
Because
Therefore, the optimal shelf life for these units is the corner solution T = 1.
By the first order condition of the firm’s maximization problem with respect to q (see (10)),
Because P(1) > P(2) > ⋯ > P(j), v′′(q) < 0, and
That is, there are j different quality levels. □
Proof of Proposition 6
Consider two products which have the same shelf life T* but different quality levels q 1 and q 2, where q 1 > q 2 > 0. Denote their respective absolute profit margins by AM 1 and AM 2. Then,
By (10),
Denote the two products’ respective percentage margins by PM 1 and PM 2. Then,
Consider the function
Because v′′(q) < 0 and
Proof of Proposition 7
The proof of part (1) is as follows. The incentive compatibility implies
and
By (38),
By (39),
Hence,
Because θ
h
> θ
l
> 0,
The proof of part (2) is as follows. First, I show the incentive compatibility constraint (6) is nonbinding for all
Because θ h > θ l > 0,
The incentive compatibility implies, for all q h ∈ Q h and the associated F h ,
Thus, for all
Analogously, it can be verified that the incentive compatibility constraint (7) is nonbinding for all
Next consider the incentive compatibility constraints (38) and (39). I first show (38) is binding. Suppose (38) is nonbinding, then the firm can increase its profit by raising
If
If
That is, (38) is nonbinding. This is a contradiction.
Because in equilibrium each consumer is indifferent among the products intended for his type, then if
References
Abel, A. B. 1983. “Market Structure and the Durability of Goods.” The Review of Economic Studies 50 (4): 625–37. https://doi.org/10.2307/2297765.Search in Google Scholar
Bakker, M., J. Riezebos, and R. H. Teunter. 2012. “Review of Inventory Systems with Deterioration Since 2001.” European Journal of Operational Research 221 (2): 275–84. https://doi.org/10.1016/j.ejor.2012.03.004.Search in Google Scholar
Carlton, D. W., and J. D. DanaJr. 2008. “Product Variety and Demand Uncertainty: Why Markups Vary with Quality.” The Journal of Industrial Economics 56 (3): 535–52. https://doi.org/10.1111/j.1467-6451.2008.00353.x.Search in Google Scholar
Dye, C.-Y. 2013. “The Effect of Preservation Technology Investment on a Non-instantaneous Deteriorating Inventory Model.” Omega 41 (5): 872–80. https://doi.org/10.1016/j.omega.2012.11.002.Search in Google Scholar
Dye, C.-Y., and T.-P. Hsieh. 2012. “An Optimal Replenishment Policy for Deteriorating Items with Effective Investment in Preservation Technology.” European Journal of Operational Research 218 (1): 106–12. https://doi.org/10.1016/j.ejor.2011.10.016.Search in Google Scholar
Dye, C.-Y., C.-T. Yang, and C.-C. Wu. 2018. “Joint Dynamic Pricing and Preservation Technology Investment for an Integrated Supply Chain with Reference Price Effects.” Journal of the Operational Research Society 69 (6): 811–24. https://doi.org/10.1057/s41274-017-0247-y.Search in Google Scholar
Eaton, B. C., and R. G. Lipsey. 1989. “Product Differentiation.” Handbook of Industrial Organization 1: 723–68.10.1016/S1573-448X(89)01015-0Search in Google Scholar
Goering, G. E. 1992. “Oligopolies and Product Durability.” International Journal of Industrial Organization 10 (1): 55–63. https://doi.org/10.1016/0167-7187(92)90047-3.Search in Google Scholar
Goyal, S. K., and B. C. Giri. 2001. “Recent Trends in Modeling of Deteriorating Inventory.” European Journal of Operational Research 134 (1): 1–16. https://doi.org/10.1016/s0377-2217(00)00248-4.Search in Google Scholar
Hsu, P., H. Wee, and H. Teng. 2010. “Preservation Technology Investment for Deteriorating Inventory.” International Journal of Production Economics 124 (2): 388–94. https://doi.org/10.1016/j.ijpe.2009.11.034.Search in Google Scholar
Janssen, L., T. Claus, and J. Sauer. 2016. “Literature Review of Deteriorating Inventory Models by Key Topics from 2012 to 2015.” International Journal of Production Economics 182: 86–112. https://doi.org/10.1016/j.ijpe.2016.08.019.Search in Google Scholar
Johnson, J. P., and D. P. Myatt. 2003. “Multiproduct Quality Competition: Fighting Brands and Product Line Pruning.” The American Economic Review 93 (3): 748–74. https://doi.org/10.1257/000282803322157070.Search in Google Scholar
Lancaster, K. 1990. “The Economics of Product Variety: A Survey.” Marketing Science 9 (3): 189–206. https://doi.org/10.1287/mksc.9.3.189.Search in Google Scholar
Li, R., H. Lan, and J. R. Mawhinney. 2010. “A Review on Deteriorating Inventory Study.” Journal of Service Science and Management 3 (1): 117–29. https://doi.org/10.4236/jssm.2010.31015.Search in Google Scholar
Liebowitz, S. J. 1982. “Durability, Market Structure, and New-Used Goods Models.” The American Economic Review 72 (4): 816–24.Search in Google Scholar
Mussa, M., and S. Rosen. 1978. “Monopoly and Product Quality.” Journal of Economic Theory 18 (2): 301–17. https://doi.org/10.1016/0022-0531(78)90085-6.Search in Google Scholar
Nahmias, S. 1982. “Perishable Inventory Theory: A Review.” Operations Research 30 (4): 680–708. https://doi.org/10.1287/opre.30.4.680.Search in Google Scholar
Parks, R. W. 1974. “The Demand and Supply of Durable Goods and Durability.” The American Economic Review 64 (1): 37–55.Search in Google Scholar
Raafat, F. 1991. “Survey of Literature on Continuously Deteriorating Inventory Models.” Journal of the Operational Research Society 42 (1): 27–37. https://doi.org/10.2307/2582993.Search in Google Scholar
Rong, Y., Y.-J. Chen, and Z.-J. M. Shen. 2015. “The Impact of Demand Uncertainty on Product Line Design under Endogenous Substitution.” Naval Research Logistics 62 (2): 143–57. https://doi.org/10.1002/nav.21619.Search in Google Scholar
Rust, J. 1986. “When is it Optimal to Kill off the Market for Used Durable Goods?” Econometrica: Journal of the Econometric Society 54 (1): 65–86. https://doi.org/10.2307/1914157.Search in Google Scholar
Schmalensee, R. 1974. “Market Structure, Durability, and Maintenance Effort.” The Review of Economic Studies 41 (2): 277–87. https://doi.org/10.2307/2296716.Search in Google Scholar
Schmalensee, R. 1979. “Market Structure, Durability, and Quality: A Selective Survey.” Economic Inquiry 17 (2): 177–96. https://doi.org/10.1111/j.1465-7295.1979.tb00307.x.Search in Google Scholar
Sieper, E., and P. L. Swan. 1973. “Monopoly and Competition in the Market for Durable Goods.” The Review of Economic Studies 40 (3): 333–51. https://doi.org/10.2307/2296454.Search in Google Scholar
Su, T. T. 1975. “Durability of Consumption Goods Reconsidered.” The American Economic Review 65 (1): 148–57.Search in Google Scholar
Swan, P. L. 1970. “Durability of Consumption Goods.” The American Economic Review 60 (5): 884–94.Search in Google Scholar
Swan, P. L. 1971. “The Durability of Goods and Regulation of Monopoly.” Bell Journal of Economics and Management Science 2 (1): 347–57. https://doi.org/10.2307/3003172.Search in Google Scholar
Swan, P. L. 1972. “Optimum Durability, Second-Hand Markets, and Planned Obsolescence.” Journal of Political Economy 80 (3): 575–85. https://doi.org/10.1086/259906.Search in Google Scholar
Waldman, M. 1996. “Durable Goods Pricing when Quality Matters.” Journal of Business 69 (4): 489–510. https://doi.org/10.1086/209702.Search in Google Scholar
Waldman, M. 2003. “Durable Goods Theory for Real World Markets.” The Journal of Economic Perspectives 17 (1): 131–54. https://doi.org/10.1257/089533003321164985.Search in Google Scholar
© 2023 Walter de Gruyter GmbH, Berlin/Boston
Articles in the same Issue
- Frontmatter
- Research Articles
- Screening with Privacy on (Im)persistency
- Quality, Shelf Life, and Demand Uncertainty
- Transfers and Resilience in Economic Networks
- Technology Adoption under Negative External Effects
- Management Centrality in Sequential Bargaining: Implications for Strategic Delegation, Welfare, and Stakeholder Conflict
- Financial and Operational Creditors in Bankruptcy Resolution: A General Equilibrium Approach Under Three Game-Theoretic Division Rules with an Application to India
- Product Differentiation and Trade
- A Theoretical Analysis of Collusion Involving Technology Licensing Under Diseconomies of Scale
- Product Quality and Product Compatibility in Network Industries
- How the Future Shapes Consumption with Time-Inconsistent Preferences
- Notes
- The Strategic Adoption of Environmental Corporate Social Responsibility with Network Externalities
- Strategic Environmental Corporate Social Responsibility (ECSR) Certification and Endogenous Market Structure
- A Note on a Moment Inequality
Articles in the same Issue
- Frontmatter
- Research Articles
- Screening with Privacy on (Im)persistency
- Quality, Shelf Life, and Demand Uncertainty
- Transfers and Resilience in Economic Networks
- Technology Adoption under Negative External Effects
- Management Centrality in Sequential Bargaining: Implications for Strategic Delegation, Welfare, and Stakeholder Conflict
- Financial and Operational Creditors in Bankruptcy Resolution: A General Equilibrium Approach Under Three Game-Theoretic Division Rules with an Application to India
- Product Differentiation and Trade
- A Theoretical Analysis of Collusion Involving Technology Licensing Under Diseconomies of Scale
- Product Quality and Product Compatibility in Network Industries
- How the Future Shapes Consumption with Time-Inconsistent Preferences
- Notes
- The Strategic Adoption of Environmental Corporate Social Responsibility with Network Externalities
- Strategic Environmental Corporate Social Responsibility (ECSR) Certification and Endogenous Market Structure
- A Note on a Moment Inequality