Model-based development of products, processes and production resources
-
Roman Dumitrescu
Roman Dumitrescu studied mechatronics at the University of Erlangen-Nuremberg and is now head of the product engineering department of the Fraunhofer Project Group Mechatronic Systems Design in Paderborn. His research interests are systems engineering, pattern based systems design and virtual prototyping.
Fraunhofer IPT, Project Group Mechatronic Systems Design, Zukunftsmeile 1, 33102 Paderborn, Germany
,
Christian Bremer
Christian Bremer studied mechanical engineering at the University of Paderborn and is now Research Associate at Fraunhofer IPT – project group mechatronic systems design. His research interest is Model-Based systems engineering.
Fraunhofer IPT, Project Group Mechatronic Systems Design, Zukunftsmeile 1, 33102 Paderborn, Germany
Arno Kühn studied industrial engineering and management at the University of Paderborn and is now group leader at the Fraunhofer Project Group Mechatronic Systems Design in Paderborn. His research interest are product planning and systems engineering.
Fraunhofer IPT, Project Group Mechatronic Systems Design, Zukunftsmeile 1, 33102 Paderborn, Germany
Ansgar Trächtler is Professor for Control Engineering and Mechatronics at Heinz Nixdorf Institute of the University of Paderborn and the head of the Project Group Mechatronic Systems Design of Fraunhofer IPT. His research interests are optimal control, automotive control, development methods for mechatronic systems and hardware-in-the-loop simulation.
Heinz Nixdorf Institute, University of Paderborn, Fürstenallee 11, 33102 Paderborn, Germany; and Fraunhofer IPT, Project Group Mechatronic Systems Design, Zukunftsmeile 1, 33102 Paderborn, Germany
Tanja Frieben studied mechanical engineering at the University of Paderborn and has been working as Research Associate at Heinz Nixdorf Institute of the University of Paderborn; now she is with Phoenix Contact. Her research interest are modeling of mechatronic systems, methods for effective simulation and virtual commissioning of manufacturing plants.
PHOENIX CONTACT GmbH & Co. KG, Flachsmarktstr. 8, 32825 Blomberg, Germany
Abstract
This contribution applies methods and languages of Model-Based Systems Engineering to the field of production system engineering. The goal is an integrated modeling of objects, processes and systems. This approach improves knowledge transfer between the stakeholders involved and enables model-based design and verification.
Zusammenfassung
Dieser Beitrag wendet Methoden und Sprachen des Model-Based Systems Engineering auf das Gebiet der Produktionssystementwicklung an. Ziel ist die integrierte Modellierung von Objekten, Prozessen und Systemen. Damit verbessert der Ansatz den Wissenstransfer zwischen den Beteiligten und ermöglicht modellbasierten Entwurf und Test.
About the authors
Roman Dumitrescu studied mechatronics at the University of Erlangen-Nuremberg and is now head of the product engineering department of the Fraunhofer Project Group Mechatronic Systems Design in Paderborn. His research interests are systems engineering, pattern based systems design and virtual prototyping.
Fraunhofer IPT, Project Group Mechatronic Systems Design, Zukunftsmeile 1, 33102 Paderborn, Germany
Christian Bremer studied mechanical engineering at the University of Paderborn and is now Research Associate at Fraunhofer IPT – project group mechatronic systems design. His research interest is Model-Based systems engineering.
Fraunhofer IPT, Project Group Mechatronic Systems Design, Zukunftsmeile 1, 33102 Paderborn, Germany
Arno Kühn studied industrial engineering and management at the University of Paderborn and is now group leader at the Fraunhofer Project Group Mechatronic Systems Design in Paderborn. His research interest are product planning and systems engineering.
Fraunhofer IPT, Project Group Mechatronic Systems Design, Zukunftsmeile 1, 33102 Paderborn, Germany
Ansgar Trächtler is Professor for Control Engineering and Mechatronics at Heinz Nixdorf Institute of the University of Paderborn and the head of the Project Group Mechatronic Systems Design of Fraunhofer IPT. His research interests are optimal control, automotive control, development methods for mechatronic systems and hardware-in-the-loop simulation.
Heinz Nixdorf Institute, University of Paderborn, Fürstenallee 11, 33102 Paderborn, Germany; and Fraunhofer IPT, Project Group Mechatronic Systems Design, Zukunftsmeile 1, 33102 Paderborn, Germany
Tanja Frieben studied mechanical engineering at the University of Paderborn and has been working as Research Associate at Heinz Nixdorf Institute of the University of Paderborn; now she is with Phoenix Contact. Her research interest are modeling of mechatronic systems, methods for effective simulation and virtual commissioning of manufacturing plants.
PHOENIX CONTACT GmbH & Co. KG, Flachsmarktstr. 8, 32825 Blomberg, Germany
©2015 Walter de Gruyter Berlin/Boston
Articles in the same Issue
- Frontmatter
- Editorial
- Industrie 4.0
- Übersicht
- Industrie 4.0 – technological approaches, use cases, and implementation
- Cyber-physical production systems: roots from manufacturing science and technology
- Agents enabling cyber-physical production systems
- Methoden
- Plug & produce by modelling skills and service-oriented orchestration of reconfigurable manufacturing systems
- Requirements and concept for Plug-and-Work
- Data-driven anomaly detection in cyber-physical production systems
- User interfaces for cyber-physical systems
- Model-based development of products, processes and production resources
- Reference model of Industrie 4.0 service architectures
Articles in the same Issue
- Frontmatter
- Editorial
- Industrie 4.0
- Übersicht
- Industrie 4.0 – technological approaches, use cases, and implementation
- Cyber-physical production systems: roots from manufacturing science and technology
- Agents enabling cyber-physical production systems
- Methoden
- Plug & produce by modelling skills and service-oriented orchestration of reconfigurable manufacturing systems
- Requirements and concept for Plug-and-Work
- Data-driven anomaly detection in cyber-physical production systems
- User interfaces for cyber-physical systems
- Model-based development of products, processes and production resources
- Reference model of Industrie 4.0 service architectures
