Article
Open Access
Studies of Structural Changes in PAN Fibers with Various Initial Structures under the Influence of Thermal Treatment in Media
-
Ewa Marczak
,
Piotr Marczak
Published/Copyright:
August 21, 2019
Published Online: 2019-08-21
Published in Print: 2019-09-01
© 2019 Ewa Marczak et al., published by Sciendo
Articles in the same Issue
- An Investigation on the Performance of Modified Coir Spinning Machine
- Studies of Structural Changes in PAN Fibers with Various Initial Structures under the Influence of Thermal Treatment in Media
- Effect of Supercritical Carbon Dioxide on Dyeability and Physical Properties of Ultra-High-Molecular-Weight Polyethylene Fiber
- Design and Characterization of Periodically Conductive Woven Fabric
- Parameterization of Seersucker Woven Fabrics Using Laser Techniques
- Analysis on the Conformity between the Closed-Circuit Embroidery Elements of Different Widths and the Digitally Designed Elements
- A Method for Defect Detection of Yarn-Dyed Fabric Based on Frequency Domain Filtering and Similarity Measurement
- A New Simplified Model for Predicting the UV-Protective Properties of Monofilament PET Fabrics
- Effect of Fabric Layers on Thermal Comfort Properties of Multilayered Thermal Protective Fabrics
- Physical Properties and Wear Comfort of Bio-Fiber-Embedded Yarns and their Knitted Fabrics According to Yarn Structures
- Synthesis of Polymer Inclusion Membranes based on Cellulose Triacetate for Recovery of Lanthanum(III) from Aqueous Solutions
- Preparation of Silicone-Modified Acrylate Latex and its Application for Low-Emission Printing of PET Fibre
Keywords for this article
Polyacrylonitrile (PAN) fibers;
thermal treatment;
molecular structure;
physical microstructure;
Fourier transform infrared (FTIR);
wide-angle X-ray scattering (WAXS);
critical dissolution time (CDT)
Creative Commons
BY-NC-ND 4.0
Articles in the same Issue
- An Investigation on the Performance of Modified Coir Spinning Machine
- Studies of Structural Changes in PAN Fibers with Various Initial Structures under the Influence of Thermal Treatment in Media
- Effect of Supercritical Carbon Dioxide on Dyeability and Physical Properties of Ultra-High-Molecular-Weight Polyethylene Fiber
- Design and Characterization of Periodically Conductive Woven Fabric
- Parameterization of Seersucker Woven Fabrics Using Laser Techniques
- Analysis on the Conformity between the Closed-Circuit Embroidery Elements of Different Widths and the Digitally Designed Elements
- A Method for Defect Detection of Yarn-Dyed Fabric Based on Frequency Domain Filtering and Similarity Measurement
- A New Simplified Model for Predicting the UV-Protective Properties of Monofilament PET Fabrics
- Effect of Fabric Layers on Thermal Comfort Properties of Multilayered Thermal Protective Fabrics
- Physical Properties and Wear Comfort of Bio-Fiber-Embedded Yarns and their Knitted Fabrics According to Yarn Structures
- Synthesis of Polymer Inclusion Membranes based on Cellulose Triacetate for Recovery of Lanthanum(III) from Aqueous Solutions
- Preparation of Silicone-Modified Acrylate Latex and its Application for Low-Emission Printing of PET Fibre
