Article
Open Access
Investigation on Thermal Comfort Characteristics of Regenerated Bamboo and Cotton Woven Structured Fabrics
-
Zamir Ahmed Abro
Published/Copyright:
December 7, 2018
Published Online: 2018-12-07
Published in Print: 2018-12-01
© 2018 Zamir Ahmed Abro et al., published by Sciendo
Articles in the same Issue
- Investigation on Thermal Comfort Characteristics of Regenerated Bamboo and Cotton Woven Structured Fabrics
- Impact of Vertical and Horizontal Forces on the Seam in the Technological Process of Sewing Knit Fabrics
- Circular Economy — Challenges for the Textile and Clothing Industry
- Hyper-Heuristic Approach for Improving Marker Efficiency
- Modeling of Air Permeability of Knitted Fabric Using the Computational Fluid Dynamics
- Development of V-Shaped Compression Socks on Conventional Socks Knitting Machine
- Analysis Possibilities of Controlled Transport of Moisture in Woven Fabrics
- Implementing the Requirements of ISO 9001 and Improvement Logistics Processes in SMES Which Operate in the Textile Industry
- Electrospinning – 100 Years of Investigations and Still Open Questions of Web Structure Estimination
- Measurement of the Uniformity of Thermally Bonded Points in Polypropylene Spunbonded Non-Wovens Using Image Processing and its Relationship With Their Tensile Properties
- Development of Female Torso Classification and Method of Patterns Shaping
- Predicting Cotton Fibre Maturity by Using Artificial Neural Network
Keywords for this article
Ring spun yarn;
plain woven fabrics;
air permeability;
thermal conductivity
Creative Commons
BY-NC-ND 4.0
Articles in the same Issue
- Investigation on Thermal Comfort Characteristics of Regenerated Bamboo and Cotton Woven Structured Fabrics
- Impact of Vertical and Horizontal Forces on the Seam in the Technological Process of Sewing Knit Fabrics
- Circular Economy — Challenges for the Textile and Clothing Industry
- Hyper-Heuristic Approach for Improving Marker Efficiency
- Modeling of Air Permeability of Knitted Fabric Using the Computational Fluid Dynamics
- Development of V-Shaped Compression Socks on Conventional Socks Knitting Machine
- Analysis Possibilities of Controlled Transport of Moisture in Woven Fabrics
- Implementing the Requirements of ISO 9001 and Improvement Logistics Processes in SMES Which Operate in the Textile Industry
- Electrospinning – 100 Years of Investigations and Still Open Questions of Web Structure Estimination
- Measurement of the Uniformity of Thermally Bonded Points in Polypropylene Spunbonded Non-Wovens Using Image Processing and its Relationship With Their Tensile Properties
- Development of Female Torso Classification and Method of Patterns Shaping
- Predicting Cotton Fibre Maturity by Using Artificial Neural Network
