Article
Publicly Available
ON-LINE TECHNIQUE FOR MEASURING THICKNESS FOR THREE-DIMENSIONAL BRAIDED COMPOSITE MATERIAL PREFORMS
-
Zhenkai Wan
and
Jialu Li
Published/Copyright:
September 19, 2023
Published Online: 2023-09-19
Published in Print: 2005-12-01
© 2023 by Association of Universities for Textiles (AUTEX)
Articles in the same Issue
- NOVEL APPROACH TO STUDY COMPRESSION PROPERTIES IN TEXTILES
- FRICTORQ, ACCESSING FABRIC FRICTION WITH A NOVEL FABRIC SURFACE TESTER
- INVESTIGATIONS ON THE POSSIBILITY OF OBJECTIVE CHARACTERISATION OF SAILCLOTH
- VOLUME POROSITY AND PERMEABILITY IN DOUBLE-LAYER WOVEN FABRICS
- AN APPROACH TO THE ‘proKNIT’ SYSTEM AND ITS VALUE IN THE PRODUCTION OF WEFT-KNITTED FABRICS
- STUDIES ON CORN STARCH FILLED POLY (STYRENE-CO-BUTYL ACRYLATE) LATEX REINFORCED POLYESTER NONWOVEN FABRIC COMPOSITES
- ON-LINE TECHNIQUE FOR MEASURING THICKNESS FOR THREE-DIMENSIONAL BRAIDED COMPOSITE MATERIAL PREFORMS
- ADAPTING AND TUNING QUALITY MANAGEMENT IN SPINNING INDUSTRY
Keywords for this article
thickness measurement;
three-dimensional braided;
preform composite material;
eddy current resistance;
critical distance;
power spectrum
Articles in the same Issue
- NOVEL APPROACH TO STUDY COMPRESSION PROPERTIES IN TEXTILES
- FRICTORQ, ACCESSING FABRIC FRICTION WITH A NOVEL FABRIC SURFACE TESTER
- INVESTIGATIONS ON THE POSSIBILITY OF OBJECTIVE CHARACTERISATION OF SAILCLOTH
- VOLUME POROSITY AND PERMEABILITY IN DOUBLE-LAYER WOVEN FABRICS
- AN APPROACH TO THE ‘proKNIT’ SYSTEM AND ITS VALUE IN THE PRODUCTION OF WEFT-KNITTED FABRICS
- STUDIES ON CORN STARCH FILLED POLY (STYRENE-CO-BUTYL ACRYLATE) LATEX REINFORCED POLYESTER NONWOVEN FABRIC COMPOSITES
- ON-LINE TECHNIQUE FOR MEASURING THICKNESS FOR THREE-DIMENSIONAL BRAIDED COMPOSITE MATERIAL PREFORMS
- ADAPTING AND TUNING QUALITY MANAGEMENT IN SPINNING INDUSTRY
