Home Technology Three-Dimensional Fluid Flow Phenomena in the Blade End Wall Corner Region
Article
Licensed
Unlicensed Requires Authentication

Three-Dimensional Fluid Flow Phenomena in the Blade End Wall Corner Region

  • B.K. Hazarika, and R. Raj,
Published/Copyright: December 1, 1989
Become an author with De Gruyter Brill
Author Information
International Journal of Turbo and Jet Engines
From the journal International Journal of Turbo and Jet Engines Volume 6 Issue 3-4

Published Online: 1989-12

©2011 by Walter de Gruyter GmbH & Co.

Articles in the same Issue

  1. CONTENTS
  2. Measurements of Thermal Radiation in Pressurized Turbulent Flames
  3. Atomization Study in Jet Propulsion Lab. BIAA L A Survey Report
  4. Studies on Aerated-Liquid Atomization
  5. Application of the Vortex Cloud Method to Cascades
  6. Prediction of Turbulence Generated Random Vibrational Response of Turbomachinery Blading
  7. Optimization of the Arrangement of the Front and Rear Blade Rows of a Tandem Blade Cascade
  8. Influence of Gas-Injector Geometry on Atomization Performance of Aerated-Liquid Nozzles
  9. Holographic Interferometry for Flow Visualization Studies in High Speed Fans
  10. Drop Size Measurement in Heated Air Flow and Experimental Study on the Interdependence of Spray Characteristics and Evaporation
  11. Three-Dimensional Fluid Flow Phenomena in the Blade End Wall Corner Region
  12. On the Choice of Centrifugal Impellers Semi-Open or Closed
  13. Investigation and Experiment on a Short Dump-Diffuser of the Combustor
  14. 35MWIM5000 in Cogeneration Plant
  15. CFD for Engine-Airframe Integration
https://doi.org/10.1515/TJJ.1989.6.3-4.311

Articles in the same Issue

  1. CONTENTS
  2. Measurements of Thermal Radiation in Pressurized Turbulent Flames
  3. Atomization Study in Jet Propulsion Lab. BIAA L A Survey Report
  4. Studies on Aerated-Liquid Atomization
  5. Application of the Vortex Cloud Method to Cascades
  6. Prediction of Turbulence Generated Random Vibrational Response of Turbomachinery Blading
  7. Optimization of the Arrangement of the Front and Rear Blade Rows of a Tandem Blade Cascade
  8. Influence of Gas-Injector Geometry on Atomization Performance of Aerated-Liquid Nozzles
  9. Holographic Interferometry for Flow Visualization Studies in High Speed Fans
  10. Drop Size Measurement in Heated Air Flow and Experimental Study on the Interdependence of Spray Characteristics and Evaporation
  11. Three-Dimensional Fluid Flow Phenomena in the Blade End Wall Corner Region
  12. On the Choice of Centrifugal Impellers Semi-Open or Closed
  13. Investigation and Experiment on a Short Dump-Diffuser of the Combustor
  14. 35MWIM5000 in Cogeneration Plant
  15. CFD for Engine-Airframe Integration
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2026 De Gruyter Brill
Downloaded on 19.1.2026 from https://www.degruyterbrill.com/document/doi/10.1515/TJJ.1989.6.3-4.311/html
Scroll to top button