Article
        
        
            
                    
        
                
                
                    
                
                
            
            
                
            
            
            
            
            
            
        
    
    
    Licensed
                
                    
                    Unlicensed
                    
                    Requires Authentication
                
            
    
                
        
        Pressurized Fluidized-Bed Combustion: An Experimental Study with Lignite
- 
            
            
        V. Zakkay,
        
 , H. Clisset, , A. Ganesh, , P. Radhakrishnan, and K. Sellakumar, 
                            Published/Copyright:
                            
                                December 1, 1988
                            
                        
                    
                
            
  Published Online: 1988-12
 
©2011 by Walter de Gruyter GmbH & Co.
                                        
                                        You are currently not able to access this content.
                                    
                                    
                                    
                                        
                                        You are currently not able to access this content.
                                    
                                    
                                    Articles in the same Issue
- CONTENTS
 - Hostile Atmospheric Environment Effects on J e t Engines
 - Statistical Analysis of silicon Nitride (RBSN) Using the Short Span Bending Technique
 - Experimental Method for the Combustion Efficiency Calculation in a Reheat Duct
 - A Survey of Accelerated Vibratory Fatigue Test Method of Aero-Engine Compressor Blading
 - Combustion of Kerosene-Water Emulsions in a Gas Turbine Combustor
 - Performance of an Axial Compressor During Rotating Stall
 - Small Diameter Film Cooling Holes: The Influence of Hole Size and Pitch
 - Relative Flow Structure at Exit from an Axial Compressor Rotor in Rotating Stall
 - Experimental Study on Initial Atomization of Plain Jet Air Blast Atomizer by Multi-pulse Laser Photography
 - The Application of Artificial Intelligence Techniques for Turbomachinery Diagnostics
 - Flow at the Tip of a Forward Curved Centrifugal Fan
 - Analysis of the Influence of the End-Wall Boundary Layer Growth on the Performance of Multistage Compressors
 - Design and Testing of a 10KW Steam Turbine for Steam Turbochargers
 - Numerical Solution and Experimental Investigation of Highly Rotational Internal Flow
 - Lip Separate Flow Blowing and Analysis of Coherence of Inlet
 - Experimental Investigation of Tandem Blade Cascades with Double-Circular ARC Profiles
 - A Review of Methods of Estimating Performance Characteristics
 - Spray Research in BIAA: A Review
 - Thermal Efficiency of High Pressure Glycerin Sprays Produced by Fan-Jet Pressure Nozzles
 - The Prediction of Thermal ΝΟX in Gas Turbines
 - Conical Grid Plate Flame Stabilizers: Number and Size of Jet Shear Layers
 - Pressurized Fluidized-Bed Combustion: An Experimental Study with Lignite
 - Comparison Method for Complex Cycle Analysis
 - Displacement Brayton Cycle Engine Component Coupling with a Variable Speed Drive
 - An Approach to Performance Prediction of Gas-Wet Steam Turbo Expanders
 
Articles in the same Issue
- CONTENTS
 - Hostile Atmospheric Environment Effects on J e t Engines
 - Statistical Analysis of silicon Nitride (RBSN) Using the Short Span Bending Technique
 - Experimental Method for the Combustion Efficiency Calculation in a Reheat Duct
 - A Survey of Accelerated Vibratory Fatigue Test Method of Aero-Engine Compressor Blading
 - Combustion of Kerosene-Water Emulsions in a Gas Turbine Combustor
 - Performance of an Axial Compressor During Rotating Stall
 - Small Diameter Film Cooling Holes: The Influence of Hole Size and Pitch
 - Relative Flow Structure at Exit from an Axial Compressor Rotor in Rotating Stall
 - Experimental Study on Initial Atomization of Plain Jet Air Blast Atomizer by Multi-pulse Laser Photography
 - The Application of Artificial Intelligence Techniques for Turbomachinery Diagnostics
 - Flow at the Tip of a Forward Curved Centrifugal Fan
 - Analysis of the Influence of the End-Wall Boundary Layer Growth on the Performance of Multistage Compressors
 - Design and Testing of a 10KW Steam Turbine for Steam Turbochargers
 - Numerical Solution and Experimental Investigation of Highly Rotational Internal Flow
 - Lip Separate Flow Blowing and Analysis of Coherence of Inlet
 - Experimental Investigation of Tandem Blade Cascades with Double-Circular ARC Profiles
 - A Review of Methods of Estimating Performance Characteristics
 - Spray Research in BIAA: A Review
 - Thermal Efficiency of High Pressure Glycerin Sprays Produced by Fan-Jet Pressure Nozzles
 - The Prediction of Thermal ΝΟX in Gas Turbines
 - Conical Grid Plate Flame Stabilizers: Number and Size of Jet Shear Layers
 - Pressurized Fluidized-Bed Combustion: An Experimental Study with Lignite
 - Comparison Method for Complex Cycle Analysis
 - Displacement Brayton Cycle Engine Component Coupling with a Variable Speed Drive
 - An Approach to Performance Prediction of Gas-Wet Steam Turbo Expanders