On the Surface Roughness of Al-4%Cu/B4C Metal Matrix Composites Machined by Milling Operation

Mustafa Übeyli,; Adem Acır,; M. Serdar Karakaş,; Teyfik Demir,

doi:10.1515/SECM.2008.15.2.131

Startseite On the Surface Roughness of Al-4%Cu/B4C Metal Matrix Composites Machined by Milling Operation

Artikel Open Access

On the Surface Roughness of Al-4%Cu/B4C Metal Matrix Composites Machined by Milling Operation

Mustafa Übeyli, , Adem Acır, , M. Serdar Karakaş, und Teyfik Demir,

Veröffentlicht/Copyright: 1. Juni 2008

Artikel downloaden (PDF)

Veröffentlicht von

Veröffentlichen auch Sie bei De Gruyter Brill

Manuskript einreichen Informationen für Autor*innen

Aus der Zeitschrift Science and Engineering of Composite Materials Band 15 Heft 2

MLA
APA
Harvard
Chicago
Vancouver

MLA
APA
Harvard
Chicago
Vancouver

Übeyli,, Mustafa, Acır,, Adem, Karakaş,, M. Serdar and Demir,, Teyfik. "On the Surface Roughness of Al-4%Cu/B4C Metal Matrix Composites Machined by Milling Operation" Science and Engineering of Composite Materials, vol. 15, no. 2, 2008, pp. 131-140. https://doi.org/10.1515/SECM.2008.15.2.131

Übeyli,, M., Acır,, A., Karakaş,, M. & Demir,, T. (2008). On the Surface Roughness of Al-4%Cu/B4C Metal Matrix Composites Machined by Milling Operation. Science and Engineering of Composite Materials, 15(2), 131-140. https://doi.org/10.1515/SECM.2008.15.2.131

Übeyli,, M., Acır,, A., Karakaş,, M. and Demir,, T. (2008) On the Surface Roughness of Al-4%Cu/B4C Metal Matrix Composites Machined by Milling Operation. Science and Engineering of Composite Materials, Vol. 15 (Issue 2), pp. 131-140. https://doi.org/10.1515/SECM.2008.15.2.131

Übeyli,, Mustafa, Acır,, Adem, Karakaş,, M. Serdar and Demir,, Teyfik. "On the Surface Roughness of Al-4%Cu/B4C Metal Matrix Composites Machined by Milling Operation" Science and Engineering of Composite Materials 15, no. 2 (2008): 131-140. https://doi.org/10.1515/SECM.2008.15.2.131

Übeyli, M, Acır, A, Karakaş, M, Demir, T. On the Surface Roughness of Al-4%Cu/B4C Metal Matrix Composites Machined by Milling Operation. Science and Engineering of Composite Materials. 2008;15(2): 131-140. https://doi.org/10.1515/SECM.2008.15.2.131

Kopie

In die Zwischenablage kopiert

BibTeX EndNote RIS

Published Online: 2008-06

Artikel in diesem Heft

TABLE OF CONTENTS
Processing and Properties of a Ni-ZrO2 P/M Composite
Properties of Precast SFRCC Beams under Harmonic Load
Corrosion of C/SiC Composite in Water Vapor and Na2SO4 Vapor
On the Surface Roughness of Al-4%Cu/B4C Metal Matrix Composites Machined by Milling Operation
Review of Bond-Strength Models and Application on CFRPto- Concrete Bonded Joints across Crack
Effect of Styrene-Butadiene Rubber Electrolytes Modified with SnCl2, SrCl2 and Active Carbon

Zeitschrift durchsuchen In dieser Zeitschrift suchen

https://doi.org/10.1515/SECM.2008.15.2.131

Creative Commons

BY-NC-ND 3.0

Artikel in diesem Heft

TABLE OF CONTENTS
Processing and Properties of a Ni-ZrO2 P/M Composite
Properties of Precast SFRCC Beams under Harmonic Load
Corrosion of C/SiC Composite in Water Vapor and Na2SO4 Vapor
On the Surface Roughness of Al-4%Cu/B4C Metal Matrix Composites Machined by Milling Operation
Review of Bond-Strength Models and Application on CFRPto- Concrete Bonded Joints across Crack
Effect of Styrene-Butadiene Rubber Electrolytes Modified with SnCl2, SrCl2 and Active Carbon