Home Physical Sciences A NEW INJECTION MOLDING TECHNOLOGY FOR MICRO PARTS
Article
Licensed
Unlicensed Requires Authentication

A NEW INJECTION MOLDING TECHNOLOGY FOR MICRO PARTS

  • W. Michaeli, and A. Spennemann,
Published/Copyright: June 1, 2001
Become an author with De Gruyter Brill
Submit Manuscript Author Information
Journal of Polymer Engineering
From the journal Journal of Polymer Engineering Volume 21 Issue 2-3

Published Online: 2001-06

©2011 by Walter de Gruyter GmbH & Co.

Articles in the same Issue

  1. CONTENTS
  2. A NEW INJECTION MOLDING TECHNOLOGY FOR MICRO PARTS
  3. MICRO ASSEMBLY INJECTION MOLDING OF HYBRID MICROSYSTEMS
  4. DETERMINATION OF MECHANICAL PROPERTIES SUITABLE FOR MICRO SYSTEMS
  5. INFLUENCE OF CARBON BLACK PIGMENTATION ON THE LASER BEAM WELDING OF PLASTICS MICRO PARTS
  6. ULTRASONIC ANALYSIS OF MATERIAL BEHAVIOR OF POLYURETHANE SYSTEMS
  7. BLADDER REACTION INJECTION MOLDING: MANUFACTURING OF HOLLOW POLYURETHANE FOAM PARTS USING FLEXIBLE MOLD CORES
  8. BLOW ΑΙΧ - SIMULATION PROGRAM AS A DEVELOPMENT TOOL FOR THE BLOWN FILM EXTRUSION PROCESS
  9. POSSIBILITIES OF FILM CONTROL BY DIGITAL IMAGE PROCESSING
  10. PLASMA-ASSISTED LAYER DEPOSITION FOR THE OPTIMIZATION OF PERMEATION PROPERTIES
  11. THE USE OF MODERN TECHNOLOGIES IN THE DEVELOPMENT OF SIMULATION SOFTWARE
  12. COMPUTER-AIDED OPTIMIZATION OF EXTRUSION DIES
  13. REACTIVE BLENDING OF INCOMPATIBLE POLYMER SYSTEMS CONTAINING POLYAMIDE AND PET
  14. ANALYSIS OF RUBBER MIXING PROCESS IN THE TRANSFERMIX EXTRUDER
  15. NEW RESULTS OF MATERIAL CHARACTERIZATION FOR THE IMPROVED CALCULATION OF SHRINKAGE AND WARP AGE
  16. MEASUREMENT AND MODELLING OF THE FLOW BEHAVIOR OF THERMOPLASTIC POLYMERS AT LOW TEMPERATURES
  17. MINIMIZATION OF THE CYCLE TIME AND IMPROVEMENT OF THE MOLDED PART QUALITY BY THE USE OF OPTIMIZED PLASTICIZATION UNITS
  18. LSR THERMOPLASTIC COMBINATION PARTS IN TWO-COMPONENT INJECTION MOLDING
https://doi.org/10.1515/POLYENG.2001.21.2-3.87

Articles in the same Issue

  1. CONTENTS
  2. A NEW INJECTION MOLDING TECHNOLOGY FOR MICRO PARTS
  3. MICRO ASSEMBLY INJECTION MOLDING OF HYBRID MICROSYSTEMS
  4. DETERMINATION OF MECHANICAL PROPERTIES SUITABLE FOR MICRO SYSTEMS
  5. INFLUENCE OF CARBON BLACK PIGMENTATION ON THE LASER BEAM WELDING OF PLASTICS MICRO PARTS
  6. ULTRASONIC ANALYSIS OF MATERIAL BEHAVIOR OF POLYURETHANE SYSTEMS
  7. BLADDER REACTION INJECTION MOLDING: MANUFACTURING OF HOLLOW POLYURETHANE FOAM PARTS USING FLEXIBLE MOLD CORES
  8. BLOW ΑΙΧ - SIMULATION PROGRAM AS A DEVELOPMENT TOOL FOR THE BLOWN FILM EXTRUSION PROCESS
  9. POSSIBILITIES OF FILM CONTROL BY DIGITAL IMAGE PROCESSING
  10. PLASMA-ASSISTED LAYER DEPOSITION FOR THE OPTIMIZATION OF PERMEATION PROPERTIES
  11. THE USE OF MODERN TECHNOLOGIES IN THE DEVELOPMENT OF SIMULATION SOFTWARE
  12. COMPUTER-AIDED OPTIMIZATION OF EXTRUSION DIES
  13. REACTIVE BLENDING OF INCOMPATIBLE POLYMER SYSTEMS CONTAINING POLYAMIDE AND PET
  14. ANALYSIS OF RUBBER MIXING PROCESS IN THE TRANSFERMIX EXTRUDER
  15. NEW RESULTS OF MATERIAL CHARACTERIZATION FOR THE IMPROVED CALCULATION OF SHRINKAGE AND WARP AGE
  16. MEASUREMENT AND MODELLING OF THE FLOW BEHAVIOR OF THERMOPLASTIC POLYMERS AT LOW TEMPERATURES
  17. MINIMIZATION OF THE CYCLE TIME AND IMPROVEMENT OF THE MOLDED PART QUALITY BY THE USE OF OPTIMIZED PLASTICIZATION UNITS
  18. LSR THERMOPLASTIC COMBINATION PARTS IN TWO-COMPONENT INJECTION MOLDING
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2026 De Gruyter Brill
Downloaded on 17.2.2026 from https://www.degruyterbrill.com/document/doi/10.1515/POLYENG.2001.21.2-3.87/html
Scroll to top button