Article
Licensed
Unlicensed Requires Authentication

Optimal Design in Profile Extrusion Calibration

  • , , , , and
Published/Copyright: July 1, 1995
Become an author with De Gruyter Brill
Submit Manuscript Author Information
Journal of Polymer Engineering
From the journal Journal of Polymer Engineering Volume 14 Issue 4

Published Online: 1995-07

©2011 by Walter de Gruyter GmbH & Co.

Articles in the same Issue

  1. CONTENTS
  2. The Thermochemical and Dielectric Behavior of Unsaturated Polyester Resin During Cure
  3. A Study of Volatile Hydrocarbon Emission Control by Polyetherimide Hollow Fiber Membranes
  4. Impact Behaviour of Modified Talc Filled PP/LDPE Blends
  5. Photo-Oxidative Degradation of Polyethylene Greenhouse Film in a Harsh Environment
  6. Effect of MElt Annealing on the Strucutre and Properties of Polycarbonate/ Poly(Styrene-co-Acrylonitrile)/Poly(Ethylene-co-Propylene) Blend
  7. Functionalization of Wood Waste and Its Use in Polyester Type Composite. A Preliminary Study
  8. Optimal Design in Profile Extrusion Calibration
https://doi.org/10.1515/POLYENG.1995.14.4.295

Articles in the same Issue

  1. CONTENTS
  2. The Thermochemical and Dielectric Behavior of Unsaturated Polyester Resin During Cure
  3. A Study of Volatile Hydrocarbon Emission Control by Polyetherimide Hollow Fiber Membranes
  4. Impact Behaviour of Modified Talc Filled PP/LDPE Blends
  5. Photo-Oxidative Degradation of Polyethylene Greenhouse Film in a Harsh Environment
  6. Effect of MElt Annealing on the Strucutre and Properties of Polycarbonate/ Poly(Styrene-co-Acrylonitrile)/Poly(Ethylene-co-Propylene) Blend
  7. Functionalization of Wood Waste and Its Use in Polyester Type Composite. A Preliminary Study
  8. Optimal Design in Profile Extrusion Calibration
Downloaded on 13.4.2026 from https://www.degruyterbrill.com/document/doi/10.1515/POLYENG.1995.14.4.295/html
Scroll to top button