TABLE OF CONTENTS

Articles in the same Issue

1. TABLE OF CONTENTS
2. CAE/CAD/CAM in Plastics Processing
3. On the Extrudability of Polethylenes under Similar Processing Conditions
4. Calculation and Optimization of Melt Extruders
5. Basic Studies of Plow Visualization of Processing of Elastomers and Their Compounds: Internal Mixer and Extrusion
6. Behavior of Elastomer in Mixing with Carbon Black; Is It Flow or Deformation and Failure?
7. Extrusion of Elastomers
8. Extrusion of Mica-Reinforced Polypropylene: Surface Texture
9. Rheological Properties of Melt-Polymerized Aliphatic-Aromatic Copolyamides
10. Profile Development in Drawn Hollow Tubes
11. Flow Characterization of a Chemically Blown Polymeric Foam III
12. Fast Polymerization and Crystallization Kinetic Studies of Nylon 6 by Combined Use of Computerized Micro-Rim Machine and FT-IR
13. An Experimental Approach to the Study of High Speed PET Spinning
14. Studies on Dry Spinning of Polyurethane-Urea Elastomers: Theory and Experiment
15. A Rotating Annular Die to Control the Biaxial Orientation in Melt Processed Thermotropic Liquid Crystalline Cellulose Derivatives
16. Structural Characterization of Crystallinity and Crystalline Orientation in Simultaneously Biaxially Stretched and Annealed Polyethylene Terephthalate Films
17. Polystyrene Foam Sheet Expansion During Heating
18. The Processing of Thermoplastics Containing High Loadings of Long and Continuous Reinforcing Fibers
19. An Engineering Study of the Thermoforming Process: Experimental and Theoretical Considerations
20. Index