Home Profile Development in Drawn Hollow Tubes
Article
Licensed
Unlicensed Requires Authentication

Profile Development in Drawn Hollow Tubes

  • B.D. Freeman, , M.M. Denn, , R. Keunings, , G.E. Molau, and J. Ramos,
Published/Copyright: December 1, 1986
Become an author with De Gruyter Brill
Submit Manuscript Author Information
Journal of Polymer Engineering
From the journal Journal of Polymer Engineering Volume 6 Issue 1-4

Published Online: 1986-12

©2011 by Walter de Gruyter GmbH & Co.

Articles in the same Issue

  1. TABLE OF CONTENTS
  2. CAE/CAD/CAM in Plastics Processing
  3. On the Extrudability of Polethylenes under Similar Processing Conditions
  4. Calculation and Optimization of Melt Extruders
  5. Basic Studies of Plow Visualization of Processing of Elastomers and Their Compounds: Internal Mixer and Extrusion
  6. Behavior of Elastomer in Mixing with Carbon Black; Is It Flow or Deformation and Failure?
  7. Extrusion of Elastomers
  8. Extrusion of Mica-Reinforced Polypropylene: Surface Texture
  9. Rheological Properties of Melt-Polymerized Aliphatic-Aromatic Copolyamides
  10. Profile Development in Drawn Hollow Tubes
  11. Flow Characterization of a Chemically Blown Polymeric Foam III
  12. Fast Polymerization and Crystallization Kinetic Studies of Nylon 6 by Combined Use of Computerized Micro-Rim Machine and FT-IR
  13. An Experimental Approach to the Study of High Speed PET Spinning
  14. Studies on Dry Spinning of Polyurethane-Urea Elastomers: Theory and Experiment
  15. A Rotating Annular Die to Control the Biaxial Orientation in Melt Processed Thermotropic Liquid Crystalline Cellulose Derivatives
  16. Structural Characterization of Crystallinity and Crystalline Orientation in Simultaneously Biaxially Stretched and Annealed Polyethylene Terephthalate Films
  17. Polystyrene Foam Sheet Expansion During Heating
  18. The Processing of Thermoplastics Containing High Loadings of Long and Continuous Reinforcing Fibers
  19. An Engineering Study of the Thermoforming Process: Experimental and Theoretical Considerations
  20. Index
https://doi.org/10.1515/POLYENG.1986.6.1-4.171

Articles in the same Issue

  1. TABLE OF CONTENTS
  2. CAE/CAD/CAM in Plastics Processing
  3. On the Extrudability of Polethylenes under Similar Processing Conditions
  4. Calculation and Optimization of Melt Extruders
  5. Basic Studies of Plow Visualization of Processing of Elastomers and Their Compounds: Internal Mixer and Extrusion
  6. Behavior of Elastomer in Mixing with Carbon Black; Is It Flow or Deformation and Failure?
  7. Extrusion of Elastomers
  8. Extrusion of Mica-Reinforced Polypropylene: Surface Texture
  9. Rheological Properties of Melt-Polymerized Aliphatic-Aromatic Copolyamides
  10. Profile Development in Drawn Hollow Tubes
  11. Flow Characterization of a Chemically Blown Polymeric Foam III
  12. Fast Polymerization and Crystallization Kinetic Studies of Nylon 6 by Combined Use of Computerized Micro-Rim Machine and FT-IR
  13. An Experimental Approach to the Study of High Speed PET Spinning
  14. Studies on Dry Spinning of Polyurethane-Urea Elastomers: Theory and Experiment
  15. A Rotating Annular Die to Control the Biaxial Orientation in Melt Processed Thermotropic Liquid Crystalline Cellulose Derivatives
  16. Structural Characterization of Crystallinity and Crystalline Orientation in Simultaneously Biaxially Stretched and Annealed Polyethylene Terephthalate Films
  17. Polystyrene Foam Sheet Expansion During Heating
  18. The Processing of Thermoplastics Containing High Loadings of Long and Continuous Reinforcing Fibers
  19. An Engineering Study of the Thermoforming Process: Experimental and Theoretical Considerations
  20. Index
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 27.9.2025 from https://www.degruyterbrill.com/document/doi/10.1515/POLYENG.1986.6.1-4.171/html
Scroll to top button